| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201203192439.16177-10-digetx@gmail.com>
Date: Thu, 3 Dec 2020 22:24:38 +0300
From: Dmitry Osipenko <digetx@...il.com>
To: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Georgi Djakov <georgi.djakov@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Peter De Schrijver <pdeschrijver@...dia.com>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Kyungmin Park <kyungmin.park@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Mikko Perttunen <cyndis@...si.fi>,
Viresh Kumar <vireshk@...nel.org>,
Peter Geis <pgwipeout@...il.com>,
Nicolas Chauvet <kwizart@...il.com>,
Krzysztof Kozlowski <krzk@...nel.org>
Cc: linux-tegra@...r.kernel.org, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org
Subject: [PATCH v11 09/10] PM / devfreq: tegra30: Support interconnect and OPPs from device-tree
This patch moves ACTMON driver away from generating OPP table by itself,
transitioning it to use the table which comes from device-tree. This
change breaks compatibility with older device-trees and brings support
for the interconnect framework to the driver. This is a mandatory change
which needs to be done in order to implement interconnect-based memory
DVFS, i.e. device-trees need to be updated. Now ACTMON issues a memory
bandwidth requests using dev_pm_opp_set_bw() instead of driving EMC clock
rate directly.
Tested-by: Peter Geis <pgwipeout@...il.com>
Tested-by: Nicolas Chauvet <kwizart@...il.com>
Acked-by: Chanwoo Choi <cw00.choi@...sung.com>
Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
drivers/devfreq/tegra30-devfreq.c | 79 +++++++++++++++----------------
1 file changed, 37 insertions(+), 42 deletions(-)
diff --git a/drivers/devfreq/tegra30-devfreq.c b/drivers/devfreq/tegra30-devfreq.c
index 38cc0d014738..145ef91ae092 100644
--- a/drivers/devfreq/tegra30-devfreq.c
+++ b/drivers/devfreq/tegra30-devfreq.c
@@ -19,6 +19,8 @@
#include <linux/reset.h>
#include <linux/workqueue.h>
+#include <soc/tegra/fuse.h>
+
#include "governor.h"
#define ACTMON_GLB_STATUS 0x0
@@ -155,6 +157,7 @@ struct tegra_devfreq_device {
struct tegra_devfreq {
struct devfreq *devfreq;
+ struct opp_table *opp_table;
struct reset_control *reset;
struct clk *clock;
@@ -612,34 +615,19 @@ static void tegra_actmon_stop(struct tegra_devfreq *tegra)
static int tegra_devfreq_target(struct device *dev, unsigned long *freq,
u32 flags)
{
- struct tegra_devfreq *tegra = dev_get_drvdata(dev);
- struct devfreq *devfreq = tegra->devfreq;
struct dev_pm_opp *opp;
- unsigned long rate;
- int err;
+ int ret;
opp = devfreq_recommended_opp(dev, freq, flags);
if (IS_ERR(opp)) {
dev_err(dev, "Failed to find opp for %lu Hz\n", *freq);
return PTR_ERR(opp);
}
- rate = dev_pm_opp_get_freq(opp);
- dev_pm_opp_put(opp);
-
- err = clk_set_min_rate(tegra->emc_clock, rate * KHZ);
- if (err)
- return err;
-
- err = clk_set_rate(tegra->emc_clock, 0);
- if (err)
- goto restore_min_rate;
- return 0;
-
-restore_min_rate:
- clk_set_min_rate(tegra->emc_clock, devfreq->previous_freq);
+ ret = dev_pm_opp_set_bw(dev, opp);
+ dev_pm_opp_put(opp);
- return err;
+ return ret;
}
static int tegra_devfreq_get_dev_status(struct device *dev,
@@ -655,7 +643,7 @@ static int tegra_devfreq_get_dev_status(struct device *dev,
stat->private_data = tegra;
/* The below are to be used by the other governors */
- stat->current_frequency = cur_freq;
+ stat->current_frequency = cur_freq * KHZ;
actmon_dev = &tegra->devices[MCALL];
@@ -705,7 +693,12 @@ static int tegra_governor_get_target(struct devfreq *devfreq,
target_freq = max(target_freq, dev->target_freq);
}
- *freq = target_freq;
+ /*
+ * tegra-devfreq driver operates with KHz units, while OPP table
+ * entries use Hz units. Hence we need to convert the units for the
+ * devfreq core.
