| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201204154600.1546096-7-almaz.alexandrovich@paragon-software.com>
Date: Fri, 4 Dec 2020 18:45:56 +0300
From: Konstantin Komarov <almaz.alexandrovich@...agon-software.com>
To: <linux-fsdevel@...r.kernel.org>
CC: <viro@...iv.linux.org.uk>, <linux-kernel@...r.kernel.org>,
<pali@...nel.org>, <dsterba@...e.cz>, <aaptel@...e.com>,
<willy@...radead.org>, <rdunlap@...radead.org>, <joe@...ches.com>,
<mark@...mstone.com>, <nborisov@...e.com>,
<linux-ntfs-dev@...ts.sourceforge.net>, <anton@...era.com>,
<dan.carpenter@...cle.com>, <hch@....de>, <ebiggers@...nel.org>,
Konstantin Komarov <almaz.alexandrovich@...agon-software.com>
Subject: [PATCH v14 06/10] fs/ntfs3: Add compression
This adds compression
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@...agon-software.com>
---
fs/ntfs3/lib/common_defs.h | 196 +++++++++++
fs/ntfs3/lib/decompress_common.c | 314 +++++++++++++++++
fs/ntfs3/lib/decompress_common.h | 558 +++++++++++++++++++++++++++++++
fs/ntfs3/lib/lzx_common.c | 204 +++++++++++
fs/ntfs3/lib/lzx_common.h | 31 ++
fs/ntfs3/lib/lzx_constants.h | 113 +++++++
fs/ntfs3/lib/lzx_decompress.c | 553 ++++++++++++++++++++++++++++++
fs/ntfs3/lib/xpress_constants.h | 23 ++
fs/ntfs3/lib/xpress_decompress.c | 165 +++++++++
fs/ntfs3/lznt.c | 452 +++++++++++++++++++++++++
10 files changed, 2609 insertions(+)
create mode 100644 fs/ntfs3/lib/common_defs.h
create mode 100644 fs/ntfs3/lib/decompress_common.c
create mode 100644 fs/ntfs3/lib/decompress_common.h
create mode 100644 fs/ntfs3/lib/lzx_common.c
create mode 100644 fs/ntfs3/lib/lzx_common.h
create mode 100644 fs/ntfs3/lib/lzx_constants.h
create mode 100644 fs/ntfs3/lib/lzx_decompress.c
create mode 100644 fs/ntfs3/lib/xpress_constants.h
create mode 100644 fs/ntfs3/lib/xpress_decompress.c
create mode 100644 fs/ntfs3/lznt.c
diff --git a/fs/ntfs3/lib/common_defs.h b/fs/ntfs3/lib/common_defs.h
new file mode 100644
index 000000000000..2114e37872fb
--- /dev/null
+++ b/fs/ntfs3/lib/common_defs.h
@@ -0,0 +1,196 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2012-2016 Eric Biggers
+ *
+ * Adapted for linux kernel by Alexander Mamaev:
+ * - remove implementations of get_unaligned_
+ * - remove SSE and AVX instructions
+ * - assume GCC is always defined
+ * - inlined aligned_malloc/aligned_free
+ * - ISO C90
+ * - linux kernel code style
+ */
+
+#ifndef _COMMON_DEFS_H
+#define _COMMON_DEFS_H
+
+#include <linux/string.h>
+#include <linux/compiler.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+
+/* ========================================================================== */
+/* Type definitions */
+/* ========================================================================== */
+
+/*
+ * Type of a machine word. 'u32 long' would be logical, but that is only
+ * 32 bits on x86_64 Windows. The same applies to 'uint_fast32_t'. So the best
+ * we can do without a bunch of #ifdefs appears to be 'size_t'.
+ */
+
+#define WORDBYTES sizeof(size_t)
+#define WORDBITS (8 * WORDBYTES)
+
+/* ========================================================================== */
+/* Compiler-specific definitions */
+/* ========================================================================== */
+
+# define forceinline __always_inline
+# define _aligned_attribute(n) __aligned(n)
+# define bsr32(n) (31 - __builtin_clz(n))
+# define bsr64(n) (63 - __builtin_clzll(n))
+# define bsf32(n) __builtin_ctz(n)
+# define bsf64(n) __builtin_ctzll(n)
+
+/* STATIC_ASSERT() - verify the truth of an expression at compilation time */
+#define STATIC_ASSERT(expr) ((void)sizeof(char[1 - 2 * !(expr)]))
+
+/* STATIC_ASSERT_ZERO() - verify the truth of an expression at compilation time
+ * and also produce a result of value '0' to be used in constant expressions
+ */
+#define STATIC_ASSERT_ZERO(expr) ((int)sizeof(char[-!(expr)]))
+
+/* UNALIGNED_ACCESS_IS_FAST should be defined to 1 if unaligned memory accesses
+ * can be performed efficiently on the target platform.
+ */
+#if defined(__x86_64__) || defined(__i386__) || defined(__ARM_FEATURE_UNALIGNED)
+# define UNALIGNED_ACCESS_IS_FAST 1
+#else
+# define UNALIGNED_ACCESS_IS_FAST 0
+#endif
+
+/* ========================================================================== */
+/* Unaligned memory accesses */
+/* ========================================================================== */
+
+#define load_word_unaligned(p) get_unaligned((const size_t *)(p))
+#define store_word_unaligned(v, p) put_unaligned((v), (size_t *)(p))
+
+
+/* ========================================================================== */
+/* Bit scan functions */
+/* ========================================================================== */
+
+/*
+ * Bit Scan Reverse (BSR) - find the 0-based index (relative to the least
+ * significant end) of the *most* significant 1 bit in the input value. The
+ * input value must be nonzero!
+ */
+
+#ifndef bsr32
+static forceinline u32
+bsr32(u32 v)
+{
+ u32 bit = 0;
+
+ while ((v >>= 1) != 0)
+ bit++;
+ return bit;
+}
+#endif
+
+#ifndef bsr64
+static forceinline u32
+bsr64(u64 v)
+{
+ u32 bit = 0;
+
+ while ((v >>= 1) != 0)
+ bit++;
+ return bit;
+}
+#endif
+
+static forceinline u32
+bsrw(size_t v)
+{
+ STATIC_ASSERT(WORDBITS == 32 || WORDBITS == 64);
+ if (WORDBITS == 32)
+ return bsr32(v);
+ else
+ return bsr64(v);
+}
+
+/*
+ * Bit Scan Forward (BSF) - find the 0-based index (relative to the least
+ * significant end) of the *least* significant 1 bit in the input value. The
+ * input value must be nonzero!
+ */
+
+#ifndef bsf32
+static forceinline u32
+bsf32(u32 v)
+{
+ u32 bit;
+
+ for (bit = 0; !(v & 1); bit++, v >>= 1)
+ ;
+ return bit;
+}
+#endif
+
+#ifndef bsf64
+static forceinline u32
+bsf64(u64 v)
+{
+ u32 bit;
+
+ for (bit = 0; !(v & 1); bit++, v >>= 1)
+ ;
+ return bit;
+}
+#endif
+
+static forceinline u32
+bsfw(size_t v)
+{
+ STATIC_ASSERT(WORDBITS == 32 || WORDBITS == 64);
+ if (WORDBITS == 32)
+ return bsf32(v);
+ else
+ return bsf64(v);
+}
+
+/* Return the log base 2 of 'n', rounded up to the nearest integer. */
+static forceinline u32
+ilog2_ceil(size_t n)
+{
+ if (n <= 1)
+ return 0;
+ return 1 + bsrw(n - 1);
+}
+
+/* ========================================================================== */
+/* Aligned memory allocation */
+/* ========================================================================== */
+
+static forceinline void *
+aligned_malloc(size_t size, size_t alignment)
+{
+ const uintptr_t mask = alignment - 1;
+ char *ptr = NULL;
+ char *raw_ptr;
+
+ raw_ptr = kmalloc(mask + sizeof(size_t) + size, GFP_NOFS);
+ if (raw_ptr) {
+ ptr = (char *)raw_ptr + sizeof(size_t);
+ ptr = (void *)(((uintptr_t)ptr + mask) & ~mask);
+ *((size_t *)ptr - 1) = ptr - raw_ptr;
+ }
+ return ptr;
+}
+
+static forceinline void
+aligned_free(void *ptr)
+{
+ if (ptr)
+ kfree((char *)ptr - *((size_t *)ptr - 1));
+}
+
+extern void *aligned_malloc(size_t size, size_t alignment);
+extern void aligned_free(void *ptr);
+
+#endif /* _COMMON_DEFS_H */
diff --git a/fs/ntfs3/lib/decompress_common.c b/fs/ntfs3/lib/decompress_common.c
new file mode 100644
index 000000000000..f6381d214f48
--- /dev/null
+++ b/fs/ntfs3/lib/decompress_common.c
@@ -0,0 +1,314 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * decompress_common.c
+ *
+ * Code for decompression shared among multiple compression formats.
+ *
+ * The following copying information applies to this specific source code file:
+ *
+ * Written in 2012-2016 by Eric Biggers <ebiggers3@...il.com>
+ *
+ * To the extent possible under law, the author(s) have dedicated all copyright
+ * and related and neighboring rights to this software to the public domain
+ * worldwide via the Creative Commons Zero 1.0 Universal Public Domain
+ * Dedication (the "CC0").
+ *
+ * This software is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the CC0 for more details.
+ *
+ * You should have received a copy of the CC0 along with this software; if not
+ * see <http://creativecommons.org/publicdomain/zero/1.0/>.
+ */
+
+#include "decompress_common.h"
+
+/*
+ * make_huffman_decode_table() -
+ *
+ * Given an alphabet of symbols and the length of each symbol's codeword in a
+ * canonical prefix code, build a table for quickly decoding symbols that were
+ * encoded with that code.
+ *
+ * A _prefix code_ is an assignment of bitstrings called _codewords_ to symbols
+ * such that no whole codeword is a prefix of any other. A prefix code might be
+ * a _Huffman code_, which means that it is an optimum prefix code for a given
+ * list of symbol frequencies and was generated by the Huffman algorithm.
+ * Although the prefix codes processed here will ordinarily be "Huffman codes",
+ * strictly speaking the decoder cannot know whether a given code was actually
+ * generated by the Huffman algorithm or not.
+ *
+ * A prefix code is _canonical_ if and only if a longer codeword never
+ * lexicographically precedes a shorter codeword, and the lexicographic ordering
+ * of codewords of equal length is the same as the lexicographic ordering of the
+ * corresponding symbols. The advantage of using a canonical prefix code is
+ * that the codewords can be reconstructed from only the symbol => codeword
+ * length mapping. This eliminates the need to transmit the codewords
+ * explicitly. Instead, they can be enumerated in lexicographic order after
+ * sorting the symbols primarily by increasing codeword length and secondarily
+ * by increasing symbol value.
+ *
+ * However, the decoder's real goal is to decode symbols with the code, not just
+ * generate the list of codewords. Consequently, this function directly builds
+ * a table for efficiently decoding symbols using the code. The basic idea is
+ * that given the next 'max_codeword_len' bits of input, the decoder can look up
+ * the next decoded symbol by indexing a table containing '2^max_codeword_len'
+ * entries. A codeword with length 'max_codeword_len' will have exactly one
+ * entry in this table, whereas a codeword shorter than 'max_codeword_len' will
+ * have multiple entries in this table. Precisely, a codeword of length 'n'
+ * will have '2^(max_codeword_len - n)' entries. The index of each such entry,
+ * considered as a bitstring of length 'max_codeword_len', will contain the
+ * corresponding codeword as a prefix.
+ *
+ * That's the basic idea, but we extend it in two ways:
+ *
+ * - Often the maximum codeword length is too long for it to be efficient to
+ * build the full decode table whenever a new code is used. Instead, we build
+ * a "root" table using only '2^table_bits' entries, where 'table_bits <=
+ * max_codeword_len'. Then, a lookup of 'table_bits' bits produces either a
+ * symbol directly (for codewords not longer than 'table_bits'), or the index
+ * of a subtable which must be indexed with additional bits of input to fully
+ * decode the symbol (for codewords longer than 'table_bits').
+ *
+ * - Whenever the decoder decodes a symbol, it needs to know the codeword length
+ * so that it can remove the appropriate number of input bits. The obvious
+ * solution would be to simply retain the codeword lengths array and use the
+ * decoded symbol as an index into it. However, that would require two array
+ * accesses when decoding each symbol. Our strategy is to instead store the
+ * codeword length directly in the decode table entry along with the symbol.
+ *
+ * See MAKE_DECODE_TABLE_ENTRY() for full details on the format of decode table
+ * entries, and see read_huffsym() for full details on how symbols are decoded.
+ *
+ * @decode_table:
+ * The array in which to build the decode table. This must have been
+ * declared by the DECODE_TABLE() macro. This may alias @lens, since all
+ * @lens are consumed before the decode table is written to.
