| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201208071432.55583-2-zong.li@sifive.com>
Date: Tue, 8 Dec 2020 15:14:28 +0800
From: Zong Li <zong.li@...ive.com>
To: paul.walmsley@...ive.com, palmer@...belt.com, sboyd@...nel.org,
schwab@...ux-m68k.org, pragnesh.patel@...nfive.com,
aou@...s.berkeley.edu, mturquette@...libre.com,
yash.shah@...ive.com, linux-kernel@...r.kernel.org,
linux-clk@...r.kernel.org, linux-riscv@...ts.infradead.org
Cc: Zong Li <zong.li@...ive.com>,
Pragnesh Patel <Pragnesh.patel@...ive.com>,
Palmer Dabbelt <palmerdabbelt@...gle.com>
Subject: [PATCH v6 1/5] clk: sifive: Extract prci core to common base
Extract common core of prci driver to an independent file, it could
allow other chips to reuse it. Separate SoCs-dependent code 'fu540'
from prci core, then we can easily add 'fu740' later.
Almost these changes are code movement. The different is adding the
private data for each SoC use, so it needs to get match data in probe
callback function, then use the data for initialization.
Signed-off-by: Zong Li <zong.li@...ive.com>
Reviewed-by: Pragnesh Patel <Pragnesh.patel@...ive.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@...gle.com>
---
drivers/clk/sifive/Makefile | 2 +
drivers/clk/sifive/fu540-prci.c | 579 +-----------------
drivers/clk/sifive/fu540-prci.h | 21 +
.../sifive/{fu540-prci.c => sifive-prci.c} | 396 +++---------
drivers/clk/sifive/sifive-prci.h | 201 ++++++
5 files changed, 322 insertions(+), 877 deletions(-)
create mode 100644 drivers/clk/sifive/fu540-prci.h
copy drivers/clk/sifive/{fu540-prci.c => sifive-prci.c} (41%)
create mode 100644 drivers/clk/sifive/sifive-prci.h
diff --git a/drivers/clk/sifive/Makefile b/drivers/clk/sifive/Makefile
index 0797f14fef6b..627effe2ece1 100644
--- a/drivers/clk/sifive/Makefile
+++ b/drivers/clk/sifive/Makefile
@@ -1,2 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
+obj-y += sifive-prci.o
+
obj-$(CONFIG_CLK_SIFIVE_FU540_PRCI) += fu540-prci.o
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/fu540-prci.c
index a8901f90a61a..34dc4ea6a3af 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/fu540-prci.c
@@ -3,6 +3,7 @@
* Copyright (C) 2018-2019 SiFive, Inc.
* Wesley Terpstra
* Paul Walmsley
+ * Zong Li
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -25,463 +26,43 @@
*/
#include <dt-bindings/clock/sifive-fu540-prci.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/clk/analogbits-wrpll-cln28hpc.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/io.h>
#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_clk.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
+#include "sifive-prci.h"
-/*
- * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
- * hfclk and rtcclk
- */
-#define EXPECTED_CLK_PARENT_COUNT 2
-
-/*
- * Register offsets and bitmasks
- */
-
-/* COREPLLCFG0 */
-#define PRCI_COREPLLCFG0_OFFSET 0x4
-# define PRCI_COREPLLCFG0_DIVR_SHIFT 0
-# define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
-# define PRCI_COREPLLCFG0_DIVF_SHIFT 6
-# define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
-# define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
-# define PRCI_COREPLLCFG0_RANGE_SHIFT 18
-# define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
-# define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
-# define PRCI_COREPLLCFG0_FSE_SHIFT 25
-# define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
-# define PRCI_COREPLLCFG0_LOCK_SHIFT 31
-# define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG0 */
-#define PRCI_DDRPLLCFG0_OFFSET 0xc
-# define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
-# define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
-# define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
-# define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
-# define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
-# define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
-# define PRCI_DDRPLLCFG0_FSE_SHIFT 25
-# define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
-# define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
-# define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG1 */
-#define PRCI_DDRPLLCFG1_OFFSET 0x10
-# define PRCI_DDRPLLCFG1_CKE_SHIFT 24
-# define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
-
-/* GEMGXLPLLCFG0 */
-#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
-# define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
