Message-ID: <20201203201828.GB78704@fuller.cnet>
Date:   Thu, 3 Dec 2020 17:18:28 -0300
From:   Marcelo Tosatti <mtosatti@...hat.com>
To:     Maxim Levitsky <mlevitsk@...hat.com>
Cc:     kvm@...r.kernel.org, Paolo Bonzini <pbonzini@...hat.com>,
        Oliver Upton <oupton@...gle.com>,
        Ingo Molnar <mingo@...hat.com>,
        Sean Christopherson <sean.j.christopherson@...el.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        open list <linux-kernel@...r.kernel.org>,
        Jonathan Corbet <corbet@....net>,
        Wanpeng Li <wanpengli@...cent.com>,
        Borislav Petkov <bp@...en8.de>,
        Jim Mattson <jmattson@...gle.com>,
        "H. Peter Anvin" <hpa@...or.com>,
        "open list:DOCUMENTATION" <linux-doc@...r.kernel.org>,
        Joerg Roedel <joro@...tes.org>,
        "maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)" <x86@...nel.org>,
        Vitaly Kuznetsov <vkuznets@...hat.com>
Subject: Re: [PATCH 0/2] RFC: Precise TSC migration


On Thu, Dec 03, 2020 at 01:39:42PM +0200, Maxim Levitsky wrote:
> On Tue, 2020-12-01 at 16:48 -0300, Marcelo Tosatti wrote:
> > On Tue, Dec 01, 2020 at 02:30:39PM +0200, Maxim Levitsky wrote:
> > > On Mon, 2020-11-30 at 16:16 -0300, Marcelo Tosatti wrote:
> > > > Hi Maxim,
> > > > 
> > > > On Mon, Nov 30, 2020 at 03:35:57PM +0200, Maxim Levitsky wrote:
> > > > > Hi!
> > > > > 
> > > > > This is the first version of the work to make TSC migration more accurate,
> > > > > as was defined by Paulo at:
> > > > > https://www.spinics.net/lists/kvm/msg225525.html
> > > > 
> > > > Description from Oliver's patch:
> > > > 
> > > > "To date, VMMs have typically restored the guest's TSCs by value using
> > > > the KVM_SET_MSRS ioctl for each vCPU. However, restoring the TSCs by
> > > > value introduces some challenges with synchronization as the TSCs
> > > > continue to tick throughout the restoration process. As such, KVM has
> > > > some heuristics around TSC writes to infer whether or not the guest or
> > > > host is attempting to synchronize the TSCs."
> > > > 
> > > > Not really. The synchronization logic tries to sync TSCs during
> > > > BIOS boot (and CPU hotplug), because the TSC values are loaded
> > > > sequentially, say:
> > > > 
> > > > CPU		realtime	TSC val
> > > > vcpu0		0 usec		0
> > > > vcpu1		100 usec	0
> > > > vcpu2		200 usec	0
> > > > ...
> > > > 
> > > > And we'd like to see all vcpus to read the same value at all times.
> > > > 
> > > > Other than that, comment makes sense. The problem with live migration
> > > > is as follows:
> > > > 
> > > > We'd like the TSC value to be written, ideally, just before the first
> > > > VM-entry a vCPU (because at the moment the TSC_OFFSET has been written, 
> > > > the vcpus tsc is ticking, which will cause a visible forward jump
> > > > in vcpus tsc time).
> > > > 
> > > > Before the first VM-entry is the farthest point in time before guest
> > > > entry that one could do that.
> > > > 
> > > > The window (or forward jump) between KVM_SET_TSC and VM-entry was about
> > > > 100ms last time i checked (which results in a 100ms time jump forward), 
> > > > See QEMU's 6053a86fe7bd3d5b07b49dae6c05f2cd0d44e687.
> > > > 
> > > > Have we measured any improvement with this patchset?
> > > 
> > > Its not about this window. 
> > > It is about time that passes between the point that we read the 
> > > TSC on source system (and we do it in qemu each time the VM is paused) 
> > > and the moment that we set the same TSC value on the target. 
> > > That time is unbounded.
> > 
> > OK. Well, its the same problem: ideally you'd want to do that just
> > before VCPU-entry.
> > 
> > > Also this patchset should decrease TSC skew that happens
> > > between restoring it on multiple vCPUs as well, since 
> > > KVM_SET_TSC_STATE doesn't have to happen at the same time,
> > > as it accounts for time passed on each vCPU.
> > > 
> > > 
> > > Speaking of kvmclock, somewhat offtopic since this is a different issue,
> > > I found out that qemu reads the kvmclock value on each pause, 
> > > and then 'restores' on unpause, using
> > > KVM_SET_CLOCK (this modifies the global kvmclock offset)
> > > 
> > > This means (and I tested it) that if guest uses kvmclock
> > > for time reference, it will not account for time passed in
> > > the paused state.
> > 
> > Yes, this is necessary because otherwise there might be an overflow
> > in the kernel time accounting code (if the clock delta is too large).
> 
> Could you elaborate on this? Do you mean that guest kernel can crash,
> when the time 'jumps' too far forward in one go?