+ *
+ * @num_syms:
+ * The number of symbols in the alphabet.
+ *
+ * @table_bits:
+ * The log base 2 of the number of entries in the root table.
+ *
+ * @lens:
+ * An array of length @num_syms, indexed by symbol, that gives the length
+ * of the codeword, in bits, for each symbol. The length can be 0, which
+ * means that the symbol does not have a codeword assigned. In addition,
+ * @lens may alias @decode_table, as noted above.
+ *
+ * @max_codeword_len:
+ * The maximum codeword length permitted for this code. All entries in
+ * 'lens' must be less than or equal to this value.
+ *
+ * @working_space
+ * A temporary array that was declared with DECODE_TABLE_WORKING_SPACE().
+ *
+ * Returns 0 on success, or -1 if the lengths do not form a valid prefix code.
+ */
+int
+make_huffman_decode_table(u16 decode_table[], u32 num_syms,
+ u32 table_bits, const u8 lens[],
+ u32 max_codeword_len, u16 working_space[])
+{
+ u16 * const len_counts = &working_space[0];
+ u16 * const offsets = &working_space[1 * (max_codeword_len + 1)];
+ u16 * const sorted_syms = &working_space[2 * (max_codeword_len + 1)];
+ s32 remainder = 1;
+ void *entry_ptr = decode_table;
+ u32 codeword_len = 1;
+ u32 sym_idx;
+ u32 codeword;
+ u32 subtable_pos;
+ u32 subtable_bits;
+ u32 subtable_prefix;
+ u32 len;
+ u32 sym;
+ u32 stores_per_loop;
+
+ /* Count how many codewords have each length, including 0. */
+ for (len = 0; len <= max_codeword_len; len++)
+ len_counts[len] = 0;
+ for (sym = 0; sym < num_syms; sym++)
+ len_counts[lens[sym]]++;
+
+ /* It is already guaranteed that all lengths are <= max_codeword_len,
+ * but it cannot be assumed they form a complete prefix code. A
+ * codeword of length n should require a proportion of the codespace
+ * equaling (1/2)^n. The code is complete if and only if, by this
+ * measure, the codespace is exactly filled by the lengths.
+ */
+ for (len = 1; len <= max_codeword_len; len++) {
+ remainder = (remainder << 1) - len_counts[len];
+ /* Do the lengths overflow the codespace? */
+ if (unlikely(remainder < 0))
+ return -1;
+ }
+
+ if (remainder != 0) {
+ /* The lengths do not fill the codespace; that is, they form an
+ * incomplete code. This is permitted only if the code is empty
+ * (contains no symbols).
+ */
+
+ if (unlikely(remainder != 1U << max_codeword_len))
+ return -1;
+
+ /* The code is empty. When processing a well-formed stream, the
+ * decode table need not be initialized in this case. However,
+ * we cannot assume the stream is well-formed, so we must
+ * initialize the decode table anyway. Setting all entries to 0
+ * makes the decode table always produce symbol '0' without
+ * consuming any bits, which is good enough.
+ */
+ memset(decode_table, 0, sizeof(decode_table[0]) << table_bits);
+ return 0;
+ }
+
+ /* Sort the symbols primarily by increasing codeword length and
+ * secondarily by increasing symbol value.
+ */
+
+ /* Initialize 'offsets' so that 'offsets[len]' is the number of
+ * codewords shorter than 'len' bits, including length 0.
+ */
+ offsets[0] = 0;
+ for (len = 0; len < max_codeword_len; len++)
+ offsets[len + 1] = offsets[len] + len_counts[len];
+
+ /* Use the 'offsets' array to sort the symbols. */
+ for (sym = 0; sym < num_syms; sym++)
+ sorted_syms[offsets[lens[sym]]++] = sym;
+
+ /*
+ * Fill the root table entries for codewords no longer than table_bits.
+ *
+ * The table will start with entries for the shortest codeword(s), which
+ * will have the most entries. From there, the number of entries per
+ * codeword will decrease. As an optimization, we may begin filling
+ * entries with SSE2 vector accesses (8 entries/store), then change to
+ * word accesses (2 or 4 entries/store), then change to 16-bit accesses
+ * (1 entry/store).
+ */
+ sym_idx = offsets[0];
+
+ /* Fill entries one word (2 or 4 entries) at a time. */
+ for (stores_per_loop = (1U << (table_bits - codeword_len)) /
+ (WORDBYTES / sizeof(decode_table[0]));
+ stores_per_loop != 0; codeword_len++, stores_per_loop >>= 1){
+ u32 end_sym_idx = sym_idx + len_counts[codeword_len];
+
+ for (; sym_idx < end_sym_idx; sym_idx++) {
+ /* Accessing the array of u16 as u32 or u64 would
+ * violate strict aliasing and would require compiling
+ * the code with -fno-strict-aliasing to guarantee
+ * correctness. To work around this problem, use the
+ * gcc 'may_alias' extension.
+ */
+ size_t v = repeat_u16(
+ MAKE_DECODE_TABLE_ENTRY(sorted_syms[sym_idx],
+ codeword_len));
+ u32 n = stores_per_loop;
+
+ do {
+ *(size_t __attribute__((may_alias)) *)entry_ptr = v;
+ entry_ptr += sizeof(v);
+ } while (--n);
+ }
+ }
+
+ /* Fill entries one at a time. */
+ for (stores_per_loop = (1U << (table_bits - codeword_len));
+ stores_per_loop != 0; codeword_len++, stores_per_loop >>= 1){
+ u32 end_sym_idx = sym_idx + len_counts[codeword_len];
+
+ for (; sym_idx < end_sym_idx; sym_idx++) {
+ u16 v = MAKE_DECODE_TABLE_ENTRY(sorted_syms[sym_idx],
+ codeword_len);
+ u32 n = stores_per_loop;
+
+ do {
+ *(u16 *)entry_ptr = v;
+ entry_ptr += sizeof(v);
+ } while (--n);
+ }
+ }
+
+ /* If all symbols were processed, then no subtables are required. */
+ if (sym_idx == num_syms)
+ return 0;
+
+ /* At least one subtable is required. Process the remaining symbols. */
+ codeword = ((u16 *)entry_ptr - decode_table) << 1;
+ subtable_pos = 1U << table_bits;
+ subtable_bits = table_bits;
+ subtable_prefix = -1;
+ do {
+ u32 prefix;
+ u16 entry;
+ u32 n;
+
+ while (len_counts[codeword_len] == 0) {
+ codeword_len++;
+ codeword <<= 1;
+ }
+
+ prefix = codeword >> (codeword_len - table_bits);
+
+ /* Start a new subtable if the first 'table_bits' bits of the
+ * codeword don't match the prefix for the previous subtable, or
+ * if this will be the first subtable.
+ */
+ if (prefix != subtable_prefix) {
+
+ subtable_prefix = prefix;
+
+ /*
+ * Calculate the subtable length. If the codeword
+ * length exceeds 'table_bits' by n, then the subtable
+ * needs at least 2^n entries. But it may need more; if
+ * there are fewer than 2^n codewords of length
+ * 'table_bits + n' remaining, then n will need to be
+ * incremented to bring in longer codewords until the
+ * subtable can be filled completely. Note that it
+ * always will, eventually, be possible to fill the
+ * subtable, since it was previously verified that the
+ * code is complete.
+ */
+ subtable_bits = codeword_len - table_bits;
+ remainder = (s32)1 << subtable_bits;
+ for (;;) {
+ remainder -= len_counts[table_bits +
+ subtable_bits];
+ if (remainder <= 0)
+ break;
+ subtable_bits++;
+ remainder <<= 1;
+ }
+
+ /* Create the entry that points from the root table to
+ * the subtable. This entry contains the index of the
+ * start of the subtable and the number of bits with
+ * which the subtable is indexed (the log base 2 of the
+ * number of entries it contains).
+ */
+ decode_table[subtable_prefix] =
+ MAKE_DECODE_TABLE_ENTRY(subtable_pos,
+ subtable_bits);
+ }
+
+ /* Fill the subtable entries for this symbol. */
+ entry = MAKE_DECODE_TABLE_ENTRY(sorted_syms[sym_idx],
+ codeword_len - table_bits);
+ n = 1U << (subtable_bits - (codeword_len -
+ table_bits));
+ do {
+ decode_table[subtable_pos++] = entry;
+ } while (--n);
+
+ len_counts[codeword_len]--;
+ codeword++;
+ } while (++sym_idx < num_syms);
+
+ return 0;
+}
diff --git a/fs/ntfs3/lib/decompress_common.h b/fs/ntfs3/lib/decompress_common.h
new file mode 100644
index 000000000000..11f644687395
--- /dev/null
+++ b/fs/ntfs3/lib/decompress_common.h
@@ -0,0 +1,558 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * decompress_common.h
+ *
+ * Header for decompression code shared by multiple compression formats.
+ *
+ * The following copying information applies to this specific source code file:
+ *
+ * Written in 2012-2016 by Eric Biggers <ebiggers3@...il.com>
+ *
+ * To the extent possible under law, the author(s) have dedicated all copyright
+ * and related and neighboring rights to this software to the public domain
+ * worldwide via the Creative Commons Zero 1.0 Universal Public Domain
+ * Dedication (the "CC0").
+ *
+ * This software is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the CC0 for more details.
+ *
+ * You should have received a copy of the CC0 along with this software; if not
+ * see <http://creativecommons.org/publicdomain/zero/1.0/>.
+ */
+
+#ifndef _DECOMPRESS_COMMON_H
+#define _DECOMPRESS_COMMON_H
+
+#include "common_defs.h"
+
+/******************************************************************************/
+/* Input bitstream for XPRESS and LZX */
+/*----------------------------------------------------------------------------*/
+
+/* Structure that encapsulates a block of in-memory data being interpreted as a
+ * stream of bits, optionally with interwoven literal bytes. Bits are assumed
+ * to be stored in little endian 16-bit coding units, with the bits ordered high
+ * to low.
+ */
+struct input_bitstream {
+
+ /* Bits that have been read from the input buffer. The bits are
+ * left-justified; the next bit is always bit 31.
+ */
+ u32 bitbuf;
+
+ /* Number of bits currently held in @bitbuf. */
+ u32 bitsleft;
+
+ /* Pointer to the next byte to be retrieved from the input buffer. */
+ const u8 *next;
+
+ /* Pointer past the end of the input buffer. */
+ const u8 *end;
+};
+
+/* Initialize a bitstream to read from the specified input buffer. */
+static forceinline void
+init_input_bitstream(struct input_bitstream *is, const void *buffer, u32 size)
+{
+ is->bitbuf = 0;
+ is->bitsleft = 0;
+ is->next = buffer;
+ is->end = is->next + size;
+}
+
+/* Note: for performance reasons, the following methods don't return error codes
+ * to the caller if the input buffer is overrun. Instead, they just assume that
+ * all overrun data is zeroes. This has no effect on well-formed compressed
+ * data. The only disadvantage is that bad compressed data may go undetected,
+ * but even this is irrelevant if higher level code checksums the uncompressed
+ * data anyway.
+ */
+
+/* Ensure the bit buffer variable for the bitstream contains at least @num_bits
+ * bits. Following this, bitstream_peek_bits() and/or bitstream_remove_bits()
+ * may be called on the bitstream to peek or remove up to @num_bits bits.
+ */
+static forceinline void
+bitstream_ensure_bits(struct input_bitstream *is, const u32 num_bits)
+{
+ /* This currently works for at most 17 bits. */
+
+ if (is->bitsleft >= num_bits)
+ return;
+
+ if (unlikely(is->end - is->next < 2))
+ goto overflow;
+
+ is->bitbuf |= (u32)get_unaligned_le16(is->next) << (16 - is->bitsleft);
+ is->next += 2;
+ is->bitsleft += 16;
+
+ if (unlikely(num_bits == 17 && is->bitsleft == 16)) {
+ if (unlikely(is->end - is->next < 2))
+ goto overflow;
+
+ is->bitbuf |= (u32)get_unaligned_le16(is->next);
+ is->next += 2;
+ is->bitsleft = 32;
+ }
+
+ return;
+
+overflow:
+ is->bitsleft = 32;
+}
+
+/* Return the next @num_bits bits from the bitstream, without removing them.
+ * There must be at least @num_bits remaining in the buffer variable, from a
+ * previous call to bitstream_ensure_bits().
+ */
+static forceinline u32
+bitstream_peek_bits(const struct input_bitstream *is, const u32 num_bits)
+{
+ return (is->bitbuf >> 1) >> (sizeof(is->bitbuf) * 8 - num_bits - 1);
+}
+
+/* Remove @num_bits from the bitstream. There must be at least @num_bits
+ * remaining in the buffer variable, from a previous call to
+ * bitstream_ensure_bits().
