| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <540b95ef-5815-d400-9214-87667c3b3777@xs4all.nl>
Date: Wed, 2 Dec 2020 16:14:31 +0100
From: Hans Verkuil <hverkuil@...all.nl>
To: Neil Armstrong <narmstrong@...libre.com>
Cc: linux-media@...r.kernel.org, linux-amlogic@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/4] media: meson: Add M2M driver for the Amlogic GE2D
Accelerator Unit
On 02/12/2020 15:56, Neil Armstrong wrote:
> Hi Hans,
>
> On 02/12/2020 13:40, Hans Verkuil wrote:
>> On 17/11/2020 09:44, Neil Armstrong wrote:
>>> The GE2D is a 2D accelerator with various features like configurable blitter
>>> with alpha blending, frame rotation, scaling, format conversion and colorspace
>>> conversion.
>>>
>>> The driver implements a Memory2Memory VB2 V4L2 streaming device permitting:
>>> - 0, 90, 180, 270deg rotation
>>> - horizontal/vertical flipping
>>> - source cropping
>>> - destination compositing
>>> - 32bit/24bit/16bit format conversion
>>>
>>> This adds the support for the GE2D version found in the AXG SoCs Family.
>>>
>>> The missing features are:
>>> - Source scaling
>>> - Colorspace conversion
>>> - Advanced alpha blending & blitting options
>>>
>>> Is passes v4l2-compliance SHA: ea16a7ef13a902793a5c2626b0cefc4d956147f3, 64 bits, 64-bit time_t
>>>
>>> Signed-off-by: Neil Armstrong <narmstrong@...libre.com>
>>> ---
>>> drivers/media/platform/Kconfig | 13 +
>>> drivers/media/platform/Makefile | 2 +
>>> drivers/media/platform/meson/ge2d/Makefile | 3 +
>>> drivers/media/platform/meson/ge2d/ge2d-regs.h | 360 ++++++
>>> drivers/media/platform/meson/ge2d/ge2d.c | 1091 +++++++++++++++++
>>> 5 files changed, 1469 insertions(+)
>>> create mode 100644 drivers/media/platform/meson/ge2d/Makefile
>>> create mode 100644 drivers/media/platform/meson/ge2d/ge2d-regs.h
>>> create mode 100644 drivers/media/platform/meson/ge2d/ge2d.c
>>>
>
> [...]
>
>>> +
>>> +#define DEFAULT_WIDTH 100
>>> +#define DEFAULT_HEIGHT 100
>>
>> That's a weird default value. I would expect to see some multiple of 8 here.
>
> Sure, whatever the HW is quite flexible, I took 100x100 from the other 2D accelerator drivers actually.
>
> [...]
>
>>> +
>>> +static void ge2d_stop_streaming(struct vb2_queue *vq)
>>> +{
>>> + struct ge2d_ctx *ctx = vb2_get_drv_priv(vq);
>>> + struct vb2_v4l2_buffer *vbuf;
>>> +
>>> + if (V4L2_TYPE_IS_OUTPUT(vq->type))
>>> + ctx->streamon_out = false;
>>> + else
>>> + ctx->streamon_cap = false;
>>
>> Do you need streamon_out/cap? Can't you use vb2_start_streaming_called() instead?
>
> Indeed, I'll switch to vb2_start_streaming_called & co.
>
> [...]
>
>>> +
>>> +static int vidioc_try_fmt_out(struct file *file, void *priv, struct v4l2_format *f)
>>> +{
>>> + const struct ge2d_fmt *fmt = find_fmt(f);
>>> +
>>> + f->fmt.pix.field = V4L2_FIELD_NONE;
>>> + f->fmt.pix.pixelformat = fmt->fourcc;
>>> +
>>> + if (f->fmt.pix.width > MAX_WIDTH)
>>> + f->fmt.pix.width = MAX_WIDTH;
>>> + if (f->fmt.pix.height > MAX_HEIGHT)
>>> + f->fmt.pix.height = MAX_HEIGHT;
>>> +
>>> + if (f->fmt.pix.width < 0)
>>> + f->fmt.pix.width = 0;
>>> + if (f->fmt.pix.height < 0)
>>> + f->fmt.pix.height = 0;
>>
>> width and height are unsigned, so this check is not needed.
>
> Ok
>
> [...]
