| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201205004057.1712753-1-linus.walleij@linaro.org>
Date: Sat, 5 Dec 2020 01:40:56 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>
Cc: linux-kernel@...r.kernel.org,
Linus Walleij <linus.walleij@...aro.org>,
Lee Jones <lee.jones@...aro.org>
Subject: [PATCH 1/2 v2] regulator: ab8500: Remove unused platform data
The struct ab8500_regulator_platform_data was a leftover
since the days before we probed all regulators from the
device tree. The ab8500-ext regulator was the only used,
defining platform data and register intialization that
was never used for anything, a copy of a boardfile no
longer in use.
Delete the ab8500_regulator_platform_data and make the
ab8500-ext regulator reference the regulator init data
in the local file directly. We are 100% device tree
these days.
Cc: Lee Jones <lee.jones@...aro.org>
Signed-off-by: Linus Walleij <linus.walleij@...aro.org>
---
ChangeLog v1->v2:
- No changes.
- Resend with the other patch.
Lee: would be nice if you could ACK this, I do not plan
any other changes to the AB8500 headers for this kernel
cycle so there should not be any conflicts.
---
drivers/regulator/ab8500-ext.c | 417 +-----------------------------
include/linux/mfd/abx500/ab8500.h | 3 -
include/linux/regulator/ab8500.h | 10 -
3 files changed, 2 insertions(+), 428 deletions(-)
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 8bb43a671ded..05f9531bd108 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -24,403 +24,6 @@
#include <linux/mfd/abx500/ab8500.h>
#include <linux/regulator/ab8500.h>
-static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
- /* Main display, u8500 R3 uib */
- REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
- /* Main display, u8500 uib and ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
- /* Secondary display, ST uib */
- REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
- /* SFH7741 proximity sensor */
- REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
- /* BH1780GLS ambient light sensor */
- REGULATOR_SUPPLY("vcc", "2-0029"),
- /* lsm303dlh accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0018"),
- /* lsm303dlhc accelerometer */
- REGULATOR_SUPPLY("vdd", "2-0019"),
- /* lsm303dlh magnetometer */
- REGULATOR_SUPPLY("vdd", "2-001e"),
- /* Rohm BU21013 Touchscreen devices */
- REGULATOR_SUPPLY("avdd", "3-005c"),
- REGULATOR_SUPPLY("avdd", "3-005d"),
- /* Synaptics RMI4 Touchscreen device */
- REGULATOR_SUPPLY("vdd", "3-004b"),
- /* L3G4200D Gyroscope device */
- REGULATOR_SUPPLY("vdd", "2-0068"),
- /* Ambient light sensor device */
- REGULATOR_SUPPLY("vdd", "3-0029"),
- /* Pressure sensor device */
- REGULATOR_SUPPLY("vdd", "2-005c"),
- /* Cypress TrueTouch Touchscreen device */
- REGULATOR_SUPPLY("vcpin", "spi8.0"),
- /* Camera device */
- REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
- /* On-board eMMC power */
- REGULATOR_SUPPLY("vmmc", "sdi4"),
- /* AB8500 audio codec */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
- /* AB8500 accessory detect 1 */
- REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
- /* AV8100 HDMI device */
- REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
- REGULATOR_SUPPLY("v-SD-STM", "stm"),
- /* External MMC slot power */
- REGULATOR_SUPPLY("vmmc", "sdi0"),
-};
-
-static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
- /* TV-out DENC supply */
- REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
- /* Internal general-purpose ADC */
- REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
- /* ADC for charger */
- REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
- /* AB8500 Tv-out device */
- REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
-};
-
-static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
- /* AB8500 audio-codec main supply */
- REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
- /* AB8500 audio-codec Mic1 supply */
- REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
- /* AB8500 audio-codec Mic2 supply */
- REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
- /* AB8500 audio-codec DMic supply */
- REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
- /* SoC core supply, no device */
- REGULATOR_SUPPLY("v-intcore", NULL),
- /* USB Transceiver */
- REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
- /* Handled by abx500 clk driver */
- REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vana_consumers[] = {
- /* DB8500 DSI */
- REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
- REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
- /* DB8500 CSI */
- REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
-};
-
-/* ab8500 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
- /*
- * VanaRequestCtrl = HP/LP depending on VxRequest
- * VextSupply1RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2, 0xf0, 0x00),
- /*
- * VextSupply2RequestCtrl = HP/LP depending on VxRequest
- * VextSupply3RequestCtrl = HP/LP depending on VxRequest
- * Vaux1RequestCtrl = HP/LP depending on VxRequest
- * Vaux2RequestCtrl = HP/LP depending on VxRequest
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3, 0xff, 0x00),
- /*
- * Vaux3RequestCtrl = HP/LP depending on VxRequest
- * SwHPReq = Control through SWValid disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4, 0x07, 0x00),
- /*
- * VanaSysClkReq1HPValid = disabled
- * Vaux1SysClkReq1HPValid = disabled
- * Vaux2SysClkReq1HPValid = disabled
- * Vaux3SysClkReq1HPValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
- /*
- * VextSupply1SysClkReq1HPValid = disabled
- * VextSupply2SysClkReq1HPValid = disabled
- * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
- /*
- * VanaHwHPReq1Valid = disabled
- * Vaux1HwHPreq1Valid = disabled
- * Vaux2HwHPReq1Valid = disabled
- * Vaux3HwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq1Valid = disabled
- * VextSupply2HwHPReq1Valid = disabled
- * VextSupply3HwHPReq1Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2, 0x07, 0x00),
- /*
- * VanaHwHPReq2Valid = disabled
- * Vaux1HwHPReq2Valid = disabled
- * Vaux2HwHPReq2Valid = disabled
- * Vaux3HwHPReq2Valid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1, 0xe8, 0x00),
- /*
- * VextSupply1HwHPReq2Valid = disabled
- * VextSupply2HwHPReq2Valid = disabled
- * VextSupply3HwHPReq2Valid = HWReq2 controlled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2, 0x07, 0x04),
- /*
- * VanaSwHPReqValid = disabled
- * Vaux1SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1, 0xa0, 0x00),
- /*
- * Vaux2SwHPReqValid = disabled
- * Vaux3SwHPReqValid = disabled
- * VextSupply1SwHPReqValid = disabled
- * VextSupply2SwHPReqValid = disabled
- * VextSupply3SwHPReqValid = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2, 0x1f, 0x00),
- /*
- * SysClkReq2Valid1 = SysClkReq2 controlled
- * SysClkReq3Valid1 = disabled
- * SysClkReq4Valid1 = SysClkReq4 controlled
- * SysClkReq5Valid1 = disabled
- * SysClkReq6Valid1 = SysClkReq6 controlled
- * SysClkReq7Valid1 = disabled
- * SysClkReq8Valid1 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1, 0xfe, 0x2a),
- /*
- * SysClkReq2Valid2 = disabled
- * SysClkReq3Valid2 = disabled
- * SysClkReq4Valid2 = disabled
- * SysClkReq5Valid2 = disabled
- * SysClkReq6Valid2 = SysClkReq6 controlled
- * SysClkReq7Valid2 = disabled
- * SysClkReq8Valid2 = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2, 0xfe, 0x20),
- /*
- * VTVoutEna = disabled
- * Vintcore12Ena = disabled
- * Vintcore12Sel = 1.25 V
- * Vintcore12LP = inactive (HP)
- * VTVoutLP = inactive (HP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUMISC1, 0xfe, 0x10),
- /*
- * VaudioEna = disabled
- * VdmicEna = disabled
- * Vamic1Ena = disabled
- * Vamic2Ena = disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY, 0x1e, 0x00),
- /*
- * Vamic1_dzout = high-Z when Vamic1 is disabled