+ */
+static forceinline void
+bitstream_remove_bits(struct input_bitstream *is, u32 num_bits)
+{
+ is->bitbuf <<= num_bits;
+ is->bitsleft -= num_bits;
+}
+
+/* Remove and return @num_bits bits from the bitstream. There must be at least
+ * @num_bits remaining in the buffer variable, from a previous call to
+ * bitstream_ensure_bits().
+ */
+static forceinline u32
+bitstream_pop_bits(struct input_bitstream *is, u32 num_bits)
+{
+ u32 bits = bitstream_peek_bits(is, num_bits);
+
+ bitstream_remove_bits(is, num_bits);
+ return bits;
+}
+
+/* Read and return the next @num_bits bits from the bitstream. */
+static forceinline u32
+bitstream_read_bits(struct input_bitstream *is, u32 num_bits)
+{
+ bitstream_ensure_bits(is, num_bits);
+ return bitstream_pop_bits(is, num_bits);
+}
+
+/* Read and return the next literal byte embedded in the bitstream. */
+static forceinline u8
+bitstream_read_byte(struct input_bitstream *is)
+{
+ if (unlikely(is->end == is->next))
+ return 0;
+ return *is->next++;
+}
+
+/* Read and return the next 16-bit integer embedded in the bitstream. */
+static forceinline u16
+bitstream_read_u16(struct input_bitstream *is)
+{
+ u16 v;
+
+ if (unlikely(is->end - is->next < 2))
+ return 0;
+ v = get_unaligned_le16(is->next);
+ is->next += 2;
+ return v;
+}
+
+/* Read and return the next 32-bit integer embedded in the bitstream. */
+static forceinline u32
+bitstream_read_u32(struct input_bitstream *is)
+{
+ u32 v;
+
+ if (unlikely(is->end - is->next < 4))
+ return 0;
+ v = get_unaligned_le32(is->next);
+ is->next += 4;
+ return v;
+}
+
+/* Read into @dst_buffer an array of literal bytes embedded in the bitstream.
+ * Return 0 if there were enough bytes remaining in the input, otherwise -1.
+ */
+static forceinline int
+bitstream_read_bytes(struct input_bitstream *is, void *dst_buffer, size_t count)
+{
+ if (unlikely(is->end - is->next < count))
+ return -1;
+ memcpy(dst_buffer, is->next, count);
+ is->next += count;
+ return 0;
+}
+
+/* Align the input bitstream on a coding-unit boundary. */
+static forceinline void
+bitstream_align(struct input_bitstream *is)
+{
+ is->bitsleft = 0;
+ is->bitbuf = 0;
+}
+
+/******************************************************************************/
+/* Huffman decoding */
+/*----------------------------------------------------------------------------*/
+
+/*
+ * Required alignment for the Huffman decode tables. We require this alignment
+ * so that we can fill the entries with vector or word instructions and not have
+ * to deal with misaligned buffers.
+ */
+#define DECODE_TABLE_ALIGNMENT 16
+
+/*
+ * Each decode table entry is 16 bits divided into two fields: 'symbol' (high 12
+ * bits) and 'length' (low 4 bits). The precise meaning of these fields depends
+ * on the type of entry:
+ *
+ * Root table entries which are *not* subtable pointers:
+ * symbol: symbol to decode
+ * length: codeword length in bits
+ *
+ * Root table entries which are subtable pointers:
+ * symbol: index of start of subtable
+ * length: number of bits with which the subtable is indexed
+ *
+ * Subtable entries:
+ * symbol: symbol to decode
+ * length: codeword length in bits, minus the number of bits with which the
+ * root table is indexed
+ */
+#define DECODE_TABLE_SYMBOL_SHIFT 4
+#define DECODE_TABLE_MAX_SYMBOL ((1 << (16 - DECODE_TABLE_SYMBOL_SHIFT)) - 1)
+#define DECODE_TABLE_MAX_LENGTH ((1 << DECODE_TABLE_SYMBOL_SHIFT) - 1)
+#define DECODE_TABLE_LENGTH_MASK DECODE_TABLE_MAX_LENGTH
+#define MAKE_DECODE_TABLE_ENTRY(symbol, length) \
+ (((symbol) << DECODE_TABLE_SYMBOL_SHIFT) | (length))
+
+/*
+ * Read and return the next Huffman-encoded symbol from the given bitstream
+ * using the given decode table.
+ *
+ * If the input data is exhausted, then the Huffman symbol will be decoded as if
+ * the missing bits were all zeroes.
+ *
+ * XXX: This is mostly duplicated in lzms_decode_huffman_symbol() in
+ * lzms_decompress.c; keep them in sync!
+ */
+static forceinline u32
+read_huffsym(struct input_bitstream *is, const u16 decode_table[],
+ u32 table_bits, u32 max_codeword_len)
+{
+ u32 entry;
+ u32 symbol;
+ u32 length;
+
+ /* Preload the bitbuffer with 'max_codeword_len' bits so that we're
+ * guaranteed to be able to fully decode a codeword.
+ */
+ bitstream_ensure_bits(is, max_codeword_len);
+
+ /* Index the root table by the next 'table_bits' bits of input. */
+ entry = decode_table[bitstream_peek_bits(is, table_bits)];
+
+ /* Extract the "symbol" and "length" from the entry. */
+ symbol = entry >> DECODE_TABLE_SYMBOL_SHIFT;
+ length = entry & DECODE_TABLE_LENGTH_MASK;
+
+ /* If the root table is indexed by the full 'max_codeword_len' bits,
+ * then there cannot be any subtables, and this will be known at compile
+ * time. Otherwise, we must check whether the decoded symbol is really
+ * a subtable pointer. If so, we must discard the bits with which the
+ * root table was indexed, then index the subtable by the next 'length'
+ * bits of input to get the real entry.
+ */
+ if (max_codeword_len > table_bits &&
+ entry >= (1U << (table_bits + DECODE_TABLE_SYMBOL_SHIFT))) {
+ /* Subtable required */
+ bitstream_remove_bits(is, table_bits);
+ entry = decode_table[symbol + bitstream_peek_bits(is, length)];
+ symbol = entry >> DECODE_TABLE_SYMBOL_SHIFT;
+ length = entry & DECODE_TABLE_LENGTH_MASK;
+ }
+
+ /* Discard the bits (or the remaining bits, if a subtable was required)
+ * of the codeword.
+ */
+ bitstream_remove_bits(is, length);
+
+ /* Return the decoded symbol. */
+ return symbol;
+}
+
+/*
+ * The DECODE_TABLE_ENOUGH() macro evaluates to the maximum number of decode
+ * table entries, including all subtable entries, that may be required for
+ * decoding a given Huffman code. This depends on three parameters:
+ *
+ * num_syms: the maximum number of symbols in the code
+ * table_bits: the number of bits with which the root table will be indexed
+ * max_codeword_len: the maximum allowed codeword length in the code
+ *
+ * Given these parameters, the utility program 'enough' from zlib, when passed
+ * the three arguments 'num_syms', 'table_bits', and 'max_codeword_len', will
+ * compute the maximum number of entries required. This has already been done
+ * for the combinations we need and incorporated into the macro below so that
+ * the mapping can be done at compilation time. If an unknown combination is
+ * used, then a compilation error will result. To fix this, use 'enough' to
+ * find the missing value and add it below. If that still doesn't fix the
+ * compilation error, then most likely a constraint would be violated by the
+ * requested parameters, so they cannot be used, at least without other changes
+ * to the decode table --- see DECODE_TABLE_SIZE().
+ */
+#define DECODE_TABLE_ENOUGH(num_syms, table_bits, max_codeword_len) ( \
+ ((num_syms) == 8 && (table_bits) == 7 && (max_codeword_len) == 15) ? 128 : \
+ ((num_syms) == 8 && (table_bits) == 5 && (max_codeword_len) == 7) ? 36 : \
+ ((num_syms) == 8 && (table_bits) == 6 && (max_codeword_len) == 7) ? 66 : \
+ ((num_syms) == 8 && (table_bits) == 7 && (max_codeword_len) == 7) ? 128 : \
+ ((num_syms) == 20 && (table_bits) == 5 && (max_codeword_len) == 15) ? 1062 : \
+ ((num_syms) == 20 && (table_bits) == 6 && (max_codeword_len) == 15) ? 582 : \
+ ((num_syms) == 20 && (table_bits) == 7 && (max_codeword_len) == 15) ? 390 : \
+ ((num_syms) == 54 && (table_bits) == 9 && (max_codeword_len) == 15) ? 618 : \
+ ((num_syms) == 54 && (table_bits) == 10 && (max_codeword_len) == 15) ? 1098 : \
+ ((num_syms) == 249 && (table_bits) == 9 && (max_codeword_len) == 16) ? 878 : \
+ ((num_syms) == 249 && (table_bits) == 10 && (max_codeword_len) == 16) ? 1326 : \
+ ((num_syms) == 249 && (table_bits) == 11 && (max_codeword_len) == 16) ? 2318 : \
+ ((num_syms) == 256 && (table_bits) == 9 && (max_codeword_len) == 15) ? 822 : \
+ ((num_syms) == 256 && (table_bits) == 10 && (max_codeword_len) == 15) ? 1302 : \
+ ((num_syms) == 256 && (table_bits) == 11 && (max_codeword_len) == 15) ? 2310 : \
+ ((num_syms) == 512 && (table_bits) == 10 && (max_codeword_len) == 15) ? 1558 : \
+ ((num_syms) == 512 && (table_bits) == 11 && (max_codeword_len) == 15) ? 2566 : \
+ ((num_syms) == 512 && (table_bits) == 12 && (max_codeword_len) == 15) ? 4606 : \
+ ((num_syms) == 656 && (table_bits) == 10 && (max_codeword_len) == 16) ? 1734 : \
+ ((num_syms) == 656 && (table_bits) == 11 && (max_codeword_len) == 16) ? 2726 : \
+ ((num_syms) == 656 && (table_bits) == 12 && (max_codeword_len) == 16) ? 4758 : \
+ ((num_syms) == 799 && (table_bits) == 9 && (max_codeword_len) == 15) ? 1366 : \
+ ((num_syms) == 799 && (table_bits) == 10 && (max_codeword_len) == 15) ? 1846 : \
+ ((num_syms) == 799 && (table_bits) == 11 && (max_codeword_len) == 15) ? 2854 : \
+ -1)
+
+/* Wrapper around DECODE_TABLE_ENOUGH() that does additional compile-time
+ * validation.
+ */
+#define DECODE_TABLE_SIZE(num_syms, table_bits, max_codeword_len) ( \
+ \
+ /* All values must be positive. */ \
+ STATIC_ASSERT_ZERO((num_syms) > 0) + \
+ STATIC_ASSERT_ZERO((table_bits) > 0) + \
+ STATIC_ASSERT_ZERO((max_codeword_len) > 0) + \
+ \
+ /* There cannot be more symbols than possible codewords. */ \
+ STATIC_ASSERT_ZERO((num_syms) <= 1U << (max_codeword_len)) + \
+ \
+ /* There is no reason for the root table to be indexed with */ \
+ /* more bits than the maximum codeword length. */ \
+ STATIC_ASSERT_ZERO((table_bits) <= (max_codeword_len)) + \
+ \
+ /* The maximum symbol value must fit in the 'symbol' field. */ \
+ STATIC_ASSERT_ZERO((num_syms) - 1 <= DECODE_TABLE_MAX_SYMBOL) + \
+ \
+ /* The maximum codeword length in the root table must fit in */ \
+ /* the 'length' field. */ \
+ STATIC_ASSERT_ZERO((table_bits) <= DECODE_TABLE_MAX_LENGTH) + \
+ \
+ /* The maximum codeword length in a subtable must fit in the */ \
+ /* 'length' field. */ \
+ STATIC_ASSERT_ZERO((max_codeword_len) - (table_bits) <= \
+ DECODE_TABLE_MAX_LENGTH) + \
+ \
+ /* The minimum subtable index must be greater than the maximum */\
+ /* symbol value. If this were not the case, then there would */\
+ /* be no way to tell whether a given root table entry is a */ \
+ /* "subtable pointer" or not. (An alternate solution would */ \
+ /* be to reserve a flag bit specifically for this purpose.) */ \
+ STATIC_ASSERT_ZERO((1U << (table_bits)) > (num_syms) - 1) + \
+ \
+ /* The needed 'enough' value must have been defined. */ \
+ STATIC_ASSERT_ZERO(DECODE_TABLE_ENOUGH( \
+ (num_syms), (table_bits), \
+ (max_codeword_len)) > 0) + \
+ \
+ /* The maximum subtable index must fit in the 'symbol' field. */\
+ STATIC_ASSERT_ZERO(DECODE_TABLE_ENOUGH( \
+ (num_syms), (table_bits), \
+ (max_codeword_len)) - 1 <= \
+ DECODE_TABLE_MAX_SYMBOL) + \
+ \
+ /* Finally, make the macro evaluate to the needed maximum */ \
+ /* number of decode table entries. */ \
+ DECODE_TABLE_ENOUGH((num_syms), (table_bits), \
+ (max_codeword_len)) \
+)
+
+
+/*
+ * Declare the decode table for a Huffman code, given several compile-time
+ * constants that describe the code. See DECODE_TABLE_ENOUGH() for details.