It can crash (there will a overflow and time will jump backwards).

> If so this will happen with kernel using TSC as well, 
> since we do let the virtual TSC to 'keep running' while VM is suspended, 
> and the goal of this patchset is to let it 'run' even while
> the VM is migrating.

True. For the overflow one, perhaps TSC can be stopped (and restored) similarly to
KVMCLOCK.

See QEMU's commit 00f4d64ee76e873be881a82d893a591487aa7950.

> And if there is an issue, we really should try to fix it in
> the guest kernel IMHO.
> 
> > 
> > > > Then Paolo mentions (with >), i am replying as usual.
> > > > 
> > > > > Ok, after looking more at the code with Maxim I can confidently say that
> > > > > it's a total mess.  And a lot of the synchronization code is dead
> > > > > because 1) as far as we could see no guest synchronizes the TSC using
> > > > > MSR_IA32_TSC; 
> > > > 
> > > > Well, recent BIOS'es take care of synchronizing the TSC. So when Linux
> > > > boots, it does not have to synchronize TSC in software. 
> > > 
> > > Do you have an example of such BIOS? I tested OVMF which I compiled
> > > from git master a few weeks ago, and I also tested this with seabios 
> > > from qemu repo, and I have never seen writes to either TSC, or TSC_ADJUST
> > > from BIOS.
> > 
> > Oh, well, QEMU then.
> > 
> > > Or do you refer to the native BIOS on the host doing TSC synchronization?
> > 
> > No, virt.
> 
> I also (lightly) tested win10 guest, and win10 guest with Hyper-V enabled,
> and in both cases I haven't observed TSC/TSC_ADJUST writes.
> 
> > 
> > > > However, upon migration (and initialization), the KVM_SET_TSC's do 
> > > > not happen at exactly the same time (the MSRs for each vCPU are loaded
> > > > in sequence). The synchronization code in kvm_set_tsc() is for those cases.
> > > 
> > > I agree with that, and this is one of the issues that KVM_SET_TSC_STATE
> > > is going to fix, since it accounts for it.
> > > 
> > > 
> > > > > and 2) writing to MSR_IA32_TSC_ADJUST does not trigger the
> > > > > synchronization code in kvm_write_tsc.
> > > > 
> > > > Not familiar how guests are using MSR_IA32_TSC_ADJUST (or Linux)...
> > > > Lets see:
> > > > 
> > > > 
> > > > /*
> > > >  * Freshly booted CPUs call into this:
> > > >  */
> > > > void check_tsc_sync_target(void)
> > > > {
> > > >         struct tsc_adjust *cur = this_cpu_ptr(&tsc_adjust);
> > > >         unsigned int cpu = smp_processor_id();
> > > >         cycles_t cur_max_warp, gbl_max_warp;
> > > >         int cpus = 2;
> > > > 
> > > >         /* Also aborts if there is no TSC. */
> > > >         if (unsynchronized_tsc())
> > > >                 return;
> > > > 
> > > >         /*
> > > >          * Store, verify and sanitize the TSC adjust register. If
> > > >          * successful skip the test.
> > > >          *
> > > >          * The test is also skipped when the TSC is marked reliable. This
> > > >          * is true for SoCs which have no fallback clocksource. On these
> > > >          * SoCs the TSC is frequency synchronized, but still the TSC ADJUST
> > > >          * register might have been wreckaged by the BIOS..
> > > >          */
> > > >         if (tsc_store_and_check_tsc_adjust(false) || tsc_clocksource_reliable) {
> > > >                 atomic_inc(&skip_test);
> > > >                 return;
> > > >         }
> > > > 
> > > > retry:
> > > > 
> > > > I'd force that synchronization path to be taken as a test-case.
> > > 