-# define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
-# define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
-# define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
-# define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
-# define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
-
-/* GEMGXLPLLCFG1 */
-#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
-# define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 24
-# define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
+/* PRCI integration data for each WRPLL instance */
-/* CORECLKSEL */
-#define PRCI_CORECLKSEL_OFFSET 0x24
-# define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
-# define PRCI_CORECLKSEL_CORECLKSEL_MASK (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
-
-/* DEVICESRESETREG */
-#define PRCI_DEVICESRESETREG_OFFSET 0x28
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
-
-/* CLKMUXSTATUSREG */
-#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
-
-/*
- * Private structures
- */
-
-/**
- * struct __prci_data - per-device-instance data
- * @va: base virtual address of the PRCI IP block
- * @hw_clks: encapsulates struct clk_hw records
- *
- * PRCI per-device instance data
- */
-struct __prci_data {
- void __iomem *va;
- struct clk_hw_onecell_data hw_clks;
+static struct __prci_wrpll_data __prci_corepll_data = {
+ .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
+ .enable_bypass = sifive_prci_coreclksel_use_hfclk,
+ .disable_bypass = sifive_prci_coreclksel_use_corepll,
};
-/**
- * struct __prci_wrpll_data - WRPLL configuration and integration data
- * @c: WRPLL current configuration record
- * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
- * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
- * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
- *
- * @enable_bypass and @disable_bypass are used for WRPLL instances
- * that contain a separate external glitchless clock mux downstream
- * from the PLL. The WRPLL internal bypass mux is not glitchless.
- */
-struct __prci_wrpll_data {
- struct wrpll_cfg c;
- void (*enable_bypass)(struct __prci_data *pd);
- void (*disable_bypass)(struct __prci_data *pd);
- u8 cfg0_offs;
+static struct __prci_wrpll_data __prci_ddrpll_data = {
+ .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
};
-/**
- * struct __prci_clock - describes a clock device managed by PRCI
- * @name: user-readable clock name string - should match the manual
- * @parent_name: parent name for this clock
- * @ops: struct clk_ops for the Linux clock framework to use for control
- * @hw: Linux-private clock data
- * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
- * @pd: PRCI-specific data associated with this clock (if not NULL)
- *
- * PRCI clock data. Used by the PRCI driver to register PRCI-provided
- * clocks to the Linux clock infrastructure.
- */
-struct __prci_clock {
- const char *name;
- const char *parent_name;
- const struct clk_ops *ops;
- struct clk_hw hw;
- struct __prci_wrpll_data *pwd;
- struct __prci_data *pd;
+static struct __prci_wrpll_data __prci_gemgxlpll_data = {
+ .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
};
-#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
-
-/*
- * Private functions
- */
-
-/**
- * __prci_readl() - read from a PRCI register
- * @pd: PRCI context
- * @offs: register offset to read from (in bytes, from PRCI base address)
- *
- * Read the register located at offset @offs from the base virtual
- * address of the PRCI register target described by @pd, and return
- * the value to the caller.
- *
- * Context: Any context.
- *
- * Return: the contents of the register described by @pd and @offs.
- */
-static u32 __prci_readl(struct __prci_data *pd, u32 offs)
-{
- return readl_relaxed(pd->va + offs);
-}
-
-static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
-{
- writel_relaxed(v, pd->va + offs);
-}
-
-/* WRPLL-related private functions */
-
-/**
- * __prci_wrpll_unpack() - unpack WRPLL configuration registers into parameters
- * @c: ptr to a struct wrpll_cfg record to write config into
- * @r: value read from the PRCI PLL configuration register
- *
- * Given a value @r read from an FU540 PRCI PLL configuration register,
- * split it into fields and populate it into the WRPLL configuration record
- * pointed to by @c.
- *
- * The COREPLLCFG0 macros are used below, but the other *PLLCFG0 macros
- * have the same register layout.
- *
- * Context: Any context.