>
>>> +
>>> +static int ge2d_s_ctrl(struct v4l2_ctrl *ctrl)
>>> +{
>>> + struct ge2d_ctx *ctx = container_of(ctrl->handler, struct ge2d_ctx,
>>> + ctrl_handler);
>>> + struct v4l2_pix_format fmt;
>>> + struct vb2_queue *vq;
>>> + unsigned long flags;
>>> +
>>> + spin_lock_irqsave(&ctx->ge2d->ctrl_lock, flags);
>>> + switch (ctrl->id) {
>>> + case V4L2_CID_HFLIP:
>>> + ctx->hflip = ctrl->val;
>>> + break;
>>> + case V4L2_CID_VFLIP:
>>> + ctx->vflip = ctrl->val;
>>> + break;
>>> + case V4L2_CID_ROTATE:
>>> + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE);
>>> + if (vb2_is_busy(vq))
>>> + return -EBUSY;
>>
>> This doesn't call spin_unlock_irqrestore()!
>>
>> Do you need the spinlock at all? This function is already called with a mutex
>> for ctrl->handler held. It's unusual to see a spinlock here.
>
> Is device_run also called with ctrl->handler held ?
>
> The spinlock is used to protect against concurrent re-config & run.
Ah, I see. I think it would help to add some more comments.
BTW, do you need to save the irq state? This function definitely can't
be called from interrupt context, and I suspect that's also true of the
other place where this spinlock is used.
>
> [...]
>
>>> +
>>> + platform_set_drvdata(pdev, ge2d);
>>> + ge2d->m2m_dev = v4l2_m2m_init(&ge2d_m2m_ops);
>>> + if (IS_ERR(ge2d->m2m_dev)) {
>>> + v4l2_err(&ge2d->v4l2_dev, "Failed to init mem2mem device\n");
>>> + ret = PTR_ERR(ge2d->m2m_dev);
>>> + goto unreg_video_dev;
>>
>> This should be goto rel_vdev.
>>
>>> + }
>>> +
>>> + ret = video_register_device(vfd, VFL_TYPE_VIDEO, -1);
>>> + if (ret) {
>>> + v4l2_err(&ge2d->v4l2_dev, "Failed to register video device\n");
>>> + goto rel_vdev;
>>> + }
>>> +
>>> + v4l2_info(&ge2d->v4l2_dev, "Registered %s as /dev/%s\n",
>>> + vfd->name, video_device_node_name(vfd));
>>> +
>>> + return 0;
>>> +
>>> +rel_vdev:
>>> + video_device_release(vfd);
>>> +unreg_video_dev:
>>> + video_unregister_device(ge2d->vfd);
>>
>> This makes no sense. If video_register_device() fails, then you
>> call video_device_release(vfd), not video_unregister_device().
>>
>> Just drop these two lines.
>
> ok
>
>>
>>> +unreg_v4l2_dev:
>>> + v4l2_device_unregister(&ge2d->v4l2_dev);
>>> +disable_clks:
>>> + clk_disable_unprepare(ge2d->clk);
>>> +
>>> + return ret;
>>> +}
>>> +
>>> +static int ge2d_remove(struct platform_device *pdev)
>>> +{
>>> + struct meson_ge2d *ge2d = platform_get_drvdata(pdev);
>>> +
>>> + v4l2_m2m_release(ge2d->m2m_dev);
>>> + video_unregister_device(ge2d->vfd);
>>> + v4l2_device_unregister(&ge2d->v4l2_dev);
>>> +
>>> + clk_disable_unprepare(ge2d->clk);
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static const struct of_device_id meson_ge2d_match[] = {
>>> + {
>>> + .compatible = "amlogic,axg-ge2d",
>>> + },
>>> + {},
>>> +};
>>> +
>>> +MODULE_DEVICE_TABLE(of, meson_ge2d_match);
>>> +
>>> +static struct platform_driver ge2d_drv = {
>>> + .probe = ge2d_probe,
>>> + .remove = ge2d_remove,
>>> + .driver = {
>>> + .name = "meson-ge2d",
>>> + .of_match_table = meson_ge2d_match,
>>> + },
>>> +};
>>> +
>>> +module_platform_driver(ge2d_drv);
>>> +
>>> +MODULE_AUTHOR("Neil Armstrong <narmstrong@...libre.com>");
>>> +MODULE_DESCRIPTION("Amlogic 2D Graphic Acceleration Unit");
>>> +MODULE_LICENSE("GPL");
>>>
>>
>> Regards,
>>
>> Hans
>>
>
> Thanks,
> Neil
>
Regards,
Hans
Powered by blists - more mailing lists