+ *
+ * Decode tables must be aligned to a DECODE_TABLE_ALIGNMENT-byte boundary.
+ * This implies that if a decode table is nested inside a dynamically allocated
+ * structure, then the outer structure must be allocated on a
+ * DECODE_TABLE_ALIGNMENT-byte aligned boundary as well.
+ */
+#define DECODE_TABLE(name, num_syms, table_bits, max_codeword_len) \
+ u16 name[DECODE_TABLE_SIZE((num_syms), (table_bits), \
+ (max_codeword_len))] \
+ _aligned_attribute(DECODE_TABLE_ALIGNMENT)
+
+/*
+ * Declare the temporary "working_space" array needed for building the decode
+ * table for a Huffman code.
+ */
+#define DECODE_TABLE_WORKING_SPACE(name, num_syms, max_codeword_len) \
+ u16 name[2 * ((max_codeword_len) + 1) + (num_syms)]
+
+extern int
+make_huffman_decode_table(u16 decode_table[], u32 num_syms,
+ u32 table_bits, const u8 lens[],
+ u32 max_codeword_len, u16 working_space[]);
+
+/******************************************************************************/
+/* LZ match copying */
+/*----------------------------------------------------------------------------*/
+
+static forceinline void
+copy_word_unaligned(const void *src, void *dst)
+{
+ store_word_unaligned(load_word_unaligned(src), dst);
+}
+
+static forceinline size_t
+repeat_u16(u16 b)
+{
+ size_t v = b;
+
+ STATIC_ASSERT(WORDBITS == 32 || WORDBITS == 64);
+ v |= v << 16;
+ v |= v << ((WORDBITS == 64) ? 32 : 0);
+ return v;
+}
+
+static forceinline size_t
+repeat_byte(u8 b)
+{
+ return repeat_u16(((u16)b << 8) | b);
+}
+
+/*
+ * Copy an LZ77 match of 'length' bytes from the match source at 'out_next -
+ * offset' to the match destination at 'out_next'. The source and destination
+ * may overlap.
+ *
+ * This handles validating the length and offset. It is validated that the
+ * beginning of the match source is '>= out_begin' and that end of the match
+ * destination is '<= out_end'. The return value is 0 if the match was valid
+ * (and was copied), otherwise -1.
+ *
+ * 'min_length' is a hint which specifies the minimum possible match length.
+ * This should be a compile-time constant.
+ */
+static forceinline int
+lz_copy(u32 length, u32 offset, u8 *out_begin, u8 *out_next, u8 *out_end,
+ u32 min_length)
+{
+ const u8 *src;
+ u8 *end;
+
+ /* Validate the offset. */
+ if (unlikely(offset > out_next - out_begin))
+ return -1;
+
+ /*
+ * Fast path: copy a match which is no longer than a few words, is not
+ * overlapped such that copying a word at a time would produce incorrect
+ * results, and is not too close to the end of the buffer. Note that
+ * this might copy more than the length of the match, but that's okay in
+ * this scenario.
+ */
+ src = out_next - offset;
+ if (UNALIGNED_ACCESS_IS_FAST && length <= 3 * WORDBYTES &&
+ offset >= WORDBYTES && out_end - out_next >= 3 * WORDBYTES) {
+ copy_word_unaligned(src + WORDBYTES*0, out_next + WORDBYTES*0);
+ copy_word_unaligned(src + WORDBYTES*1, out_next + WORDBYTES*1);
+ copy_word_unaligned(src + WORDBYTES*2, out_next + WORDBYTES*2);
+ return 0;
+ }
+
+ /* Validate the length. This isn't needed in the fast path above, due
+ * to the additional conditions tested, but we do need it here.
+ */
+ if (unlikely(length > out_end - out_next))
+ return -1;
+ end = out_next + length;
+
+ /*
+ * Try to copy one word at a time. On i386 and x86_64 this is faster
+ * than copying one byte at a time, unless the data is near-random and
+ * all the matches have very short lengths. Note that since this
+ * requires unaligned memory accesses, it won't necessarily be faster on
+ * every architecture.
+ *
+ * Also note that we might copy more than the length of the match. For
+ * example, if a word is 8 bytes and the match is of length 5, then
+ * we'll simply copy 8 bytes. This is okay as long as we don't write
+ * beyond the end of the output buffer, hence the check for (out_end -
+ * end >= WORDBYTES - 1).
+ */
+ if (UNALIGNED_ACCESS_IS_FAST && likely(out_end - end >= WORDBYTES - 1)) {
+ if (offset >= WORDBYTES) {
+ /* The source and destination words don't overlap. */
+ do {
+ copy_word_unaligned(src, out_next);
+ src += WORDBYTES;
+ out_next += WORDBYTES;
+ } while (out_next < end);
+ return 0;
+ } else if (offset == 1) {
+ /* Offset 1 matches are equivalent to run-length
+ * encoding of the previous byte. This case is common
+ * if the data contains many repeated bytes.
+ */
+ size_t v = repeat_byte(*(out_next - 1));
+
+ do {
+ store_word_unaligned(v, out_next);
+ src += WORDBYTES;
+ out_next += WORDBYTES;
+ } while (out_next < end);
+ return 0;
+ }
+ /*
+ * We don't bother with special cases for other 'offset <
+ * WORDBYTES', which are usually rarer than 'offset == 1'.
+ * Extra checks will just slow things down. Actually, it's
+ * possible to handle all the 'offset < WORDBYTES' cases using
+ * the same code, but it still becomes more complicated doesn't
+ * seem any faster overall; it definitely slows down the more
+ * common 'offset == 1' case.
+ */
+ }
+
+ /* Fall back to a bytewise copy. */
+ if (min_length >= 2)
+ *out_next++ = *src++;
+ if (min_length >= 3)
+ *out_next++ = *src++;
+ if (min_length >= 4)
+ *out_next++ = *src++;
+ do {
+ *out_next++ = *src++;
+ } while (out_next != end);
+ return 0;
+}
+
+#endif /* _DECOMPRESS_COMMON_H */
diff --git a/fs/ntfs3/lib/lzx_common.c b/fs/ntfs3/lib/lzx_common.c
new file mode 100644
index 000000000000..d89d0fac333c
--- /dev/null
+++ b/fs/ntfs3/lib/lzx_common.c
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * lzx_common.c - Common code for LZX compression and decompression.
+ */
+
+/*
+ * Copyright (C) 2012-2016 Eric Biggers
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation, either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "lzx_common.h"
+
+/* Mapping: offset slot => first match offset that uses that offset slot.
+ * The offset slots for repeat offsets map to "fake" offsets < 1.
+ */
+const s32 lzx_offset_slot_base[LZX_MAX_OFFSET_SLOTS + 1] = {
+ -2, -1, 0, 1, 2, /* 0 --- 4 */
+ 4, 6, 10, 14, 22, /* 5 --- 9 */
+ 30, 46, 62, 94, 126, /* 10 --- 14 */
+ 190, 254, 382, 510, 766, /* 15 --- 19 */
+ 1022, 1534, 2046, 3070, 4094, /* 20 --- 24 */
+ 6142, 8190, 12286, 16382, 24574, /* 25 --- 29 */
+ 32766, 49150, 65534, 98302, 131070, /* 30 --- 34 */
+ 196606, 262142, 393214, 524286, 655358, /* 35 --- 39 */
+ 786430, 917502, 1048574, 1179646, 1310718, /* 40 --- 44 */
+ 1441790, 1572862, 1703934, 1835006, 1966078, /* 45 --- 49 */
+ 2097150 /* extra */
+};
+
+/* Mapping: offset slot => how many extra bits must be read and added to the
+ * corresponding offset slot base to decode the match offset.
+ */
+const u8 lzx_extra_offset_bits[LZX_MAX_OFFSET_SLOTS] = {
+ 0, 0, 0, 0, 1,
+ 1, 2, 2, 3, 3,
+ 4, 4, 5, 5, 6,
+ 6, 7, 7, 8, 8,
+ 9, 9, 10, 10, 11,
+ 11, 12, 12, 13, 13,
+ 14, 14, 15, 15, 16,
+ 16, 17, 17, 17, 17,
+ 17, 17, 17, 17, 17,
+ 17, 17, 17, 17, 17,
+};
+
+
+/* Round the specified buffer size up to the next valid LZX window size, and
+ * return its order (log2). Or, if the buffer size is 0 or greater than the
+ * largest valid LZX window size, return 0.
+ */
+u32
+lzx_get_window_order(size_t max_bufsize)
+{
+ if (max_bufsize == 0 || max_bufsize > LZX_MAX_WINDOW_SIZE)
+ return 0;
+
+ return max(ilog2_ceil(max_bufsize), LZX_MIN_WINDOW_ORDER);
+}
+
+/* Given a valid LZX window order, return the number of symbols that will exist
+ * in the main Huffman code.
+ */
+u32
+lzx_get_num_main_syms(u32 window_order)
+{
+ /* Note: one would expect that the maximum match offset would be
+ * 'window_size - LZX_MIN_MATCH_LEN', which would occur if the first two
+ * bytes were to match the last two bytes. However, the format
+ * disallows this case. This reduces the number of needed offset slots
+ * by 1.
+ */
+ u32 window_size = (u32)1 << window_order;
+ u32 max_offset = window_size - LZX_MIN_MATCH_LEN - 1;
+ u32 num_offset_slots = 30;
+
+ while (max_offset >= lzx_offset_slot_base[num_offset_slots])
+ num_offset_slots++;
+
+ return LZX_NUM_CHARS + (num_offset_slots * LZX_NUM_LEN_HEADERS);
+}
+
+static void
+do_translate_target(void *target, s32 input_pos)
+{
+ s32 abs_offset, rel_offset;
+
+ rel_offset = get_unaligned_le32(target);
+ if (rel_offset >= -input_pos && rel_offset < LZX_WIM_MAGIC_FILESIZE) {
+ if (rel_offset < LZX_WIM_MAGIC_FILESIZE - input_pos) {
+ /* "good translation" */
+ abs_offset = rel_offset + input_pos;
+ } else {
+ /* "compensating translation" */
+ abs_offset = rel_offset - LZX_WIM_MAGIC_FILESIZE;
+ }
+ put_unaligned_le32(abs_offset, target);
+ }
+}
+
+static void
+undo_translate_target(void *target, s32 input_pos)
+{
+ s32 abs_offset, rel_offset;
+
+ abs_offset = get_unaligned_le32(target);
+ if (abs_offset >= 0) {
+ if (abs_offset < LZX_WIM_MAGIC_FILESIZE) {
+ /* "good translation" */
+ rel_offset = abs_offset - input_pos;
+ put_unaligned_le32(rel_offset, target);
+ }
+ } else {
+ if (abs_offset >= -input_pos) {
+ /* "compensating translation" */
+ rel_offset = abs_offset + LZX_WIM_MAGIC_FILESIZE;
+ put_unaligned_le32(rel_offset, target);
+ }
+ }
+}
+
+/*
+ * Do or undo the 'E8' preprocessing used in LZX. Before compression, the
+ * uncompressed data is preprocessed by changing the targets of x86 CALL
+ * instructions from relative offsets to absolute offsets. After decompression,
+ * the translation is undone by changing the targets of x86 CALL instructions
+ * from absolute offsets to relative offsets.
+ *
+ * Note that despite its intent, E8 preprocessing can be done on any data even
+ * if it is not actually x86 machine code. In fact, E8 preprocessing appears to
+ * always be used in LZX-compressed resources in WIM files; there is no bit to
+ * indicate whether it is used or not, unlike in the LZX compressed format as
+ * used in cabinet files, where a bit is reserved for that purpose.
+ *
+ * E8 preprocessing is disabled in the last 6 bytes of the uncompressed data,
+ * which really means the 5-byte call instruction cannot start in the last 10
+ * bytes of the uncompressed data. This is one of the errors in the LZX
+ * documentation.
+ *
+ * E8 preprocessing does not appear to be disabled after the 32768th chunk of a
+ * WIM resource, which apparently is another difference from the LZX compression
+ * used in cabinet files.
+ *
+ * E8 processing is supposed to take the file size as a parameter, as it is used
+ * in calculating the translated jump targets. But in WIM files, this file size
+ * is always the same (LZX_WIM_MAGIC_FILESIZE == 12000000).