> > > Or even better as I suggested, we might tell the guest kernel
> > > to avoid this synchronization path when KVM is detected
> > > (regardless of invtsc flag)
> > > 
> > > > 
> > > > > I have a few thoughts about the kvm masterclock synchronization,
> > > > > which relate to the Paulo's proposal that I implemented.
> > > > > 
> > > > > The idea of masterclock is that when the host TSC is synchronized
> > > > > (or as kernel call it, stable), and the guest TSC is synchronized as well,
> > > > > then we can base the kvmclock, on the same pair of
> > > > > (host time in nsec, host tsc value), for all vCPUs.
> > > > 
> > > > We _have_ to base. See the comment which starts with
> > > > 
> > > > "Assuming a stable TSC across physical CPUS, and a stable TSC"
> > > > 
> > > > at x86.c.
> > > > 
> > > > > This makes the random error in calculation of this value invariant
> > > > > across vCPUS, and allows the guest to do kvmclock calculation in userspace
> > > > > (vDSO) since kvmclock parameters are vCPU invariant.
> > > > 
> > > > Actually, without synchronized host TSCs (and the masterclock scheme,
> > > > with a single base read from a vCPU), kvmclock in kernel is buggy as
> > > > well:
> > > > 
> > > > u64 pvclock_clocksource_read(struct pvclock_vcpu_time_info *src)
> > > > {
> > > >         unsigned version;
> > > >         u64 ret;
> > > >         u64 last;
> > > >         u8 flags;
> > > > 
> > > >         do {
> > > >                 version = pvclock_read_begin(src);
> > > >                 ret = __pvclock_read_cycles(src, rdtsc_ordered());
> > > >                 flags = src->flags;
> > > >         } while (pvclock_read_retry(src, version));
> > > > 
> > > >         if (unlikely((flags & PVCLOCK_GUEST_STOPPED) != 0)) {
> > > >                 src->flags &= ~PVCLOCK_GUEST_STOPPED;
> > > >                 pvclock_touch_watchdogs();
> > > >         }
> > > > 
> > > >         if ((valid_flags & PVCLOCK_TSC_STABLE_BIT) &&
> > > >                 (flags & PVCLOCK_TSC_STABLE_BIT))
> > > >                 return ret;
> > > > 
> > > > The code that follows this (including cmpxchg) is a workaround for that 
> > > > bug.
> > > 
> > > I understand that. I am not arguing that we shoudn't use the masterclock!
> > > I am just saying the facts about the condition when it works.
> > 
> > Sure.
> > 
> > > > Workaround would require each vCPU to write to a "global clock", on
> > > > every clock read.
> > > > 
> > > > > To ensure that the guest tsc is synchronized we currently track host/guest tsc
> > > > > writes, and enable the master clock only when roughly the same guest's TSC value
> > > > > was written across all vCPUs.
> > > > 
> > > > Yes, because then you can do:
> > > > 
> > > > vcpu0				vcpu1
> > > > 
> > > > A = read TSC
> > > > 		... elapsed time ...
> > > > 
> > > > 				B = read TSC
> > > > 
> > > > 				delta = B - A
> > > > 
> > > > > Recently this was disabled by Paulo
> > > > 
> > > > What was disabled exactly?
> > > 
> > > The running of tsc synchronization code when the _guest_ writes the TSC.
> > > 
> > > Which changes two things:
> > >    1. If the guest de-synchronizes its TSC, we won't disable master clock.
> > >    2. If the guest writes similar TSC values on each vCPU we won't detect
> > >       this as synchronization attempt, replace this with exactly the same
> > >       value and finally re-enable the master clock.
> > > 
> > > I argue that this change is OK, because Linux guests don't write to TSC at all,