- */
-static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
-{
- u32 v;
-
- v = r & PRCI_COREPLLCFG0_DIVR_MASK;
- v >>= PRCI_COREPLLCFG0_DIVR_SHIFT;
- c->divr = v;
-
- v = r & PRCI_COREPLLCFG0_DIVF_MASK;
- v >>= PRCI_COREPLLCFG0_DIVF_SHIFT;
- c->divf = v;
-
- v = r & PRCI_COREPLLCFG0_DIVQ_MASK;
- v >>= PRCI_COREPLLCFG0_DIVQ_SHIFT;
- c->divq = v;
-
- v = r & PRCI_COREPLLCFG0_RANGE_MASK;
- v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
- c->range = v;
-
- c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
- WRPLL_FLAGS_EXT_FEEDBACK_MASK);
-
- /* external feedback mode not supported */
- c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
-}
-
-/**
- * __prci_wrpll_pack() - pack PLL configuration parameters into a register value
- * @c: pointer to a struct wrpll_cfg record containing the PLL's cfg
- *
- * Using a set of WRPLL configuration values pointed to by @c,
- * assemble a PRCI PLL configuration register value, and return it to
- * the caller.
- *
- * Context: Any context. Caller must ensure that the contents of the
- * record pointed to by @c do not change during the execution
- * of this function.
- *
- * Returns: a value suitable for writing into a PRCI PLL configuration
- * register
- */
-static u32 __prci_wrpll_pack(const struct wrpll_cfg *c)
-{
- u32 r = 0;
-
- r |= c->divr << PRCI_COREPLLCFG0_DIVR_SHIFT;
- r |= c->divf << PRCI_COREPLLCFG0_DIVF_SHIFT;
- r |= c->divq << PRCI_COREPLLCFG0_DIVQ_SHIFT;
- r |= c->range << PRCI_COREPLLCFG0_RANGE_SHIFT;
-
- /* external feedback mode not supported */
- r |= PRCI_COREPLLCFG0_FSE_MASK;
-
- return r;
-}
-
-/**
- * __prci_wrpll_read_cfg() - read the WRPLL configuration from the PRCI
- * @pd: PRCI context
- * @pwd: PRCI WRPLL metadata
- *
- * Read the current configuration of the PLL identified by @pwd from
- * the PRCI identified by @pd, and store it into the local configuration
- * cache in @pwd.
- *
- * Context: Any context. Caller must prevent the records pointed to by
- * @pd and @pwd from changing during execution.
- */
-static void __prci_wrpll_read_cfg(struct __prci_data *pd,
- struct __prci_wrpll_data *pwd)
-{
- __prci_wrpll_unpack(&pwd->c, __prci_readl(pd, pwd->cfg0_offs));
-}
-
-/**
- * __prci_wrpll_write_cfg() - write WRPLL configuration into the PRCI
- * @pd: PRCI context
- * @pwd: PRCI WRPLL metadata
- * @c: WRPLL configuration record to write
- *
- * Write the WRPLL configuration described by @c into the WRPLL
- * configuration register identified by @pwd in the PRCI instance
- * described by @c. Make a cached copy of the WRPLL's current
- * configuration so it can be used by other code.
- *
- * Context: Any context. Caller must prevent the records pointed to by
- * @pd and @pwd from changing during execution.
- */
-static void __prci_wrpll_write_cfg(struct __prci_data *pd,
- struct __prci_wrpll_data *pwd,
- struct wrpll_cfg *c)
-{
- __prci_writel(__prci_wrpll_pack(c), pwd->cfg0_offs, pd);
-
- memcpy(&pwd->c, c, sizeof(*c));
-}
-
-/* Core clock mux control */
-
-/**
- * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the HFCLK input source; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_hfclk(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-/**
- * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the PLL output clock; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-/*
- * Linux clock framework integration
- *
- * See the Linux clock framework documentation for more information on
- * these functions.