+ */
+static void
+lzx_e8_filter(u8 *data, u32 size, void (*process_target)(void *, s32))
+{
+ /*
+ * A worthwhile optimization is to push the end-of-buffer check into the
+ * relatively rare E8 case. This is possible if we replace the last six
+ * bytes of data with E8 bytes; then we are guaranteed to hit an E8 byte
+ * before reaching end-of-buffer. In addition, this scheme guarantees
+ * that no translation can begin following an E8 byte in the last 10
+ * bytes because a 4-byte offset containing E8 as its high byte is a
+ * large negative number that is not valid for translation. That is
+ * exactly what we need.
+ */
+ u8 *tail;
+ u8 saved_bytes[6];
+ u8 *p;
+
+ if (size <= 10)
+ return;
+
+ tail = &data[size - 6];
+ memcpy(saved_bytes, tail, 6);
+ memset(tail, 0xE8, 6);
+ p = data;
+ for (;;) {
+ while (*p != 0xE8)
+ p++;
+ if (p >= tail)
+ break;
+ (*process_target)(p + 1, p - data);
+ p += 5;
+ }
+ memcpy(tail, saved_bytes, 6);
+}
+
+void
+lzx_preprocess(u8 *data, u32 size)
+{
+ lzx_e8_filter(data, size, do_translate_target);
+}
+
+void
+lzx_postprocess(u8 *data, u32 size)
+{
+ lzx_e8_filter(data, size, undo_translate_target);
+}
diff --git a/fs/ntfs3/lib/lzx_common.h b/fs/ntfs3/lib/lzx_common.h
new file mode 100644
index 000000000000..2c87a0c9b5b3
--- /dev/null
+++ b/fs/ntfs3/lib/lzx_common.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+/*
+ * lzx_common.h
+ *
+ * Declarations shared between LZX compression and decompression.
+ */
+
+#ifndef _LZX_COMMON_H
+#define _LZX_COMMON_H
+
+#include "lzx_constants.h"
+#include "common_defs.h"
+
+extern const s32 lzx_offset_slot_base[LZX_MAX_OFFSET_SLOTS + 1];
+
+extern const u8 lzx_extra_offset_bits[LZX_MAX_OFFSET_SLOTS];
+
+extern u32
+lzx_get_window_order(size_t max_bufsize);
+
+extern u32
+lzx_get_num_main_syms(u32 window_order);
+
+extern void
+lzx_preprocess(u8 *data, u32 size);
+
+extern void
+lzx_postprocess(u8 *data, u32 size);
+
+#endif /* _LZX_COMMON_H */
diff --git a/fs/ntfs3/lib/lzx_constants.h b/fs/ntfs3/lib/lzx_constants.h
new file mode 100644
index 000000000000..1115ce8ce5b1
--- /dev/null
+++ b/fs/ntfs3/lib/lzx_constants.h
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * lzx_constants.h
+ *
+ * Constants for the LZX compression format.
+ */
+
+#ifndef _LZX_CONSTANTS_H
+#define _LZX_CONSTANTS_H
+
+/* Number of literal byte values. */
+#define LZX_NUM_CHARS 256
+
+/* The smallest and largest allowed match lengths. */
+#define LZX_MIN_MATCH_LEN 2
+#define LZX_MAX_MATCH_LEN 257
+
+/* Number of distinct match lengths that can be represented. */
+#define LZX_NUM_LENS (LZX_MAX_MATCH_LEN - LZX_MIN_MATCH_LEN + 1)
+
+/* Number of match lengths for which no length symbol is required. */
+#define LZX_NUM_PRIMARY_LENS 7
+#define LZX_NUM_LEN_HEADERS (LZX_NUM_PRIMARY_LENS + 1)
+
+/* Valid values of the 3-bit block type field. */
+#define LZX_BLOCKTYPE_VERBATIM 1
+#define LZX_BLOCKTYPE_ALIGNED 2
+#define LZX_BLOCKTYPE_UNCOMPRESSED 3
+
+/* 'LZX_MIN_WINDOW_SIZE' and 'LZX_MAX_WINDOW_SIZE' are the minimum and maximum
+ * sizes of the sliding window.
+ */
+#define LZX_MIN_WINDOW_ORDER 15u
+#define LZX_MAX_WINDOW_ORDER 21
+#define LZX_MIN_WINDOW_SIZE (1UL << LZX_MIN_WINDOW_ORDER) /* 32768 */
+#define LZX_MAX_WINDOW_SIZE (1UL << LZX_MAX_WINDOW_ORDER) /* 2097152 */
+
+/* Maximum number of offset slots. (The actual number of offset slots depends
+ * on the window size.)
+ */
+#define LZX_MAX_OFFSET_SLOTS 50
+
+/* Maximum number of symbols in the main code. (The actual number of symbols in
+ * the main code depends on the window size.)
+ */
+#define LZX_MAINCODE_MAX_NUM_SYMBOLS \
+ (LZX_NUM_CHARS + (LZX_MAX_OFFSET_SLOTS * LZX_NUM_LEN_HEADERS))
+
+/* Number of symbols in the length code. */
+#define LZX_LENCODE_NUM_SYMBOLS (LZX_NUM_LENS - LZX_NUM_PRIMARY_LENS)
+
+/* Number of symbols in the pre-code. */
+#define LZX_PRECODE_NUM_SYMBOLS 20
+
+/* Number of bits in which each pre-code codeword length is represented. */
+#define LZX_PRECODE_ELEMENT_SIZE 4
+
+/* Number of low-order bits of each match offset that are entropy-encoded in
+ * aligned offset blocks.
+ */
+#define LZX_NUM_ALIGNED_OFFSET_BITS 3
+
+/* Number of symbols in the aligned offset code. */
+#define LZX_ALIGNEDCODE_NUM_SYMBOLS (1 << LZX_NUM_ALIGNED_OFFSET_BITS)
+
+/* Mask for the match offset bits that are entropy-encoded in aligned offset
+ * blocks.
+ */
+#define LZX_ALIGNED_OFFSET_BITMASK ((1 << LZX_NUM_ALIGNED_OFFSET_BITS) - 1)
+
+/* Number of bits in which each aligned offset codeword length is represented. */
+#define LZX_ALIGNEDCODE_ELEMENT_SIZE 3
+
+/* The first offset slot which requires an aligned offset symbol in aligned
+ * offset blocks.
+ */
+#define LZX_MIN_ALIGNED_OFFSET_SLOT 8
+
+/* The offset slot base for LZX_MIN_ALIGNED_OFFSET_SLOT. */
+#define LZX_MIN_ALIGNED_OFFSET 14
+
+/* The maximum number of extra offset bits in verbatim blocks. (One would need
+ * to subtract LZX_NUM_ALIGNED_OFFSET_BITS to get the number of extra offset
+ * bits in *aligned* blocks.)
+ */
+#define LZX_MAX_NUM_EXTRA_BITS 17
+
+/* Maximum lengths (in bits) for length-limited Huffman code construction. */
+#define LZX_MAX_MAIN_CODEWORD_LEN 16
+#define LZX_MAX_LEN_CODEWORD_LEN 16
+#define LZX_MAX_PRE_CODEWORD_LEN ((1 << LZX_PRECODE_ELEMENT_SIZE) - 1)
+#define LZX_MAX_ALIGNED_CODEWORD_LEN ((1 << LZX_ALIGNEDCODE_ELEMENT_SIZE) - 1)
+
+/* For LZX-compressed blocks in WIM resources, this value is always used as the
+ * filesize parameter for the call instruction (0xe8 byte) preprocessing, even
+ * though the blocks themselves are not this size, and the size of the actual
+ * file resource in the WIM file is very likely to be something entirely
+ * different as well.
+ */
+#define LZX_WIM_MAGIC_FILESIZE 12000000
+
+/* Assumed LZX block size when the encoded block size begins with a 0 bit.
+ * This is probably WIM-specific.
+ */
+#define LZX_DEFAULT_BLOCK_SIZE 32768
+
+/* Number of offsets in the recent (or "repeat") offsets queue. */
+#define LZX_NUM_RECENT_OFFSETS 3
+
+/* An offset of n bytes is actually encoded as (n + LZX_OFFSET_ADJUSTMENT). */
+#define LZX_OFFSET_ADJUSTMENT (LZX_NUM_RECENT_OFFSETS - 1)
+
+#endif /* _LZX_CONSTANTS_H */
diff --git a/fs/ntfs3/lib/lzx_decompress.c b/fs/ntfs3/lib/lzx_decompress.c
new file mode 100644
index 000000000000..d6897a394abe
--- /dev/null
+++ b/fs/ntfs3/lib/lzx_decompress.c
@@ -0,0 +1,553 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * lzx_decompress.c
+ *
+ * A decompressor for the LZX compression format, as used in WIM files.
+ */
+
+/*
+ * Copyright (C) 2012-2016 Eric Biggers
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation, either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * LZX is an LZ77 and Huffman-code based compression format that has many
+ * similarities to DEFLATE (the format used by zlib/gzip). The compression
+ * ratio is as good or better than DEFLATE. See lzx_compress.c for a format
+ * overview, and see https://en.wikipedia.org/wiki/LZX_(algorithm) for a
+ * historical overview. Here I make some pragmatic notes.
+ *
+ * The old specification for LZX is the document "Microsoft LZX Data Compression
+ * Format" (1997). It defines the LZX format as used in cabinet files. Allowed
+ * window sizes are 2^n where 15 <= n <= 21. However, this document contains
+ * several errors, so don't read too much into it...
+ *
+ * The new specification for LZX is the document "[MS-PATCH]: LZX DELTA
+ * Compression and Decompression" (2014). It defines the LZX format as used by
+ * Microsoft's binary patcher. It corrects several errors in the 1997 document
+ * and extends the format in several ways --- namely, optional reference data,
+ * up to 2^25 byte windows, and longer match lengths.
+ *
+ * WIM files use a more restricted form of LZX. No LZX DELTA extensions are
+ * present, the window is not "sliding", E8 preprocessing is done
+ * unconditionally with a fixed file size, and the maximum window size is always
+ * 2^15 bytes (equal to the size of each "chunk" in a compressed WIM resource).
+ * This code is primarily intended to implement this form of LZX. But although
+ * not compatible with WIMGAPI, this code also supports maximum window sizes up
+ * to 2^21 bytes.
+ *
+ * TODO: Add support for window sizes up to 2^25 bytes.
+ */
+
+#include "decompress_common.h"
+#include "lzx_common.h"
+
+/* These values are chosen for fast decompression. */
+#define LZX_MAINCODE_TABLEBITS 11
+#define LZX_LENCODE_TABLEBITS 9
+#define LZX_PRECODE_TABLEBITS 6
+#define LZX_ALIGNEDCODE_TABLEBITS 7
+
+#define LZX_READ_LENS_MAX_OVERRUN 50
+
+struct lzx_decompressor {
+
+ DECODE_TABLE(maincode_decode_table, LZX_MAINCODE_MAX_NUM_SYMBOLS,
+ LZX_MAINCODE_TABLEBITS, LZX_MAX_MAIN_CODEWORD_LEN);
+ u8 maincode_lens[LZX_MAINCODE_MAX_NUM_SYMBOLS + LZX_READ_LENS_MAX_OVERRUN];
+
+ DECODE_TABLE(lencode_decode_table, LZX_LENCODE_NUM_SYMBOLS,
+ LZX_LENCODE_TABLEBITS, LZX_MAX_LEN_CODEWORD_LEN);
+ u8 lencode_lens[LZX_LENCODE_NUM_SYMBOLS + LZX_READ_LENS_MAX_OVERRUN];
+
+ union {
+ DECODE_TABLE(alignedcode_decode_table, LZX_ALIGNEDCODE_NUM_SYMBOLS,
+ LZX_ALIGNEDCODE_TABLEBITS, LZX_MAX_ALIGNED_CODEWORD_LEN);
+ u8 alignedcode_lens[LZX_ALIGNEDCODE_NUM_SYMBOLS];
+ };
+
+ union {
+ DECODE_TABLE(precode_decode_table, LZX_PRECODE_NUM_SYMBOLS,
+ LZX_PRECODE_TABLEBITS, LZX_MAX_PRE_CODEWORD_LEN);
+ u8 precode_lens[LZX_PRECODE_NUM_SYMBOLS];
+ u8 extra_offset_bits[LZX_MAX_OFFSET_SLOTS];
+ };
+
+ union {
+ DECODE_TABLE_WORKING_SPACE(maincode_working_space,
+ LZX_MAINCODE_MAX_NUM_SYMBOLS,
+ LZX_MAX_MAIN_CODEWORD_LEN);
+ DECODE_TABLE_WORKING_SPACE(lencode_working_space,
+ LZX_LENCODE_NUM_SYMBOLS,
+ LZX_MAX_LEN_CODEWORD_LEN);
+ DECODE_TABLE_WORKING_SPACE(alignedcode_working_space,
+ LZX_ALIGNEDCODE_NUM_SYMBOLS,
+ LZX_MAX_ALIGNED_CODEWORD_LEN);
+ DECODE_TABLE_WORKING_SPACE(precode_working_space,
+ LZX_PRECODE_NUM_SYMBOLS,
+ LZX_MAX_PRE_CODEWORD_LEN);
+ };
+
+ u32 window_order;
+ u32 num_main_syms;
+
+ /* Like lzx_extra_offset_bits[], but does not include the entropy-coded
+ * bits of aligned offset blocks
+ */
+ u8 extra_offset_bits_minus_aligned[LZX_MAX_OFFSET_SLOTS];
+
+} _aligned_attribute(DECODE_TABLE_ALIGNMENT);
+
+/* Read a Huffman-encoded symbol using the precode. */
+static forceinline u32
+read_presym(const struct lzx_decompressor *d, struct input_bitstream *is)
+{
+ return read_huffsym(is, d->precode_decode_table,
+ LZX_PRECODE_TABLEBITS, LZX_MAX_PRE_CODEWORD_LEN);
+}
+
+/* Read a Huffman-encoded symbol using the main code. */
+static forceinline u32
+read_mainsym(const struct lzx_decompressor *d, struct input_bitstream *is)
+{
+ return read_huffsym(is, d->maincode_decode_table,
+ LZX_MAINCODE_TABLEBITS, LZX_MAX_MAIN_CODEWORD_LEN);
+}
+
+/* Read a Huffman-encoded symbol using the length code. */
+static forceinline u32
+read_lensym(const struct lzx_decompressor *d, struct input_bitstream *is)
+{
+ return read_huffsym(is, d->lencode_decode_table,
+ LZX_LENCODE_TABLEBITS, LZX_MAX_LEN_CODEWORD_LEN);
+}
+
+/* Read a Huffman-encoded symbol using the aligned offset code. */
+static forceinline u32
+read_alignedsym(const struct lzx_decompressor *d, struct input_bitstream *is)
+{
+ return read_huffsym(is, d->alignedcode_decode_table,
+ LZX_ALIGNEDCODE_TABLEBITS, LZX_MAX_ALIGNED_CODEWORD_LEN);
+}
+
+/*
+ * Read a precode from the compressed input bitstream, then use it to decode
+ * @num_lens codeword length values and write them to @lens.
