linux-kernel - Re: [PATCH,v2] mmc: sdhci-pci-gli: Disable slow mode in HS400 mode for GL9763E

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CAPDyKFpCJrHpb0gzDY5Tpg=7YnKpYr80q7m3KaQqBLnNgRPLmw@mail.gmail.com>
Date:   Fri, 4 Dec 2020 15:38:06 +0100
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Ben Chuang <benchuanggli@...il.com>
Cc:     Adrian Hunter <adrian.hunter@...el.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Ben Chuang <ben.chuang@...esyslogic.com.tw>,
        greg.tu@...esyslogic.com.tw
Subject: Re: [PATCH,v2] mmc: sdhci-pci-gli: Disable slow mode in HS400 mode
 for GL9763E

On Wed, 25 Nov 2020 at 12:01, Ben Chuang <benchuanggli@...il.com> wrote:
>
> From: Ben Chuang <ben.chuang@...esyslogic.com.tw>
>
> The GL9763E uses 150Mhz (slow mode) by default in HS400 mode. In order
> to make HS400 mode run at 200Mhz, the slow mode needs to be turned off.
>
> Signed-off-by: Ben Chuang <ben.chuang@...esyslogic.com.tw>

Applied for next, thanks!

Kind regards
Uffe


> ---
>  drivers/mmc/host/sdhci-pci-gli.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-gli.c b/drivers/mmc/host/sdhci-pci-gli.c
> index 9887485a4134..d45d7e529150 100644
> --- a/drivers/mmc/host/sdhci-pci-gli.c
> +++ b/drivers/mmc/host/sdhci-pci-gli.c
> @@ -87,6 +87,9 @@
>  #define PCIE_GLI_9763E_SCR      0x8E0
>  #define   GLI_9763E_SCR_AXI_REQ           BIT(9)
>
> +#define PCIE_GLI_9763E_MMC_CTRL  0x960
> +#define   GLI_9763E_HS400_SLOW     BIT(3)
> +
>  #define SDHCI_GLI_9763E_CQE_BASE_ADDR   0x200
>  #define GLI_9763E_CQE_TRNS_MODE           (SDHCI_TRNS_MULTI | \
>                                     SDHCI_TRNS_BLK_CNT_EN | \
> @@ -764,6 +767,10 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
>         value |= GLI_9763E_SCR_AXI_REQ;
>         pci_write_config_dword(pdev, PCIE_GLI_9763E_SCR, value);
>
> +       pci_read_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, &value);
> +       value &= ~GLI_9763E_HS400_SLOW;
> +       pci_write_config_dword(pdev, PCIE_GLI_9763E_MMC_CTRL, value);
> +
>         pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
>         value &= ~GLI_9763E_VHS_REV;
>         value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
> --
> 2.29.2
>