> > > the virtual BIOSes seems not to write there either, and the only case in which
> > > the Linux guest tries to change its TSC is on CPU hotplug as you mention and 
> > > it uses TSC_ADJUST, that currently doesn't trigger TSC synchronization code in
> > > KVM anyway, so it is broken already.
> > > 
> > > However I also argue that we should mention this in documentation just in case,
> > > and we might also want (also just in case) to make Linux guests avoid even trying to
> > > touch TSC_ADJUST register when running under KVM.
> > > 
> > > To rehash my own words, the KVM_CLOCK_TSC_STABLE should be defined as:
> > > 'kvmclock is vCPU invariant, as long as the guest doesn't mess with its TSC'.
> > > 
> > > Having said all that, now that I know tsc sync code, and the
> > > reasons why it is there, I wouldn't be arguing about putting it back either.
> > 
> > Agree.
> > 
> > > > > and I agree with this, because I think
> > > > > that we indeed should only make the guest TSC synchronized by default
> > > > > (including new hotplugged vCPUs) and not do any tsc synchronization beyond that.
> > > > > (Trying to guess when the guest syncs the TSC can cause more harm that good).
> > > > > 
> > > > > Besides, Linux guests don't sync the TSC via IA32_TSC write,
> > > > > but rather use IA32_TSC_ADJUST which currently doesn't participate
> > > > > in the tsc sync heruistics.
> > > > 
> > > > Linux should not try to sync the TSC with IA32_TSC_ADJUST. It expects
> > > > the BIOS to boot with synced TSCs.
> > > > 
> > > > So i wonder what is making it attempt TSC sync in the first place?
> > > 
> > > CPU hotplug. And the guest doesn't really write to TSC_ADJUST 
> > > since it's measurement code doesn't detect any tsc warps. 
> > >  
> > > I was just thinking that in theory since, this is a VM, and it can be 
> > > interrupted at any point, the measurement code should sometimes fall,
> > > and cause trouble.
> > > I didn't do much homework on this so I might be overreacting.
> > 
> > That is true (and you can see it with a CPU starved guest).
> > 
> > > As far as I see X86_FEATURE_TSC_RELIABLE was done mostly to support
> > > running under Hyper-V and VMWARE, and these should be prone to similar
> > > issues, supporting my theory.
> > > 
> > > > (one might also want to have Linux's synchronization via IA32_TSC_ADJUST 
> > > > working, but it should not need to happen in the first place, as long as 
> > > > QEMU and KVM are behaving properly).
> > > > 
> > > > > And as far as I know, Linux guest is the primary (only?) user of the kvmclock.
> > > > 
> > > > Only AFAIK.
> > > > 
> > > > > I *do think* however that we should redefine KVM_CLOCK_TSC_STABLE
> > > > > in the documentation to state that it only guarantees invariance if the guest
> > > > > doesn't mess with its own TSC.
> > > > > 
> > > > > Also I think we should consider enabling the X86_FEATURE_TSC_RELIABLE
> > > > > in the guest kernel, when kvm is detected to avoid the guest even from trying
> > > > > to sync TSC on newly hotplugged vCPUs.
> > > > 
> > > > See 7539b174aef405d9d57db48c58390ba360c91312.
> > > 
> > > I know about this, and I personally always use invtsc
> > > with my VMs.
> > 
> > Well, we can't make it (-cpu xxx,+invtsc) the default if vm-stop/vm-cont are unstable
> > with TSC!
> 
> Could you elaborate on this too? Are you referring to the same issue you 
> had mentioned about the overflow in the kernel time accounting?