+ */
+ *freq = target_freq * KHZ;
return 0;
}
@@ -774,6 +767,7 @@ static struct devfreq_governor tegra_devfreq_governor = {
static int tegra_devfreq_probe(struct platform_device *pdev)
{
+ u32 hw_version = BIT(tegra_sku_info.soc_speedo_id);
struct tegra_devfreq_device *dev;
struct tegra_devfreq *tegra;
struct devfreq *devfreq;
@@ -822,11 +816,25 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
return err;
}
+ tegra->opp_table = dev_pm_opp_set_supported_hw(&pdev->dev,
+ &hw_version, 1);
+ err = PTR_ERR_OR_ZERO(tegra->opp_table);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to set supported HW: %d\n", err);
+ return err;
+ }
+
+ err = dev_pm_opp_of_add_table(&pdev->dev);
+ if (err) {
+ dev_err(&pdev->dev, "Failed to add OPP table: %d\n", err);
+ goto put_hw;
+ }
+
err = clk_prepare_enable(tegra->clock);
if (err) {
dev_err(&pdev->dev,
"Failed to prepare and enable ACTMON clock\n");
- return err;
+ goto remove_table;
}
err = reset_control_reset(tegra->reset);
@@ -850,23 +858,6 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
dev->regs = tegra->regs + dev->config->offset;
}
- for (rate = 0; rate <= tegra->max_freq * KHZ; rate++) {
- rate = clk_round_rate(tegra->emc_clock, rate);
-
- if (rate < 0) {
- dev_err(&pdev->dev,
- "Failed to round clock rate: %ld\n", rate);
- err = rate;
- goto remove_opps;
- }
-
- err = dev_pm_opp_add(&pdev->dev, rate / KHZ, 0);
- if (err) {
- dev_err(&pdev->dev, "Failed to add OPP: %d\n", err);
- goto remove_opps;
- }
- }
-
platform_set_drvdata(pdev, tegra);
tegra->clk_rate_change_nb.notifier_call = tegra_actmon_clk_notify_cb;
@@ -882,7 +873,6 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
}
tegra_devfreq_profile.initial_freq = clk_get_rate(tegra->emc_clock);
- tegra_devfreq_profile.initial_freq /= KHZ;
devfreq = devfreq_add_device(&pdev->dev, &tegra_devfreq_profile,
"tegra_actmon", NULL);
@@ -902,6 +892,10 @@ static int tegra_devfreq_probe(struct platform_device *pdev)
reset_control_reset(tegra->reset);
disable_clk:
clk_disable_unprepare(tegra->clock);
+remove_table:
+ dev_pm_opp_of_remove_table(&pdev->dev);
+put_hw:
+ dev_pm_opp_put_supported_hw(tegra->opp_table);
return err;
}
@@ -913,11 +907,12 @@ static int tegra_devfreq_remove(struct platform_device *pdev)
devfreq_remove_device(tegra->devfreq);
devfreq_remove_governor(&tegra_devfreq_governor);
- dev_pm_opp_remove_all_dynamic(&pdev->dev);
-
reset_control_reset(tegra->reset);
clk_disable_unprepare(tegra->clock);
+ dev_pm_opp_of_remove_table(&pdev->dev);
+ dev_pm_opp_put_supported_hw(tegra->opp_table);
+
return 0;
}
--
2.29.2
Powered by blists - more mailing lists