[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1606896236-62780-5-git-send-email-yash.shah@sifive.com>
Date: Wed, 2 Dec 2020 13:33:56 +0530
From: Yash Shah <yash.shah@...ive.com>
To: linux-spi@...r.kernel.org, linux-serial@...r.kernel.org,
linux-pwm@...r.kernel.org, linux-i2c@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
devicetree@...r.kernel.org, linux-gpio@...r.kernel.org
Cc: broonie@...nel.org, gregkh@...uxfoundation.org,
aou@...s.berkeley.edu, lee.jones@...aro.org,
u.kleine-koenig@...gutronix.de, thierry.reding@...il.com,
andrew@...n.ch, peter@...sgaard.com, paul.walmsley@...ive.com,
palmer@...belt.com, robh+dt@...nel.org, bgolaszewski@...libre.com,
linus.walleij@...aro.org, sachin.ghadi@...ive.com,
Yash Shah <yash.shah@...ive.com>
Subject: [PATCH 4/4] riscv: dts: add initial board data for the SiFive HiFive Unmatched
Add initial board data for the SiFive HiFive Unmatched A00
Signed-off-by: Yash Shah <yash.shah@...ive.com>
---
arch/riscv/boot/dts/sifive/Makefile | 3 +-
.../riscv/boot/dts/sifive/hifive-unmatched-a00.dts | 253 +++++++++++++++++++++
2 files changed, 255 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
diff --git a/arch/riscv/boot/dts/sifive/Makefile b/arch/riscv/boot/dts/sifive/Makefile
index 6d6189e..74c47fe 100644
--- a/arch/riscv/boot/dts/sifive/Makefile
+++ b/arch/riscv/boot/dts/sifive/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb
+dtb-$(CONFIG_SOC_SIFIVE) += hifive-unleashed-a00.dtb \
+ hifive-unmatched-a00.dtb
diff --git a/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
new file mode 100644
index 0000000..b1c3c59
--- /dev/null
+++ b/arch/riscv/boot/dts/sifive/hifive-unmatched-a00.dts
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020 SiFive, Inc */
+
+#include "fu740-c000.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/* Clock frequency (in Hz) of the PCB crystal for rtcclk */
+#define RTCCLK_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "SiFive HiFive Unmatched A00";
+ compatible = "sifive,hifive-unmatched-a00", "sifive,fu740-c000",
+ "sifive,fu740";
+
+ chosen {
+ stdout-path = "serial0";
+ };
+
+ cpus {
+ timebase-frequency = <RTCCLK_FREQ>;
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x0 0x80000000 0x2 0x00000000>;
+ };
+
+ soc {
+ };
+
+ hfclk: hfclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <26000000>;
+ clock-output-names = "hfclk";
+ };
+
+ rtcclk: rtcclk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <RTCCLK_FREQ>;
+ clock-output-names = "rtcclk";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ temperature-sensor@4c {
+ compatible = "ti,tmp451";
+ reg = <0x4c>;
+ interrupt-parent = <&gpio>;
+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+ };
+
+ pmic@58 {
+ compatible = "dlg,da9063";
+ reg = <0x58>;
+ interrupt-parent = <&gpio>;
+ interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+ interrupt-controller;
+
+ regulators {
+ vdd_bcore1: bcore1 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microamp = <5000000>;
+ regulator-max-microamp = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_bcore2: bcore2 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <900000>;
+ regulator-min-microamp = <5000000>;
+ regulator-max-microamp = <5000000>;
+ regulator-always-on;
+ };
+
+ vdd_bpro: bpro {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <2500000>;
+ regulator-max-microamp = <2500000>;
+ regulator-always-on;
+ };
+
+ vdd_bperi: bperi {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microamp = <1500000>;
+ regulator-max-microamp = <1500000>;
+ regulator-always-on;
+ };
+
+ vdd_bmem: bmem {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3000000>;
+ regulator-max-microamp = <3000000>;
+ regulator-always-on;
+ };
+
+ vdd_bio: bio {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-min-microamp = <3000000>;
+ regulator-max-microamp = <3000000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo1: ldo1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <100000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo2: ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo3: ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo4: ldo4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo5: ldo5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <100000>;
+ regulator-max-microamp = <100000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo6: ldo6 {
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo7: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ldo8: ldo8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ regulator-always-on;
+ };
+
+ vdd_ld09: ldo9 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-min-microamp = <200000>;
+ regulator-max-microamp = <200000>;
+ };
+
+ vdd_ldo10: ldo10 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-min-microamp = <300000>;
+ regulator-max-microamp = <300000>;
+ };
+
+ vdd_ldo11: ldo11 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-min-microamp = <300000>;
+ regulator-max-microamp = <300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&qspi0 {
+ status = "okay";
+ flash@0 {
+ compatible = "issi,is25wp256", "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <50000000>;
+ m25p,fast-read;
+ spi-tx-bus-width = <4>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&spi0 {
+ status = "okay";
+ mmc@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3300 3300>;
+ disable-wp;
+ };
+};
+
+ð0 {
+ status = "okay";
+ phy-mode = "gmii";
+ phy-handle = <&phy0>;
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&gpio {
+ status = "okay";
+};
--
2.7.4
Powered by blists - more mailing lists