Well, any issue that could show up.

> > > > Was hoping to make that (-cpu xxx,+invtsc) the default in QEMU once invariant TSC code
> > > > becomes stable. Should be tested enough by now?
> > > 
> > > The issue is that Qemu blocks migration when invtsc is set, based on the
> > > fact that the target machine might have different TSC frequency and no
> > > support for TSC scaling.
> > > There was a long debate on this long ago.
> > 
> > Oh right.
> > 
> > > It is possible though to override this by specifying the exact frequency
> > > you want the guest TSC to run at, by using something like
> > > (tsc-frequency=3500000000)
> > > I haven't checked if libvirt does this or not.
> > 
> > It does.
> Cool.
> > 
> > > I do think that as long as the user uses modern CPUs (which have stable TSC
> > > and support TSC scaling), there is no reason to disable invtsc, and
> > > therefore no reason to use kvmclock.
> > 
> > Yep. TSC is faster.
> 
> Also this bit is sometimes used by userspace tools.

Yep! SAP HANA as well.

> Some time ago I found out that fio uses it to decide whether 
> to use TSC for measurements.
> 
> I didn't know this and was running fio in a guest without 'invtsc'.
> Fio switched to plain gettimeofday behind my back
> and totally screwed up the results.
> 
> > 
> > > > > (The guest doesn't end up touching TSC_ADJUST usually, but it still might
> > > > > in some cases due to scheduling of guest vCPUs)
> > > > > 
> > > > > (X86_FEATURE_TSC_RELIABLE short circuits tsc synchronization on CPU hotplug,
> > > > > and TSC clocksource watchdog, and the later we might want to keep).
> > > > 
> > > > The latter we want to keep.
> > > > 
> > > > > For host TSC writes, just as Paulo proposed we can still do the tsc sync,
> > > > > unless the new code that I implemented is in use.
> > > > 
> > > > So Paolo's proposal is to
> > > > 
> > > > "- for live migration, userspace is expected to use the new
> > > > KVM_GET/SET_TSC_PRECISE (or whatever the name will be) to get/set a
> > > > (nanosecond, TSC, TSC_ADJUST) tuple."
> > > > 
> > > > Makes sense, so that no time between KVM_SET_TSC and
> > > > MSR_WRITE(TSC_ADJUST) elapses, which would cause the TSC to go out
> > > > of what is desired by the user.
> > > > 
> > > > Since you are proposing this new ioctl, perhaps its useful to also
> > > > reduce the 100ms jump? 
> > > 
> > > Yep. As long as target and destantion clocks are synchronized,
> > > it should make it better.
> > > 
> > > > "- for live migration, userspace is expected to use the new
> > > > KVM_GET/SET_TSC_PRECISE (or whatever the name will be) to get/set a
> > > > (nanosecond, TSC, TSC_ADJUST) tuple. This value will be written
> > > > to the guest before the first VM-entry"
> > > > 
> > > > Sounds like a good idea (to integrate the values in a tuple).
> > > > 
> > > > > Few more random notes:
> > > > > 
> > > > > I have a weird feeling about using 'nsec since 1 January 1970'.
> > > > > Common sense is telling me that a 64 bit value can hold about 580 years,
> > > > > but still I see that it is more common to use timespec which is a (sec,nsec) pair.
> > > > 
> > > >            struct timespec {
> > > >                time_t   tv_sec;        /* seconds */
> > > >                long     tv_nsec;       /* nanoseconds */
> > > >            };
> > > > 
> > > > > I feel that 'kvm_get_walltime' that I added is a bit of a hack.
> > > > > Some refactoring might improve things here.
> > > > 
> > > > Haven't read the patchset yet...
> > > > 
> > > > > For example making kvm_get_walltime_and_clockread work in non tsc case as well
> > > > > might make the code cleaner.
> > > > > 
> > > > > Patches to enable this feature in qemu are in process of being sent to
> > > > > qemu-devel mailing list.
> > > > > 
> > > > > Best regards,
> > > > >        Maxim Levitsky
> > > > > 
> > > > > Maxim Levitsky (2):
> > > > >   KVM: x86: implement KVM_SET_TSC_PRECISE/KVM_GET_TSC_PRECISE
> > > > >   KVM: x86: introduce KVM_X86_QUIRK_TSC_HOST_ACCESS
> > > > > 
> > > > >  Documentation/virt/kvm/api.rst  | 56 +++++++++++++++++++++
> > > > >  arch/x86/include/uapi/asm/kvm.h |  1 +
> > > > >  arch/x86/kvm/x86.c              | 88 +++++++++++++++++++++++++++++++--
> > > > >  include/uapi/linux/kvm.h        | 14 ++++++
> > > > >  4 files changed, 154 insertions(+), 5 deletions(-)
> > > > > 
> > > > > -- 
> > > > > 2.26.2
> > > > > 
> > > 
> > > Best regards,
> > > 	Maxim Levitsky
> > > 
> 
> 
> Best regards,
> 	Maxim Levitsky

Powered by blists - more mailing lists