| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <160707931985.3296595.4852247459424743502.stgit@devnote2>
Date: Fri, 4 Dec 2020 19:55:20 +0900
From: Masami Hiramatsu <mhiramat@...nel.org>
To: x86@...nel.org, Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...nel.org>, Borislav Petkov <bp@...en8.de>
Cc: Kees Cook <keescook@...omium.org>,
Masami Hiramatsu <mhiramat@...nel.org>,
"H . Peter Anvin" <hpa@...or.com>, Joerg Roedel <jroedel@...e.de>,
Tom Lendacky <thomas.lendacky@....com>,
"Gustavo A . R . Silva" <gustavoars@...nel.org>,
Jann Horn <jannh@...gle.com>,
Srikar Dronamraju <srikar@...ux.vnet.ibm.com>,
Ricardo Neri <ricardo.neri-calderon@...ux.intel.com>,
linux-kernel@...r.kernel.org
Subject: [PATCH v3 1/3] x86/uprobes: Fix not using prefixes.nbytes for loop over prefixes.bytes
Since the insn.prefixes.nbytes can be bigger than the size of
insn.prefixes.bytes[] when a same prefix is repeated, we have to
check whether the insn.prefixes.bytes[i] != 0 and i < 4(*) instead
of insn.prefixes.nbytes.
(*) 4 is the number of maximum legacy prefix groups on one instruction.
This introduces for_each_insn_prefix() macro for this purpose.
Fixes: 2b1444983508 ("uprobes, mm, x86: Add the ability to install and remove uprobes breakpoints")
Reported-by: syzbot+9b64b619f10f19d19a7c@...kaller.appspotmail.com
Debugged-by: Kees Cook <keescook@...omium.org>
Reviewed-by: Srikar Dronamraju <srikar@...ux.vnet.ibm.com>
Signed-off-by: Masami Hiramatsu <mhiramat@...nel.org>
Cc: stable@...r.kernel.org
---
Changes in v3:
- Add NUM_INSN_FIELD_BYTES and MAX_LEGACY_PREFIX_GROUPS macros
and comments on it.
Changes in v2:
- Add for_each_insn_prefix() macro and fix to check index first.
---
arch/x86/include/asm/insn.h | 49 ++++++++++++++++++++++++++++++++++++-
arch/x86/kernel/uprobes.c | 10 +++++---
arch/x86/lib/insn.c | 2 +-
tools/arch/x86/include/asm/insn.h | 49 ++++++++++++++++++++++++++++++++++++-
tools/arch/x86/lib/insn.c | 2 +-
5 files changed, 104 insertions(+), 8 deletions(-)
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 5c1ae3eff9d4..516d9d03027c 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -10,10 +10,13 @@
/* insn_attr_t is defined in inat.h */
#include <asm/inat.h>
+/* This must be sizeof(insn_value_t) / sizeof(insn_byte_t) */
+#define NUM_INSN_FIELD_BYTES 4
+
struct insn_field {
union {
insn_value_t value;
- insn_byte_t bytes[4];
+ insn_byte_t bytes[NUM_INSN_FIELD_BYTES];
};
/* !0 if we've run insn_get_xxx() for this field */
unsigned char got;
@@ -58,6 +61,32 @@ struct insn {
};
#define MAX_INSN_SIZE 15
+/*
+ * Intel SDM Vol.2 2.1.1 states,
+ * Instruction prefixes are divided into four groups, each with a set of
+ * allowable prefix codes. For each instruction, it only useful to include
+ * up to one prefix code from each of the four groups (Groups 1, 2, 3, 4).
+ *
+ * Also, AMD APM Vol.3 1.2.1 states,
+ * The legacy prefixes are organized into five groups, ... An instruction
+ * encoding may include a maximum of one prefix from each of the five groups.
+ *
+ * However, AMD APM classifies REP* and LOCK prefix in different groups,
+ * but those prefixes are supported by different instructions. Thus,
+ * there is no chance to co-exist them on the same instruction.
+ *
+ * So it can be expected that there is 4 groups of legacy prefixes in
+ * maximum on one instruction.
+ */
+#define MAX_LEGACY_PREFIX_GROUPS 4
+
+/*
+ * Make sure the number of max legacy prefix groups does not exceed the
+ * size of insn.prefixes.bytes[].
+ */
+#if MAX_LEGACY_PREFIX_GROUPS > NUM_INSN_FIELD_BYTES
+ #error "Error: Max number of prefix groups exceeds the prefix field size"
+#endif
#define X86_MODRM_MOD(modrm) (((modrm) & 0xc0) >> 6)
#define X86_MODRM_REG(modrm) (((modrm) & 0x38) >> 3)
@@ -201,6 +230,24 @@ static inline int insn_offset_immediate(struct insn *insn)
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx: Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than NUM_INSN_FIELD_BYTES when some
+ * prefixes are repeated, it can not be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix) \
+ for (idx = 0; \
+ idx < MAX_LEGACY_PREFIX_GROUPS && \
+ (prefix = insn->prefixes.bytes[idx]) != 0; \
+ idx++)
+
#define POP_SS_OPCODE 0x1f
#define MOV_SREG_OPCODE 0x8e
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 3fdaa042823d..138bdb1fd136 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -255,12 +255,13 @@ static volatile u32 good_2byte_insns[256 / 32] = {
static bool is_prefix_bad(struct insn *insn)
{
+ insn_byte_t p;
int i;
- for (i = 0; i < insn->prefixes.nbytes; i++) {
+ for_each_insn_prefix(insn, i, p) {
insn_attr_t attr;
- attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
+ attr = inat_get_opcode_attribute(p);
switch (attr) {
case INAT_MAKE_PREFIX(INAT_PFX_ES):
case INAT_MAKE_PREFIX(INAT_PFX_CS):
@@ -715,6 +716,7 @@ static const struct uprobe_xol_ops push_xol_ops = {
static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
{
u8 opc1 = OPCODE1(insn);
+ insn_byte_t p;
int i;
switch (opc1) {
@@ -746,8 +748,8 @@ static int branch_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
* Intel and AMD behavior differ in 64-bit mode: Intel ignores 66 prefix.