- * Vamic2_dzout = high-Z when Vamic2 is disabled
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC, 0x03, 0x00),
- /*
- * VPll = Hw controlled (NOTE! PRCMU bits)
- * VanaRegu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU, 0x0f, 0x02),
- /*
- * VrefDDREna = disabled
- * VrefDDRSleepMode = inactive (no pulldown)
- */
- INIT_REGULATOR_REGISTER(AB8500_VREFDDR, 0x03, 0x00),
- /*
- * VextSupply1Regu = force LP
- * VextSupply2Regu = force OFF
- * VextSupply3Regu = force HP (-> STBB2=LP and TPS=LP)
- * ExtSupply2Bypass = ExtSupply12LPn ball is 0 when Ena is 0
- * ExtSupply3Bypass = ExtSupply3LPn ball is 0 when Ena is 0
- */
- INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU, 0xff, 0x13),
- /*
- * Vaux1Regu = force HP
- * Vaux2Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU, 0x0f, 0x01),
- /*
- * Vaux3Regu = force off
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU, 0x03, 0x00),
- /*
- * Vaux1Sel = 2.8 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL, 0x0f, 0x0C),
- /*
- * Vaux2Sel = 2.9 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL, 0x0f, 0x0d),
- /*
- * Vaux3Sel = 2.91 V
- */
- INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL, 0x07, 0x07),
- /*
- * VextSupply12LP = disabled (no LP)
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE, 0x01, 0x00),
- /*
- * Vaux1Disch = short discharge time
- * Vaux2Disch = short discharge time
- * Vaux3Disch = short discharge time
- * Vintcore12Disch = short discharge time
- * VTVoutDisch = short discharge time
- * VaudioDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH, 0xfc, 0x00),
- /*
- * VanaDisch = short discharge time
- * VdmicPullDownEna = pulldown disabled when Vdmic is disabled
- * VdmicDisch = short discharge time
- */
- INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2, 0x16, 0x00),
-};
-
-/* AB8500 regulators */
-static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
- /* supplies to the display/camera */
- [AB8500_LDO_AUX1] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-DISPLAY",
- .min_uV = 2800000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS,
- .boot_on = 1, /* display is on at boot */
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
- .consumer_supplies = ab8500_vaux1_consumers,
- },
- /* supplies to the on-board eMMC */
- [AB8500_LDO_AUX2] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-eMMC1",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
- .consumer_supplies = ab8500_vaux2_consumers,
- },
- /* supply for VAUX3, supplies to SDcard slots */
- [AB8500_LDO_AUX3] = {
- .supply_regulator = "ab8500-ext-supply3",
- .constraints = {
- .name = "V-MMC-SD",
- .min_uV = 1100000,
- .max_uV = 3300000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
- .consumer_supplies = ab8500_vaux3_consumers,
- },
- /* supply for tvout, gpadc, TVOUT LDO */
- [AB8500_LDO_TVOUT] = {
- .constraints = {
- .name = "V-TVOUT",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
- .consumer_supplies = ab8500_vtvout_consumers,
- },
- /* supply for ab8500-vaudio, VAUDIO LDO */
- [AB8500_LDO_AUDIO] = {
- .constraints = {
- .name = "V-AUD",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
- .consumer_supplies = ab8500_vaud_consumers,
- },
- /* supply for v-anamic1 VAMic1-LDO */
- [AB8500_LDO_ANAMIC1] = {
- .constraints = {
- .name = "V-AMIC1",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
- .consumer_supplies = ab8500_vamic1_consumers,
- },
- /* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
- [AB8500_LDO_ANAMIC2] = {
- .constraints = {
- .name = "V-AMIC2",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
- .consumer_supplies = ab8500_vamic2_consumers,
- },
- /* supply for v-dmic, VDMIC LDO */
- [AB8500_LDO_DMIC] = {
- .constraints = {
- .name = "V-DMIC",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
- .consumer_supplies = ab8500_vdmic_consumers,
- },
- /* supply for v-intcore12, VINTCORE12 LDO */