- */
-
-static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_wrpll_data *pwd = pc->pwd;
-
- return wrpll_calc_output_rate(&pwd->c, parent_rate);
-}
-
-static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long *parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_wrpll_data *pwd = pc->pwd;
- struct wrpll_cfg c;
-
- memcpy(&c, &pwd->c, sizeof(c));
-
- wrpll_configure_for_rate(&c, rate, *parent_rate);
-
- return wrpll_calc_output_rate(&c, *parent_rate);
-}
-
-static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_wrpll_data *pwd = pc->pwd;
- struct __prci_data *pd = pc->pd;
- int r;
-
- r = wrpll_configure_for_rate(&pwd->c, rate, parent_rate);
- if (r)
- return r;
-
- if (pwd->enable_bypass)
- pwd->enable_bypass(pd);
-
- __prci_wrpll_write_cfg(pd, pwd, &pwd->c);
-
- udelay(wrpll_calc_max_lock_us(&pwd->c));
-
- if (pwd->disable_bypass)
- pwd->disable_bypass(pd);
-
- return 0;
-}
+/* Linux clock framework integration */
static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
- .set_rate = sifive_fu540_prci_wrpll_set_rate,
- .round_rate = sifive_fu540_prci_wrpll_round_rate,
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+ .set_rate = sifive_prci_wrpll_set_rate,
+ .round_rate = sifive_prci_wrpll_round_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
};
static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
+ .recalc_rate = sifive_prci_wrpll_recalc_rate,
};
-/* TLCLKSEL clock integration */
-
-static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
-{
- struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
- struct __prci_data *pd = pc->pd;
- u32 v;
- u8 div;
-
- v = __prci_readl(pd, PRCI_CLKMUXSTATUSREG_OFFSET);
- v &= PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK;
- div = v ? 1 : 2;
-
- return div_u64(parent_rate, div);
-}
-
static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
- .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
-};
-
-/*
- * PRCI integration data for each WRPLL instance
- */
-
-static struct __prci_wrpll_data __prci_corepll_data = {
- .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
- .enable_bypass = __prci_coreclksel_use_hfclk,
- .disable_bypass = __prci_coreclksel_use_corepll,
-};
-
-static struct __prci_wrpll_data __prci_ddrpll_data = {
- .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
+ .recalc_rate = sifive_prci_tlclksel_recalc_rate,
};
-static struct __prci_wrpll_data __prci_gemgxlpll_data = {
- .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
-};
-
-/*
- * List of clock controls provided by the PRCI
- */
-
-static struct __prci_clock __prci_init_clocks[] = {
+/* List of clock controls provided by the PRCI */
+struct __prci_clock __prci_init_clocks_fu540[] = {
[PRCI_CLK_COREPLL] = {
.name = "corepll",
.parent_name = "hfclk",
@@ -506,125 +87,3 @@ static struct __prci_clock __prci_init_clocks[] = {
.ops = &sifive_fu540_prci_tlclksel_clk_ops,
},
};
-
-/**
- * __prci_register_clocks() - register clock controls in the PRCI with Linux
- * @dev: Linux struct device *
- *
- * Register the list of clock controls described in __prci_init_plls[] with
- * the Linux clock framework.
- *
- * Return: 0 upon success or a negative error code upon failure.
- */
-static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
-{
- struct clk_init_data init = { };
- struct __prci_clock *pic;
- int parent_count, i, r;
-
- parent_count = of_clk_get_parent_count(dev->of_node);
- if (parent_count != EXPECTED_CLK_PARENT_COUNT) {
- dev_err(dev, "expected only two parent clocks, found %d\n",
- parent_count);
- return -EINVAL;
- }
-
- /* Register PLLs */
- for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) {
- pic = &__prci_init_clocks[i];
-
- init.name = pic->name;
- init.parent_names = &pic->parent_name;
- init.num_parents = 1;
- init.ops = pic->ops;
- pic->hw.init = &init;
-
- pic->pd = pd;
-
- if (pic->pwd)
- __prci_wrpll_read_cfg(pd, pic->pwd);
-
- r = devm_clk_hw_register(dev, &pic->hw);
- if (r) {
- dev_warn(dev, "Failed to register clock %s: %d\n",
- init.name, r);
- return r;
- }
-
- r = clk_hw_register_clkdev(&pic->hw, pic->name, dev_name(dev));
- if (r) {
- dev_warn(dev, "Failed to register clkdev for %s: %d\n",
- init.name, r);
- return r;
- }
-
- pd->hw_clks.hws[i] = &pic->hw;
- }
-
- pd->hw_clks.num = i;
-
- r = devm_of_clk_add_hw_provider(dev, of_clk_hw_onecell_get,
- &pd->hw_clks);
- if (r) {
- dev_err(dev, "could not add hw_provider: %d\n", r);
- return r;
- }
-
- return 0;
-}
-
-/*
- * Linux device model integration
- *
- * See the Linux device model documentation for more information about
- * these functions.
