linux-kernel - [PATCH] arm64: dts: imx8mm-beacon: Fix WiFi Pinmuxing

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201202135950.22164-1-aford173@gmail.com>
Date:   Wed,  2 Dec 2020 07:59:50 -0600
From:   Adam Ford <aford173@...il.com>
To:     linux-arm-kernel@...ts.infradead.org
Cc:     aford@...conembedded.com, Adam Ford <aford173@...il.com>,
        Rob Herring <robh+dt@...nel.org>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Pengutronix Kernel Team <kernel@...gutronix.de>,
        Fabio Estevam <festevam@...il.com>,
        NXP Linux Team <linux-imx@....com>,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH] arm64: dts: imx8mm-beacon: Fix WiFi Pinmuxing

The WiFi chip is capable of communication at SDR104 speeds, and
the pinmux was configured to support this, but the sdhc1 controller
didn't properly reference the pinmux.  Enable 100Mhz and 200MHz pinmux
as was originally intended.

Fixes: 593816fa2f35 ("arm64: dts: imx: Add Beacon i.MX8m-Mini development kit")
Signed-off-by: Adam Ford <aford173@...il.com>

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 6de86a4f0ec4..90fd15e95798 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -217,8 +217,10 @@
 &usdhc1 {
 	#address-cells = <1>;
 	#size-cells = <0>;
-	pinctrl-names = "default";
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
 	bus-width = <4>;
 	non-removable;
 	cap-power-off-card;
-- 
2.17.1