- [AB8500_LDO_INTCORE] = {
- .constraints = {
- .name = "V-INTCORE",
- .min_uV = 1250000,
- .max_uV = 1350000,
- .input_uV = 1800000,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
- REGULATOR_CHANGE_STATUS |
- REGULATOR_CHANGE_MODE |
- REGULATOR_CHANGE_DRMS,
- .valid_modes_mask = REGULATOR_MODE_NORMAL |
- REGULATOR_MODE_IDLE,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
- .consumer_supplies = ab8500_vintcore_consumers,
- },
- /* supply for U8500 CSI-DSI, VANA LDO */
- [AB8500_LDO_ANA] = {
- .constraints = {
- .name = "V-CSI-DSI",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
- .consumer_supplies = ab8500_vana_consumers,
- },
-};
-
/* supply for VextSupply3 */
static struct regulator_consumer_supply ab8500_ext_supply3_consumers[] = {
/* SIM supply for 3 V SIM cards */
@@ -465,15 +68,6 @@ static struct regulator_init_data ab8500_ext_regulators[] = {
},
};
-static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
- .reg_init = ab8500_reg_init,
- .num_reg_init = ARRAY_SIZE(ab8500_reg_init),
- .regulator = ab8500_regulators,
- .num_regulator = ARRAY_SIZE(ab8500_regulators),
- .ext_regulator = ab8500_ext_regulators,
- .num_ext_regulator = ARRAY_SIZE(ab8500_ext_regulators),
-};
-
/**
* struct ab8500_ext_regulator_info - ab8500 regulator information
* @dev: device pointer
@@ -788,7 +382,6 @@ static struct ab8500_ext_regulator_info
static int ab8500_ext_regulator_probe(struct platform_device *pdev)
{
struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
- struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data;
struct regulator_config config = { };
struct regulator_dev *rdev;
int i;
@@ -798,12 +391,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
return -EINVAL;
}
- /* make sure the platform data has the correct size */
- if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
- dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
- return -EINVAL;
- }
-
/* check for AB8500 2.x */
if (is_ab8500_2p0_or_earlier(ab8500)) {
struct ab8500_ext_regulator_info *info;
@@ -823,11 +410,11 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
info = &ab8500_ext_regulator_info[i];
info->dev = &pdev->dev;
info->cfg = (struct ab8500_ext_regulator_cfg *)
- pdata->ext_regulator[i].driver_data;
+ ab8500_ext_regulators[i].driver_data;
config.dev = &pdev->dev;
config.driver_data = info;
- config.init_data = &pdata->ext_regulator[i];
+ config.init_data = &ab8500_ext_regulators[i];
/* register regulator with framework */
rdev = devm_regulator_register(&pdev->dev, &info->desc,
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 524a7e4702c2..302a330c5c84 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -368,7 +368,6 @@ struct ab8500 {
int it_latchhier_num;
};
-struct ab8500_regulator_platform_data;
struct ab8500_codec_platform_data;
struct ab8500_sysctrl_platform_data;
@@ -376,11 +375,9 @@ struct ab8500_sysctrl_platform_data;
* struct ab8500_platform_data - AB8500 platform data
* @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
* @init: board-specific initialization after detection of ab8500
- * @regulator: machine-specific constraints for regulators
*/
struct ab8500_platform_data {
void (*init) (struct ab8500 *);
- struct ab8500_regulator_platform_data *regulator;
struct ab8500_codec_platform_data *codec;
struct ab8500_sysctrl_platform_data *sysctrl;
};
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
index 3ab1ddf151a2..ecf7b4713df9 100644
--- a/include/linux/regulator/ab8500.h
+++ b/include/linux/regulator/ab8500.h
@@ -153,14 +153,4 @@ enum ab8500_ext_regulator_id {
AB8500_NUM_EXT_REGULATORS,
};
-/* AB8500 regulator platform data */
-struct ab8500_regulator_platform_data {
- int num_reg_init;
- struct ab8500_regulator_reg_init *reg_init;
- int num_regulator;
- struct regulator_init_data *regulator;
- int num_ext_regulator;
- struct regulator_init_data *ext_regulator;
-};
-
#endif
--
2.26.2
Powered by blists - more mailing lists