- */
-static int sifive_fu540_prci_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct resource *res;
- struct __prci_data *pd;
- int r;
-
- pd = devm_kzalloc(dev,
- struct_size(pd, hw_clks.hws,
- ARRAY_SIZE(__prci_init_clocks)),
- GFP_KERNEL);
- if (!pd)
- return -ENOMEM;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- pd->va = devm_ioremap_resource(dev, res);
- if (IS_ERR(pd->va))
- return PTR_ERR(pd->va);
-
- r = __prci_register_clocks(dev, pd);
- if (r) {
- dev_err(dev, "could not register clocks: %d\n", r);
- return r;
- }
-
- dev_dbg(dev, "SiFive FU540 PRCI probed\n");
-
- return 0;
-}
-
-static const struct of_device_id sifive_fu540_prci_of_match[] = {
- { .compatible = "sifive,fu540-c000-prci", },
- {}
-};
-MODULE_DEVICE_TABLE(of, sifive_fu540_prci_of_match);
-
-static struct platform_driver sifive_fu540_prci_driver = {
- .driver = {
- .name = "sifive-fu540-prci",
- .of_match_table = sifive_fu540_prci_of_match,
- },
- .probe = sifive_fu540_prci_probe,
-};
-
-static int __init sifive_fu540_prci_init(void)
-{
- return platform_driver_register(&sifive_fu540_prci_driver);
-}
-core_initcall(sifive_fu540_prci_init);
diff --git a/drivers/clk/sifive/fu540-prci.h b/drivers/clk/sifive/fu540-prci.h
new file mode 100644
index 000000000000..c8271efa7bdc
--- /dev/null
+++ b/drivers/clk/sifive/fu540-prci.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2020 SiFive, Inc.
+ * Zong Li
+ */
+
+#ifndef __SIFIVE_CLK_FU540_PRCI_H
+#define __SIFIVE_CLK_FU540_PRCI_H
+
+#include "sifive-prci.h"
+
+#define NUM_CLOCK_FU540 4
+
+extern struct __prci_clock __prci_init_clocks_fu540[NUM_CLOCK_FU540];
+
+static const struct prci_clk_desc prci_clk_fu540 = {
+ .clks = __prci_init_clocks_fu540,
+ .num_clks = ARRAY_SIZE(__prci_init_clocks_fu540),
+};
+
+#endif /* __SIFIVE_CLK_FU540_PRCI_H */
diff --git a/drivers/clk/sifive/fu540-prci.c b/drivers/clk/sifive/sifive-prci.c
similarity index 41%
copy from drivers/clk/sifive/fu540-prci.c
copy to drivers/clk/sifive/sifive-prci.c
index a8901f90a61a..603c0cad5e8d 100644
--- a/drivers/clk/sifive/fu540-prci.c
+++ b/drivers/clk/sifive/sifive-prci.c
@@ -1,192 +1,15 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (C) 2018-2019 SiFive, Inc.
- * Wesley Terpstra
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * The FU540 PRCI implements clock and reset control for the SiFive
- * FU540-C000 chip. This driver assumes that it has sole control
- * over all PRCI resources.
- *
- * This driver is based on the PRCI driver written by Wesley Terpstra:
- * https://github.com/riscv/riscv-linux/commit/999529edf517ed75b56659d456d221b2ee56bb60
- *
- * References:
- * - SiFive FU540-C000 manual v1p0, Chapter 7 "Clocking and Reset"
+ * Copyright (C) 2020 SiFive, Inc.