+ */
+static int
+lzx_read_codeword_lens(struct lzx_decompressor *d, struct input_bitstream *is,
+ u8 *lens, u32 num_lens)
+{
+ u8 *len_ptr = lens;
+ u8 *lens_end = lens + num_lens;
+ int i;
+
+ /* Read the lengths of the precode codewords. These are stored
+ * explicitly.
+ */
+ for (i = 0; i < LZX_PRECODE_NUM_SYMBOLS; i++) {
+ d->precode_lens[i] =
+ bitstream_read_bits(is, LZX_PRECODE_ELEMENT_SIZE);
+ }
+
+ /* Build the decoding table for the precode. */
+ if (make_huffman_decode_table(d->precode_decode_table,
+ LZX_PRECODE_NUM_SYMBOLS,
+ LZX_PRECODE_TABLEBITS,
+ d->precode_lens,
+ LZX_MAX_PRE_CODEWORD_LEN,
+ d->precode_working_space))
+ return -1;
+
+ /* Decode the codeword lengths. */
+ do {
+ u32 presym;
+ u8 len;
+
+ /* Read the next precode symbol. */
+ presym = read_presym(d, is);
+ if (presym < 17) {
+ /* Difference from old length */
+ len = *len_ptr - presym;
+ if ((s8)len < 0)
+ len += 17;
+ *len_ptr++ = len;
+ } else {
+ /* Special RLE values */
+
+ u32 run_len;
+
+ if (presym == 17) {
+ /* Run of 0's */
+ run_len = 4 + bitstream_read_bits(is, 4);
+ len = 0;
+ } else if (presym == 18) {
+ /* Longer run of 0's */
+ run_len = 20 + bitstream_read_bits(is, 5);
+ len = 0;
+ } else {
+ /* Run of identical lengths */
+ run_len = 4 + bitstream_read_bits(is, 1);
+ presym = read_presym(d, is);
+ if (unlikely(presym > 17))
+ return -1;
+ len = *len_ptr - presym;
+ if ((s8)len < 0)
+ len += 17;
+ }
+
+ do {
+ *len_ptr++ = len;
+ } while (--run_len);
+ /*
+ * The worst case overrun is when presym == 18,
+ * run_len == 20 + 31, and only 1 length was remaining.
+ * So LZX_READ_LENS_MAX_OVERRUN == 50.
+ *
+ * Overrun while reading the first half of maincode_lens
+ * can corrupt the previous values in the second half.
+ * This doesn't really matter because the resulting
+ * lengths will still be in range, and data that
+ * generates overruns is invalid anyway.
+ */
+ }
+ } while (len_ptr < lens_end);
+
+ return 0;
+}
+
+/*
+ * Read the header of an LZX block. For all block types, the block type and
+ * size is saved in *block_type_ret and *block_size_ret, respectively. For
+ * compressed blocks, the codeword lengths are also saved. For uncompressed
+ * blocks, the recent offsets queue is also updated.
+ */
+static int
+lzx_read_block_header(struct lzx_decompressor *d, struct input_bitstream *is,
+ u32 recent_offsets[], int *block_type_ret,
+ u32 *block_size_ret)
+{
+ int block_type;
+ u32 block_size;
+ int i;
+
+ bitstream_ensure_bits(is, 4);
+
+ /* Read the block type. */
+ block_type = bitstream_pop_bits(is, 3);
+
+ /* Read the block size. */
+ if (bitstream_pop_bits(is, 1)) {
+ block_size = LZX_DEFAULT_BLOCK_SIZE;
+ } else {
+ block_size = bitstream_read_bits(is, 16);
+ if (d->window_order >= 16) {
+ block_size <<= 8;
+ block_size |= bitstream_read_bits(is, 8);
+ }
+ }
+
+ switch (block_type) {
+
+ case LZX_BLOCKTYPE_ALIGNED:
+
+ /* Read the aligned offset codeword lengths. */
+
+ for (i = 0; i < LZX_ALIGNEDCODE_NUM_SYMBOLS; i++) {
+ d->alignedcode_lens[i] =
+ bitstream_read_bits(is,
+ LZX_ALIGNEDCODE_ELEMENT_SIZE);
+ }
+
+ /* Fall though, since the rest of the header for aligned offset
+ * blocks is the same as that for verbatim blocks.
+ */
+ fallthrough;
+
+ case LZX_BLOCKTYPE_VERBATIM:
+
+ /* Read the main codeword lengths, which are divided into two
+ * parts: literal symbols and match headers.
+ */
+ if (lzx_read_codeword_lens(d, is, d->maincode_lens,
+ LZX_NUM_CHARS))
+ return -1;
+
+ if (lzx_read_codeword_lens(d, is, d->maincode_lens + LZX_NUM_CHARS,
+ d->num_main_syms - LZX_NUM_CHARS))
+ return -1;
+
+
+ /* Read the length codeword lengths. */
+
+ if (lzx_read_codeword_lens(d, is, d->lencode_lens,
+ LZX_LENCODE_NUM_SYMBOLS))
+ return -1;
+
+ break;
+
+ case LZX_BLOCKTYPE_UNCOMPRESSED:
+ /*
+ * The header of an uncompressed block contains new values for
+ * the recent offsets queue, starting on the next 16-bit
+ * boundary in the bitstream. Careful: if the stream is
+ * *already* aligned, the correct thing to do is to throw away
+ * the next 16 bits (this is probably a mistake in the format).
+ */
+ bitstream_ensure_bits(is, 1);
+ bitstream_align(is);
+ recent_offsets[0] = bitstream_read_u32(is);
+ recent_offsets[1] = bitstream_read_u32(is);
+ recent_offsets[2] = bitstream_read_u32(is);
+
+ /* Offsets of 0 are invalid. */
+ if (recent_offsets[0] == 0 || recent_offsets[1] == 0 ||
+ recent_offsets[2] == 0)
+ return -1;
+ break;
+
+ default:
+ /* Unrecognized block type. */
+ return -1;
+ }
+
+ *block_type_ret = block_type;
+ *block_size_ret = block_size;
+ return 0;
+}
+
+/* Decompress a block of LZX-compressed data. */
+static int
+lzx_decompress_block(struct lzx_decompressor *d, struct input_bitstream *is,
+ int block_type, u32 block_size,
+ u8 * const out_begin, u8 *out_next, u32 recent_offsets[])
+{
+ u8 * const block_end = out_next + block_size;
+ u32 min_aligned_offset_slot;
+
+ /*
+ * Build the Huffman decode tables. We always need to build the main
+ * and length decode tables. For aligned blocks we additionally need to
+ * build the aligned offset decode table.
+ */
+
+ if (make_huffman_decode_table(d->maincode_decode_table,
+ d->num_main_syms,
+ LZX_MAINCODE_TABLEBITS,
+ d->maincode_lens,
+ LZX_MAX_MAIN_CODEWORD_LEN,
+ d->maincode_working_space))
+ return -1;
+
+ if (make_huffman_decode_table(d->lencode_decode_table,
+ LZX_LENCODE_NUM_SYMBOLS,
+ LZX_LENCODE_TABLEBITS,
+ d->lencode_lens,
+ LZX_MAX_LEN_CODEWORD_LEN,
+ d->lencode_working_space))
+ return -1;
+
+ if (block_type == LZX_BLOCKTYPE_ALIGNED) {
+ if (make_huffman_decode_table(d->alignedcode_decode_table,
+ LZX_ALIGNEDCODE_NUM_SYMBOLS,
+ LZX_ALIGNEDCODE_TABLEBITS,
+ d->alignedcode_lens,
+ LZX_MAX_ALIGNED_CODEWORD_LEN,
+ d->alignedcode_working_space))
+ return -1;
+ min_aligned_offset_slot = LZX_MIN_ALIGNED_OFFSET_SLOT;
+ memcpy(d->extra_offset_bits, d->extra_offset_bits_minus_aligned,
+ sizeof(lzx_extra_offset_bits));
+ } else {
+ min_aligned_offset_slot = LZX_MAX_OFFSET_SLOTS;
+ memcpy(d->extra_offset_bits, lzx_extra_offset_bits,
+ sizeof(lzx_extra_offset_bits));
+ }
+
+ /* Decode the literals and matches. */
+
+ do {
+ u32 mainsym;
+ u32 length;
+ u32 offset;
+ u32 offset_slot;
+
+ mainsym = read_mainsym(d, is);
+ if (mainsym < LZX_NUM_CHARS) {
+ /* Literal */
+ *out_next++ = mainsym;
+ continue;
+ }
+
+ /* Match */
+
+ /* Decode the length header and offset slot. */
+ STATIC_ASSERT(LZX_NUM_CHARS % LZX_NUM_LEN_HEADERS == 0);
+ length = mainsym % LZX_NUM_LEN_HEADERS;
+ offset_slot = (mainsym - LZX_NUM_CHARS) / LZX_NUM_LEN_HEADERS;
+
+ /* If needed, read a length symbol to decode the full length. */
+ if (length == LZX_NUM_PRIMARY_LENS)
+ length += read_lensym(d, is);
+ length += LZX_MIN_MATCH_LEN;
+
+ if (offset_slot < LZX_NUM_RECENT_OFFSETS) {
+ /* Repeat offset */
+
+ /* Note: This isn't a real LRU queue, since using the R2
+ * offset doesn't bump the R1 offset down to R2.
+ */
+ offset = recent_offsets[offset_slot];
+ recent_offsets[offset_slot] = recent_offsets[0];
+ } else {
+ /* Explicit offset */
+ offset = bitstream_read_bits(is, d->extra_offset_bits[offset_slot]);
+ if (offset_slot >= min_aligned_offset_slot) {
+ offset = (offset << LZX_NUM_ALIGNED_OFFSET_BITS) |
+ read_alignedsym(d, is);
+ }
+ offset += lzx_offset_slot_base[offset_slot];
+
+ /* Update the match offset LRU queue. */
+ STATIC_ASSERT(LZX_NUM_RECENT_OFFSETS == 3);
+ recent_offsets[2] = recent_offsets[1];
+ recent_offsets[1] = recent_offsets[0];
+ }
+ recent_offsets[0] = offset;
+
+ /* Validate the match and copy it to the current position. */
+ if (unlikely(lz_copy(length, offset, out_begin,
+ out_next, block_end, LZX_MIN_MATCH_LEN)))
+ return -1;
+ out_next += length;
+ } while (out_next != block_end);
+
+ return 0;
+}
+
+int
+lzx_decompress(struct lzx_decompressor *__restrict d,
+ const void *__restrict compressed_data, size_t compressed_size,
+ void *__restrict uncompressed_data, size_t uncompressed_size)
+{
+ u8 * const out_begin = uncompressed_data;
+ u8 *out_next = out_begin;
+ u8 * const out_end = out_begin + uncompressed_size;
+ struct input_bitstream is;
+ u32 recent_offsets[LZX_NUM_RECENT_OFFSETS] = {1, 1, 1};
+ u32 may_have_e8_byte = 0;
+
+ STATIC_ASSERT(LZX_NUM_RECENT_OFFSETS == 3);
+
+ init_input_bitstream(&is, compressed_data, compressed_size);
+
+ /* Codeword lengths begin as all 0's for delta encoding purposes. */
+ memset(d->maincode_lens, 0, d->num_main_syms);
+ memset(d->lencode_lens, 0, LZX_LENCODE_NUM_SYMBOLS);
+
+ /* Decompress blocks until we have all the uncompressed data. */
+
+ while (out_next != out_end) {
+ int block_type;
+ u32 block_size;
+
+ if (lzx_read_block_header(d, &is, recent_offsets,
+ &block_type, &block_size))
+ return -1;
+
+ if (block_size < 1 || block_size > out_end - out_next)
+ return -1;
+
+ if (likely(block_type != LZX_BLOCKTYPE_UNCOMPRESSED)) {
+
+ /* Compressed block */
+ if (lzx_decompress_block(d, &is, block_type, block_size,
+ out_begin, out_next,
+ recent_offsets))
+ return -1;
+
+ /* If the first E8 byte was in this block, then it must
+ * have been encoded as a literal using mainsym E8.