* No one uses these insns, reject any branch insns with such prefix.
*/
- for (i = 0; i < insn->prefixes.nbytes; i++) {
- if (insn->prefixes.bytes[i] == 0x66)
+ for_each_insn_prefix(insn, i, p) {
+ if (p == 0x66)
return -ENOTSUPP;
}
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 404279563891..c68c2a0c82d8 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -119,7 +119,7 @@ void insn_get_prefixes(struct insn *insn)
for (i = 0; i < nb; i++)
if (prefixes->bytes[i] == b)
goto found;
- if (nb == 4)
+ if (nb == MAX_LEGACY_PREFIX_GROUPS)
/* Invalid instruction */
break;
prefixes->bytes[nb++] = b;
diff --git a/tools/arch/x86/include/asm/insn.h b/tools/arch/x86/include/asm/insn.h
index 568854b14d0a..c968c8f30915 100644
--- a/tools/arch/x86/include/asm/insn.h
+++ b/tools/arch/x86/include/asm/insn.h
@@ -10,10 +10,13 @@
/* insn_attr_t is defined in inat.h */
#include "inat.h"
+/* This must be sizeof(insn_value_t) / sizeof(insn_byte_t) */
+#define NUM_INSN_FIELD_BYTES 4
+
struct insn_field {
union {
insn_value_t value;
- insn_byte_t bytes[4];
+ insn_byte_t bytes[NUM_INSN_FIELD_BYTES];
};
/* !0 if we've run insn_get_xxx() for this field */
unsigned char got;
@@ -58,6 +61,32 @@ struct insn {
};
#define MAX_INSN_SIZE 15
+/*
+ * Intel SDM Vol.2 2.1.1 states,
+ * Instruction prefixes are divided into four groups, each with a set of
+ * allowable prefix codes. For each instruction, it only useful to include
+ * up to one prefix code from each of the four groups (Groups 1, 2, 3, 4).
+ *
+ * Also, AMD APM Vol.3 1.2.1 states,
+ * The legacy prefixes are organized into five groups, ... An instruction
+ * encoding may include a maximum of one prefix from each of the five groups.
+ *
+ * However, AMD APM classifies REP* and LOCK prefix in different groups,
+ * but those prefixes are supported by different instructions. Thus,
+ * there is no chance to co-exist them on the same instruction.
+ *
+ * So it can be expected that there is 4 groups of legacy prefixes in
+ * maximum on one instruction.
+ */
+#define MAX_LEGACY_PREFIX_GROUPS 4
+
+/*
+ * Make sure the number of max legacy prefix groups does not exceed the
+ * size of insn.prefixes.bytes[].
+ */
+#if MAX_LEGACY_PREFIX_GROUPS > NUM_INSN_FIELD_BYTES
+ #error "Error: Max number of prefix groups exceeds the prefix field size"
+#endif
#define X86_MODRM_MOD(modrm) (((modrm) & 0xc0) >> 6)
#define X86_MODRM_REG(modrm) (((modrm) & 0x38) >> 3)
@@ -201,6 +230,24 @@ static inline int insn_offset_immediate(struct insn *insn)
return insn_offset_displacement(insn) + insn->displacement.nbytes;
}
+/**
+ * for_each_insn_prefix() -- Iterate prefixes in the instruction
+ * @insn: Pointer to struct insn.
+ * @idx: Index storage.
+ * @prefix: Prefix byte.
+ *
+ * Iterate prefix bytes of given @insn. Each prefix byte is stored in @prefix
+ * and the index is stored in @idx (note that this @idx is just for a cursor,
+ * do not change it.)
+ * Since prefixes.nbytes can be bigger than NUM_INSN_FIELD_BYTES when some
+ * prefixes are repeated, it can not be used for looping over the prefixes.
+ */
+#define for_each_insn_prefix(insn, idx, prefix) \
+ for (idx = 0; \
+ idx < MAX_LEGACY_PREFIX_GROUPS && \
+ (prefix = insn->prefixes.bytes[idx]) != 0; \
+ idx++)
+
#define POP_SS_OPCODE 0x1f
#define MOV_SREG_OPCODE 0x8e
diff --git a/tools/arch/x86/lib/insn.c b/tools/arch/x86/lib/insn.c
index 0151dfc6da61..2f2def4f2ee7 100644
--- a/tools/arch/x86/lib/insn.c
+++ b/tools/arch/x86/lib/insn.c
@@ -119,7 +119,7 @@ void insn_get_prefixes(struct insn *insn)
for (i = 0; i < nb; i++)
if (prefixes->bytes[i] == b)
goto found;
- if (nb == 4)
+ if (nb == MAX_LEGACY_PREFIX_GROUPS)
/* Invalid instruction */
break;
prefixes->bytes[nb++] = b;
Powered by blists - more mailing lists