+ * Copyright (C) 2020 Zong Li
*/
-#include <dt-bindings/clock/sifive-fu540-prci.h>
#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/clk/analogbits-wrpll-cln28hpc.h>
#include <linux/delay.h>
-#include <linux/err.h>
#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_clk.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-
-/*
- * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
- * hfclk and rtcclk
- */
-#define EXPECTED_CLK_PARENT_COUNT 2
-
-/*
- * Register offsets and bitmasks
- */
-
-/* COREPLLCFG0 */
-#define PRCI_COREPLLCFG0_OFFSET 0x4
-# define PRCI_COREPLLCFG0_DIVR_SHIFT 0
-# define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
-# define PRCI_COREPLLCFG0_DIVF_SHIFT 6
-# define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
-# define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
-# define PRCI_COREPLLCFG0_RANGE_SHIFT 18
-# define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
-# define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
-# define PRCI_COREPLLCFG0_FSE_SHIFT 25
-# define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
-# define PRCI_COREPLLCFG0_LOCK_SHIFT 31
-# define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG0 */
-#define PRCI_DDRPLLCFG0_OFFSET 0xc
-# define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
-# define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
-# define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
-# define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
-# define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
-# define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
-# define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
-# define PRCI_DDRPLLCFG0_FSE_SHIFT 25
-# define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
-# define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
-# define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
-
-/* DDRPLLCFG1 */
-#define PRCI_DDRPLLCFG1_OFFSET 0x10
-# define PRCI_DDRPLLCFG1_CKE_SHIFT 24
-# define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
-
-/* GEMGXLPLLCFG0 */
-#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
-# define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
-# define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
-# define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
-# define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
-# define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
-# define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
-# define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
-# define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
-# define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
-
-/* GEMGXLPLLCFG1 */
-#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
-# define PRCI_GEMGXLPLLCFG1_CKE_SHIFT 24
-# define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
-
-/* CORECLKSEL */
-#define PRCI_CORECLKSEL_OFFSET 0x24
-# define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
-# define PRCI_CORECLKSEL_CORECLKSEL_MASK (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
-
-/* DEVICESRESETREG */
-#define PRCI_DEVICESRESETREG_OFFSET 0x28
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
-# define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
-# define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
-# define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
-# define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
-# define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
-
-/* CLKMUXSTATUSREG */
-#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
-# define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
-
-/*
- * Private structures
- */
-
-/**
- * struct __prci_data - per-device-instance data
- * @va: base virtual address of the PRCI IP block
- * @hw_clks: encapsulates struct clk_hw records
- *
- * PRCI per-device instance data
- */
-struct __prci_data {
- void __iomem *va;
- struct clk_hw_onecell_data hw_clks;
-};
-
-/**
- * struct __prci_wrpll_data - WRPLL configuration and integration data
- * @c: WRPLL current configuration record
- * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
- * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
- * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
- *
- * @enable_bypass and @disable_bypass are used for WRPLL instances
- * that contain a separate external glitchless clock mux downstream
- * from the PLL. The WRPLL internal bypass mux is not glitchless.
- */
-struct __prci_wrpll_data {
- struct wrpll_cfg c;
- void (*enable_bypass)(struct __prci_data *pd);
- void (*disable_bypass)(struct __prci_data *pd);
- u8 cfg0_offs;
-};
-
-/**
- * struct __prci_clock - describes a clock device managed by PRCI
- * @name: user-readable clock name string - should match the manual
- * @parent_name: parent name for this clock
- * @ops: struct clk_ops for the Linux clock framework to use for control
- * @hw: Linux-private clock data
- * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
- * @pd: PRCI-specific data associated with this clock (if not NULL)
- *
- * PRCI clock data. Used by the PRCI driver to register PRCI-provided
- * clocks to the Linux clock infrastructure.
- */
-struct __prci_clock {
- const char *name;
- const char *parent_name;
- const struct clk_ops *ops;
- struct clk_hw hw;
- struct __prci_wrpll_data *pwd;
- struct __prci_data *pd;
-};
-
-#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
+#include <linux/of_device.h>
+#include "sifive-prci.h"
+#include "fu540-prci.h"
/*
* Private functions
@@ -222,7 +45,7 @@ static void __prci_writel(u32 v, u32 offs, struct __prci_data *pd)
* @c: ptr to a struct wrpll_cfg record to write config into
* @r: value read from the PRCI PLL configuration register
*
- * Given a value @r read from an FU540 PRCI PLL configuration register,
+ * Given a value @r read from an FU740 PRCI PLL configuration register,
* split it into fields and populate it into the WRPLL configuration record
* pointed to by @c.