+ */
+ may_have_e8_byte |= d->maincode_lens[0xE8];
+ } else {
+
+ /* Uncompressed block */
+ if (bitstream_read_bytes(&is, out_next, block_size))
+ return -1;
+
+ /* Re-align the bitstream if needed. */
+ if (block_size & 1)
+ bitstream_read_byte(&is);
+
+ /* There may have been an E8 byte in the block. */
+ may_have_e8_byte = 1;
+ }
+ out_next += block_size;
+ }
+
+ /* Postprocess the data unless it cannot possibly contain E8 bytes. */
+ if (may_have_e8_byte)
+ lzx_postprocess(uncompressed_data, uncompressed_size);
+
+ return 0;
+}
+
+struct lzx_decompressor *
+lzx_allocate_decompressor(size_t max_block_size)
+{
+ u32 window_order;
+ struct lzx_decompressor *d;
+ u32 offset_slot;
+
+ /*
+ * ntfs uses lzx only as max_block_size == 0x8000
+ * this value certainly will not fail
+ * we can remove lzx_get_window_order + ilog2_ceil + bsrw
+ */
+ WARN_ON(max_block_size != 0x8000);
+
+ window_order = lzx_get_window_order(max_block_size);
+ if (window_order == 0)
+ return ERR_PTR(-EINVAL);
+
+ d = aligned_malloc(sizeof(*d), DECODE_TABLE_ALIGNMENT);
+ if (!d)
+ return NULL;
+
+ d->window_order = window_order;
+ d->num_main_syms = lzx_get_num_main_syms(window_order);
+
+ /* Initialize 'd->extra_offset_bits_minus_aligned'. */
+ STATIC_ASSERT(sizeof(d->extra_offset_bits_minus_aligned) ==
+ sizeof(lzx_extra_offset_bits));
+ STATIC_ASSERT(sizeof(d->extra_offset_bits) ==
+ sizeof(lzx_extra_offset_bits));
+ memcpy(d->extra_offset_bits_minus_aligned, lzx_extra_offset_bits,
+ sizeof(lzx_extra_offset_bits));
+ for (offset_slot = LZX_MIN_ALIGNED_OFFSET_SLOT;
+ offset_slot < LZX_MAX_OFFSET_SLOTS; offset_slot++) {
+ d->extra_offset_bits_minus_aligned[offset_slot] -=
+ LZX_NUM_ALIGNED_OFFSET_BITS;
+ }
+
+ return d;
+}
+
+void
+lzx_free_decompressor(struct lzx_decompressor *d)
+{
+ aligned_free(d);
+}
diff --git a/fs/ntfs3/lib/xpress_constants.h b/fs/ntfs3/lib/xpress_constants.h
new file mode 100644
index 000000000000..c96a03bf4554
--- /dev/null
+++ b/fs/ntfs3/lib/xpress_constants.h
@@ -0,0 +1,23 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * xpress_constants.h
+ *
+ * Constants for the XPRESS compression format.
+ */
+
+#ifndef _XPRESS_CONSTANTS_H
+#define _XPRESS_CONSTANTS_H
+
+#define XPRESS_NUM_CHARS 256
+#define XPRESS_NUM_SYMBOLS 512
+#define XPRESS_MAX_CODEWORD_LEN 15
+
+#define XPRESS_END_OF_DATA 256
+
+#define XPRESS_MIN_OFFSET 1
+#define XPRESS_MAX_OFFSET 65535
+
+#define XPRESS_MIN_MATCH_LEN 3
+#define XPRESS_MAX_MATCH_LEN 65538
+
+#endif /* _XPRESS_CONSTANTS_H */
diff --git a/fs/ntfs3/lib/xpress_decompress.c b/fs/ntfs3/lib/xpress_decompress.c
new file mode 100644
index 000000000000..af87a4a91852
--- /dev/null
+++ b/fs/ntfs3/lib/xpress_decompress.c
@@ -0,0 +1,165 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * xpress_decompress.c
+ *
+ * A decompressor for the XPRESS compression format (Huffman variant).
+ */
+
+/*
+ *
+ * Copyright (C) 2012-2016 Eric Biggers
+ *
+ * This program is free software: you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License as published by the Free Software
+ * Foundation, either version 2 of the License, or (at your option) any later
+ * version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more
+ * details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+/*
+ * The XPRESS compression format is an LZ77 and Huffman-code based algorithm.
+ * That means it is fairly similar to LZX compression, but XPRESS is simpler, so
+ * it is a little faster to compress and decompress.
+ *
+ * The XPRESS compression format is mostly documented in a file called "[MS-XCA]
+ * Xpress Compression Algorithm". In the MSDN library, it can currently be
+ * found under Open Specifications => Protocols => Windows Protocols => Windows
+ * Server Protocols => [MS-XCA] Xpress Compression Algorithm". The format in
+ * WIMs is specifically the algorithm labeled as the "LZ77+Huffman Algorithm"
+ * (there apparently are some other versions of XPRESS as well).
+ *
+ * If you are already familiar with the LZ77 algorithm and Huffman coding, the
+ * XPRESS format is fairly simple. The compressed data begins with 256 bytes
+ * that contain 512 4-bit integers that are the lengths of the symbols in the
+ * Huffman code used for match/literal headers. In contrast with more
+ * complicated formats such as DEFLATE and LZX, this is the only Huffman code
+ * that is used for the entirety of the XPRESS compressed data, and the codeword
+ * lengths are not encoded with a pretree.
+ *
+ * The rest of the compressed data is Huffman-encoded symbols. Values 0 through
+ * 255 represent the corresponding literal bytes. Values 256 through 511
+ * represent matches and may require extra bits or bytes to be read to get the
+ * match offset and match length.
+ *
+ * The trickiest part is probably the way in which literal bytes for match
+ * lengths are interleaved in the bitstream.
+ *
+ * Also, a caveat--- according to Microsoft's documentation for XPRESS,
+ *
+ * "Some implementation of the decompression algorithm expect an extra
+ * symbol to mark the end of the data. Specifically, some implementations
+ * fail during decompression if the Huffman symbol 256 is not found after
+ * the actual data."
+ *
+ * This is the case with Microsoft's implementation in WIMGAPI, for example. So
+ * although our implementation doesn't currently check for this extra symbol,
+ * compressors would be wise to add it.
+ */
+
+#include "decompress_common.h"
+#include "xpress_constants.h"
+
+/* This value is chosen for fast decompression. */
+#define XPRESS_TABLEBITS 11
+
+struct xpress_decompressor {
+ union {
+ DECODE_TABLE(decode_table, XPRESS_NUM_SYMBOLS,
+ XPRESS_TABLEBITS, XPRESS_MAX_CODEWORD_LEN);
+ u8 lens[XPRESS_NUM_SYMBOLS];
+ };
+ DECODE_TABLE_WORKING_SPACE(working_space, XPRESS_NUM_SYMBOLS,
+ XPRESS_MAX_CODEWORD_LEN);
+} _aligned_attribute(DECODE_TABLE_ALIGNMENT);
+
+int
+xpress_decompress(struct xpress_decompressor *__restrict d,
+ const void *__restrict compressed_data, size_t compressed_size,
+ void *__restrict uncompressed_data, size_t uncompressed_size)
+{
+ const u8 * const in_begin = compressed_data;
+ u8 * const out_begin = uncompressed_data;
+ u8 *out_next = out_begin;
+ u8 * const out_end = out_begin + uncompressed_size;
+ struct input_bitstream is;
+ int i;
+
+ /* Read the Huffman codeword lengths. */
+ if (compressed_size < XPRESS_NUM_SYMBOLS / 2)
+ return -1;
+ for (i = 0; i < XPRESS_NUM_SYMBOLS / 2; i++) {
+ d->lens[2 * i + 0] = in_begin[i] & 0xf;
+ d->lens[2 * i + 1] = in_begin[i] >> 4;
+ }
+
+ /* Build a decoding table for the Huffman code. */
+ if (make_huffman_decode_table(d->decode_table, XPRESS_NUM_SYMBOLS,
+ XPRESS_TABLEBITS, d->lens,
+ XPRESS_MAX_CODEWORD_LEN,
+ d->working_space))
+ return -1;
+
+ /* Decode the matches and literals. */
+
+ init_input_bitstream(&is, in_begin + XPRESS_NUM_SYMBOLS / 2,
+ compressed_size - XPRESS_NUM_SYMBOLS / 2);
+
+ while (out_next != out_end) {
+ u32 sym;
+ u32 log2_offset;
+ u32 length;
+ u32 offset;
+
+ sym = read_huffsym(&is, d->decode_table,
+ XPRESS_TABLEBITS, XPRESS_MAX_CODEWORD_LEN);
+ if (sym < XPRESS_NUM_CHARS) {
+ /* Literal */
+ *out_next++ = sym;
+ } else {
+ /* Match */
+ length = sym & 0xf;
+ log2_offset = (sym >> 4) & 0xf;
+
+ bitstream_ensure_bits(&is, 16);
+
+ offset = ((u32)1 << log2_offset) |
+ bitstream_pop_bits(&is, log2_offset);
+
+ if (length == 0xf) {
+ length += bitstream_read_byte(&is);
+ if (length == 0xf + 0xff)
+ length = bitstream_read_u16(&is);
+ }
+ length += XPRESS_MIN_MATCH_LEN;
+
+ if (unlikely(lz_copy(length, offset,
+ out_begin, out_next, out_end,
+ XPRESS_MIN_MATCH_LEN)))
+ return -1;
+
+ out_next += length;
+ }
+ }
+ return 0;
+}
+
+struct xpress_decompressor *
+xpress_allocate_decompressor(void)
+{
+ return aligned_malloc(sizeof(struct xpress_decompressor),
+ DECODE_TABLE_ALIGNMENT);
+}
+
+void
+xpress_free_decompressor(struct xpress_decompressor *d)
+{
+ aligned_free(d);
+}
diff --git a/fs/ntfs3/lznt.c b/fs/ntfs3/lznt.c
new file mode 100644
index 000000000000..edba953b754a
--- /dev/null
+++ b/fs/ntfs3/lznt.c
@@ -0,0 +1,452 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ *
+ * Copyright (C) 2019-2020 Paragon Software GmbH, All rights reserved.
