lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201207095346.26297-3-jbrunet@baylibre.com>
Date:   Mon,  7 Dec 2020 10:53:46 +0100
From:   Jerome Brunet <jbrunet@...libre.com>
To:     Kevin Hilman <khilman@...libre.com>
Cc:     Jerome Brunet <jbrunet@...libre.com>,
        linux-amlogic@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] arm64: dts: meson: vim3: enable hdmi audio loopback

Enable audio capture frontends and a tdm decoder.
This makes it possible to loopback the audio played on the hdmi codec,
which is the only output interface at the moment.

Of course, one TODDR device would be enough to do that but since
the 3 FRDDRs are enabled on the playback side, let's do the same on the
capture side.

Signed-off-by: Jerome Brunet <jbrunet@...libre.com>
---
 .../boot/dts/amlogic/meson-khadas-vim3.dtsi   | 41 +++++++++++++++++--
 1 file changed, 37 insertions(+), 4 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
index 12465c4becc7..4cf2c193d168 100644
--- a/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-khadas-vim3.dtsi
@@ -166,11 +166,16 @@ hdmi_connector_in: endpoint {
 	sound {
 		compatible = "amlogic,axg-sound-card";
 		model = "G12B-KHADAS-VIM3";
-		audio-aux-devs = <&tdmout_a>;
+		audio-aux-devs = <&tdmin_a>, <&tdmout_a>;
 		audio-routing = "TDMOUT_A IN 0", "FRDDR_A OUT 0",
 				"TDMOUT_A IN 1", "FRDDR_B OUT 0",
 				"TDMOUT_A IN 2", "FRDDR_C OUT 0",
-				"TDM_A Playback", "TDMOUT_A OUT";
+				"TDM_A Playback", "TDMOUT_A OUT",
+				"TDMIN_A IN 1", "TDM_A Capture",
+				"TDMIN_A IN 3", "TDM_A Loopback",
+				"TODDR_A IN 0", "TDMIN_A OUT",
+				"TODDR_B IN 0", "TDMIN_A OUT",
+				"TODDR_C IN 0", "TDMIN_A OUT";
 
 		assigned-clocks = <&clkc CLKID_MPLL2>,
 				  <&clkc CLKID_MPLL0>,
@@ -193,8 +198,20 @@ dai-link-2 {
 			sound-dai = <&frddr_c>;
 		};
 
-		/* 8ch hdmi interface */
 		dai-link-3 {
+			sound-dai = <&toddr_a>;
+		};
+
+		dai-link-4 {
+			sound-dai = <&toddr_b>;
+		};
+
+		dai-link-5 {
+			sound-dai = <&toddr_c>;
+		};
+
+		/* 8ch hdmi interface */
+		dai-link-6 {
 			sound-dai = <&tdmif_a>;
 			dai-format = "i2s";
 			dai-tdm-slot-tx-mask-0 = <1 1>;
@@ -209,7 +226,7 @@ codec {
 		};
 
 		/* hdmi glue */
-		dai-link-4 {
+		dai-link-7 {
 			sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
 
 			codec {
@@ -449,10 +466,26 @@ &tdmif_a {
 	status = "okay";
 };
 
+&tdmin_a {
+	status = "okay";
+};
+
 &tdmout_a {
 	status = "okay";
 };
 
+&toddr_a {
+	status = "okay";
+};
+
+&toddr_b {
+	status = "okay";
+};
+
+&toddr_c {
+	status = "okay";
+};
+
 &tohdmitx {
 	status = "okay";
 };
-- 
2.28.0

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