+ *
+ */
+#include <linux/blkdev.h>
+#include <linux/buffer_head.h>
+#include <linux/fs.h>
+#include <linux/nls.h>
+
+#include "debug.h"
+#include "ntfs.h"
+#include "ntfs_fs.h"
+
+// clang-format off
+/* src buffer is zero */
+#define LZNT_ERROR_ALL_ZEROS 1
+#define LZNT_CHUNK_SIZE 0x1000
+// clang-format on
+
+struct lznt_hash {
+ const u8 *p1;
+ const u8 *p2;
+};
+
+struct lznt {
+ const u8 *unc;
+ const u8 *unc_end;
+ const u8 *best_match;
+ size_t max_len;
+ bool std;
+
+ struct lznt_hash hash[LZNT_CHUNK_SIZE];
+};
+
+static inline size_t get_match_len(const u8 *ptr, const u8 *end, const u8 *prev,
+ size_t max_len)
+{
+ size_t len = 0;
+
+ while (ptr + len < end && ptr[len] == prev[len] && ++len < max_len)
+ ;
+ return len;
+}
+
+static size_t longest_match_std(const u8 *src, struct lznt *ctx)
+{
+ size_t hash_index;
+ size_t len1 = 0, len2 = 0;
+ const u8 **hash;
+
+ hash_index =
+ ((40543U * ((((src[0] << 4) ^ src[1]) << 4) ^ src[2])) >> 4) &
+ (LZNT_CHUNK_SIZE - 1);
+
+ hash = &(ctx->hash[hash_index].p1);
+
+ if (hash[0] >= ctx->unc && hash[0] < src && hash[0][0] == src[0] &&
+ hash[0][1] == src[1] && hash[0][2] == src[2]) {
+ len1 = 3;
+ if (ctx->max_len > 3)
+ len1 += get_match_len(src + 3, ctx->unc_end,
+ hash[0] + 3, ctx->max_len - 3);
+ }
+
+ if (hash[1] >= ctx->unc && hash[1] < src && hash[1][0] == src[0] &&
+ hash[1][1] == src[1] && hash[1][2] == src[2]) {
+ len2 = 3;
+ if (ctx->max_len > 3)
+ len2 += get_match_len(src + 3, ctx->unc_end,
+ hash[1] + 3, ctx->max_len - 3);
+ }
+
+ /* Compare two matches and select the best one */
+ if (len1 < len2) {
+ ctx->best_match = hash[1];
+ len1 = len2;
+ } else {
+ ctx->best_match = hash[0];
+ }
+
+ hash[1] = hash[0];
+ hash[0] = src;
+ return len1;
+}
+
+static size_t longest_match_best(const u8 *src, struct lznt *ctx)
+{
+ size_t max_len;
+ const u8 *ptr;
+
+ if (ctx->unc >= src || !ctx->max_len)
+ return 0;
+
+ max_len = 0;
+ for (ptr = ctx->unc; ptr < src; ++ptr) {
+ size_t len =
+ get_match_len(src, ctx->unc_end, ptr, ctx->max_len);
+ if (len >= max_len) {
+ max_len = len;
+ ctx->best_match = ptr;
+ }
+ }
+
+ return max_len >= 3 ? max_len : 0;
+}
+
+static const size_t s_max_len[] = {
+ 0x1002, 0x802, 0x402, 0x202, 0x102, 0x82, 0x42, 0x22, 0x12,
+};
+
+static const size_t s_max_off[] = {
+ 0x10, 0x20, 0x40, 0x80, 0x100, 0x200, 0x400, 0x800, 0x1000,
+};
+
+static inline u16 make_pair(size_t offset, size_t len, size_t index)
+{
+ return ((offset - 1) << (12 - index)) |
+ ((len - 3) & (((1 << (12 - index)) - 1)));
+}
+
+static inline size_t parse_pair(u16 pair, size_t *offset, size_t index)
+{
+ *offset = 1 + (pair >> (12 - index));
+ return 3 + (pair & ((1 << (12 - index)) - 1));
+}
+
+/*
+ * compress_chunk
+ *
+ * returns one of the three values:
+ * 0 - ok, 'cmpr' contains 'cmpr_chunk_size' bytes of compressed data
+ * 1 - input buffer is full zero
+ * -2 - the compressed buffer is too small to hold the compressed data
+ */
+static inline int compress_chunk(size_t (*match)(const u8 *, struct lznt *),
+ const u8 *unc, const u8 *unc_end, u8 *cmpr,
+ u8 *cmpr_end, size_t *cmpr_chunk_size,
+ struct lznt *ctx)
+{
+ size_t cnt = 0;
+ size_t idx = 0;
+ const u8 *up = unc;
+ u8 *cp = cmpr + 3;
+ u8 *cp2 = cmpr + 2;
+ u8 not_zero = 0;
+ /* Control byte of 8-bit values: ( 0 - means byte as is, 1 - short pair ) */
+ u8 ohdr = 0;
+ u8 *last;
+ u16 t16;
+
+ if (unc + LZNT_CHUNK_SIZE < unc_end)
+ unc_end = unc + LZNT_CHUNK_SIZE;
+
+ last = min(cmpr + LZNT_CHUNK_SIZE + sizeof(short), cmpr_end);
+
+ ctx->unc = unc;
+ ctx->unc_end = unc_end;
+ ctx->max_len = s_max_len[0];
+
+ while (up < unc_end) {
+ size_t max_len;
+
+ while (unc + s_max_off[idx] < up)
+ ctx->max_len = s_max_len[++idx];
+
+ // Find match
+ max_len = up + 3 <= unc_end ? (*match)(up, ctx) : 0;
+
+ if (!max_len) {
+ if (cp >= last)
+ goto NotCompressed;
+ not_zero |= *cp++ = *up++;
+ } else if (cp + 1 >= last) {
+ goto NotCompressed;
+ } else {
+ t16 = make_pair(up - ctx->best_match, max_len, idx);
+ *cp++ = t16;
+ *cp++ = t16 >> 8;
+
+ ohdr |= 1 << cnt;
+ up += max_len;
+ }
+
+ cnt = (cnt + 1) & 7;
+ if (!cnt) {
+ *cp2 = ohdr;
+ ohdr = 0;
+ cp2 = cp;
+ cp += 1;
+ }
+ }
+
+ if (cp2 < last)
+ *cp2 = ohdr;
+ else
+ cp -= 1;
+
+ *cmpr_chunk_size = cp - cmpr;
+
+ t16 = (*cmpr_chunk_size - 3) | 0xB000;
+ cmpr[0] = t16;
+ cmpr[1] = t16 >> 8;
+
+ return not_zero ? 0 : LZNT_ERROR_ALL_ZEROS;
+
+NotCompressed:
+
+ if ((cmpr + LZNT_CHUNK_SIZE + sizeof(short)) > last)
+ return -2;
+
+ /*
+ * Copy non cmpr data
+ * 0x3FFF == ((LZNT_CHUNK_SIZE + 2 - 3) | 0x3000)
+ */
+ cmpr[0] = 0xff;
+ cmpr[1] = 0x3f;
+
+ memcpy(cmpr + sizeof(short), unc, LZNT_CHUNK_SIZE);
+ *cmpr_chunk_size = LZNT_CHUNK_SIZE + sizeof(short);
+
+ return 0;
+}
+
+static inline ssize_t decompress_chunk(u8 *unc, u8 *unc_end, const u8 *cmpr,
+ const u8 *cmpr_end)
+{
+ u8 *up = unc;
+ u8 ch = *cmpr++;
+ size_t bit = 0;
+ size_t index = 0;
+ u16 pair;
+ size_t offset, length;
+
+ /* Do decompression until pointers are inside range */
+ while (up < unc_end && cmpr < cmpr_end) {
+ /* Correct index */
+ while (unc + s_max_off[index] < up)
+ index += 1;
+
+ /* Check the current flag for zero */
+ if (!(ch & (1 << bit))) {
+ /* Just copy byte */
+ *up++ = *cmpr++;
+ goto next;
+ }
+
+ /* Check for boundary */
+ if (cmpr + 1 >= cmpr_end)
+ return -EINVAL;
+
+ /* Read a short from little endian stream */
+ pair = cmpr[1];
+ pair <<= 8;
+ pair |= cmpr[0];
+
+ cmpr += 2;
+
+ /* Translate packed information into offset and length */
+ length = parse_pair(pair, &offset, index);
+
+ /* Check offset for boundary */
+ if (unc + offset > up)
+ return -EINVAL;
+
+ /* Truncate the length if necessary */
+ if (up + length >= unc_end)
+ length = unc_end - up;
+
+ /* Now we copy bytes. This is the heart of LZ algorithm. */
+ for (; length > 0; length--, up++)
+ *up = *(up - offset);
+
+next:
+ /* Advance flag bit value */
+ bit = (bit + 1) & 7;
+
+ if (!bit) {
+ if (cmpr >= cmpr_end)
+ break;
+
+ ch = *cmpr++;
+ }
+ }
+
+ /* return the size of uncompressed data */
+ return up - unc;
+}
+
+/*
+ * 0 - standard compression
+ * !0 - best compression, requires a lot of cpu
+ */
+struct lznt *get_lznt_ctx(int level)
+{
+ struct lznt *r = ntfs_alloc(
+ level ? offsetof(struct lznt, hash) : sizeof(struct lznt), 1);
+
+ if (r)
+ r->std = !level;
+ return r;
+}
+
+/*
+ * compress_lznt
+ *
+ * Compresses "unc" into "cmpr"
+ * +x - ok, 'cmpr' contains 'final_compressed_size' bytes of compressed data
+ * 0 - input buffer is full zero
+ */
+size_t compress_lznt(const void *unc, size_t unc_size, void *cmpr,
+ size_t cmpr_size, struct lznt *ctx)
+{
+ int err;
+ size_t (*match)(const u8 *src, struct lznt *ctx);
+ u8 *p = cmpr;
+ u8 *end = p + cmpr_size;
+ const u8 *unc_chunk = unc;
+ const u8 *unc_end = unc_chunk + unc_size;
+ bool is_zero = true;
+
+ if (ctx->std) {
+ match = &longest_match_std;
+ memset(ctx->hash, 0, sizeof(ctx->hash));
+ } else {
+ match = &longest_match_best;
+ }
+
+ /* compression cycle */
+ for (; unc_chunk < unc_end; unc_chunk += LZNT_CHUNK_SIZE) {
+ cmpr_size = 0;
+ err = compress_chunk(match, unc_chunk, unc_end, p, end,
+ &cmpr_size, ctx);
+ if (err < 0)
+ return unc_size;
+
+ if (is_zero && err != LZNT_ERROR_ALL_ZEROS)
+ is_zero = false;
+
+ p += cmpr_size;
+ }
+
+ if (p <= end - 2)
+ p[0] = p[1] = 0;
+
+ return is_zero ? 0 : PtrOffset(cmpr, p);
+}
+
+/*
+ * decompress_lznt
+ *
+ * decompresses "cmpr" into "unc"
+ */
+ssize_t decompress_lznt(const void *cmpr, size_t cmpr_size, void *unc,
+ size_t unc_size)
+{
+ const u8 *cmpr_chunk = cmpr;
+ const u8 *cmpr_end = cmpr_chunk + cmpr_size;
+ u8 *unc_chunk = unc;
+ u8 *unc_end = unc_chunk + unc_size;
+ u16 chunk_hdr;
+
+ if (cmpr_size < sizeof(short))
+ return -EINVAL;
+
+ /* read chunk header */
+ chunk_hdr = cmpr_chunk[1];
+ chunk_hdr <<= 8;
+ chunk_hdr |= cmpr_chunk[0];
+
+ /* loop through decompressing chunks */
+ for (;;) {
+ size_t chunk_size_saved;
+ size_t unc_use;
+ size_t cmpr_use = 3 + (chunk_hdr & (LZNT_CHUNK_SIZE - 1));
+
+ /* Check that the chunk actually fits the supplied buffer */
+ if (cmpr_chunk + cmpr_use > cmpr_end)
+ return -EINVAL;
+
+ /* First make sure the chunk contains compressed data */
+ if (chunk_hdr & 0x8000) {
+ /* Decompress a chunk and return if we get an error */
+ ssize_t err =
+ decompress_chunk(unc_chunk, unc_end,
+ cmpr_chunk + sizeof(chunk_hdr),
+ cmpr_chunk + cmpr_use);
+ if (err < 0)
+ return err;
+ unc_use = err;
+ } else {
+ /* This chunk does not contain compressed data */
+ unc_use = unc_chunk + LZNT_CHUNK_SIZE > unc_end ?
+ unc_end - unc_chunk :
+ LZNT_CHUNK_SIZE;
+
+ if (cmpr_chunk + sizeof(chunk_hdr) + unc_use >
+ cmpr_end) {
+ return -EINVAL;
+ }
+
+ memcpy(unc_chunk, cmpr_chunk + sizeof(chunk_hdr),
+ unc_use);
+ }
+
+ /* Advance pointers */
+ cmpr_chunk += cmpr_use;
+ unc_chunk += unc_use;
+
+ /* Check for the end of unc buffer */
+ if (unc_chunk >= unc_end)
+ break;
+
+ /* Proceed the next chunk */
+ if (cmpr_chunk > cmpr_end - 2)
+ break;
+
+ chunk_size_saved = LZNT_CHUNK_SIZE;
+
+ /* read chunk header */
+ chunk_hdr = cmpr_chunk[1];
+ chunk_hdr <<= 8;
+ chunk_hdr |= cmpr_chunk[0];
+
+ if (!chunk_hdr)
+ break;
+
+ /* Check the size of unc buffer */
+ if (unc_use < chunk_size_saved) {
+ size_t t1 = chunk_size_saved - unc_use;
+ u8 *t2 = unc_chunk + t1;
+
+ /* 'Zero' memory */
+ if (t2 >= unc_end)
+ break;
+
+ memset(unc_chunk, 0, t1);
+ unc_chunk = t2;
+ }
+ }
+
+ /* Check compression boundary */
+ if (cmpr_chunk > cmpr_end)
+ return -EINVAL;
+
+ /*
+ * The unc size is just a difference between current
+ * pointer and original one
+ */
+ return PtrOffset(unc, unc_chunk);
+}
--
2.25.4
Powered by blists - more mailing lists