*
@@ -251,8 +74,8 @@ static void __prci_wrpll_unpack(struct wrpll_cfg *c, u32 r)
v >>= PRCI_COREPLLCFG0_RANGE_SHIFT;
c->range = v;
- c->flags &= (WRPLL_FLAGS_INT_FEEDBACK_MASK |
- WRPLL_FLAGS_EXT_FEEDBACK_MASK);
+ c->flags &=
+ (WRPLL_FLAGS_INT_FEEDBACK_MASK | WRPLL_FLAGS_EXT_FEEDBACK_MASK);
/* external feedback mode not supported */
c->flags |= WRPLL_FLAGS_INT_FEEDBACK_MASK;
@@ -329,48 +152,6 @@ static void __prci_wrpll_write_cfg(struct __prci_data *pd,
memcpy(&pwd->c, c, sizeof(*c));
}
-/* Core clock mux control */
-
-/**
- * __prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the HFCLK input source; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_hfclk(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
-/**
- * __prci_coreclksel_use_corepll() - switch the CORECLK mux to output COREPLL
- * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
- *
- * Switch the CORECLK mux to the PLL output clock; return once complete.
- *
- * Context: Any context. Caller must prevent concurrent changes to the
- * PRCI_CORECLKSEL_OFFSET register.
- */
-static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
-{
- u32 r;
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
- r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
- __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-
- r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
-}
-
/*
* Linux clock framework integration
*
@@ -378,8 +159,8 @@ static void __prci_coreclksel_use_corepll(struct __prci_data *pd)
* these functions.
*/
-static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
@@ -387,9 +168,9 @@ static unsigned long sifive_fu540_prci_wrpll_recalc_rate(struct clk_hw *hw,
return wrpll_calc_output_rate(&pwd->c, parent_rate);
}
-static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long *parent_rate)
+long sifive_prci_wrpll_round_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
@@ -402,9 +183,8 @@ static long sifive_fu540_prci_wrpll_round_rate(struct clk_hw *hw,
return wrpll_calc_output_rate(&c, *parent_rate);
}
-static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw,
- unsigned long rate,
- unsigned long parent_rate)
+int sifive_prci_wrpll_set_rate(struct clk_hw *hw,
+ unsigned long rate, unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_wrpll_data *pwd = pc->pwd;
@@ -428,20 +208,10 @@ static int sifive_fu540_prci_wrpll_set_rate(struct clk_hw *hw,
return 0;
}
-static const struct clk_ops sifive_fu540_prci_wrpll_clk_ops = {
- .set_rate = sifive_fu540_prci_wrpll_set_rate,
- .round_rate = sifive_fu540_prci_wrpll_round_rate,
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
-};
-
-static const struct clk_ops sifive_fu540_prci_wrpll_ro_clk_ops = {
- .recalc_rate = sifive_fu540_prci_wrpll_recalc_rate,
-};
-
/* TLCLKSEL clock integration */
-static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw,
- unsigned long parent_rate)
+unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
{
struct __prci_clock *pc = clk_hw_to_prci_clock(hw);
struct __prci_data *pd = pc->pd;
@@ -455,68 +225,62 @@ static unsigned long sifive_fu540_prci_tlclksel_recalc_rate(struct clk_hw *hw,
return div_u64(parent_rate, div);
}
-static const struct clk_ops sifive_fu540_prci_tlclksel_clk_ops = {
- .recalc_rate = sifive_fu540_prci_tlclksel_recalc_rate,
-};
-
/*
- * PRCI integration data for each WRPLL instance
+ * Core clock mux control
*/
-static struct __prci_wrpll_data __prci_corepll_data = {
- .cfg0_offs = PRCI_COREPLLCFG0_OFFSET,
- .enable_bypass = __prci_coreclksel_use_hfclk,
- .disable_bypass = __prci_coreclksel_use_corepll,
-};
+/**
+ * sifive_prci_coreclksel_use_hfclk() - switch the CORECLK mux to output HFCLK
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the HFCLK input source; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
+ */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd)
+{
+ u32 r;
-static struct __prci_wrpll_data __prci_ddrpll_data = {
- .cfg0_offs = PRCI_DDRPLLCFG0_OFFSET,
-};
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r |= PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
-static struct __prci_wrpll_data __prci_gemgxlpll_data = {
- .cfg0_offs = PRCI_GEMGXLPLLCFG0_OFFSET,
-};
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
-/*
- * List of clock controls provided by the PRCI
+/**
+ * sifive_prci_coreclksel_use_corepll() - switch the CORECLK mux to output
+ * COREPLL
+ * @pd: struct __prci_data * for the PRCI containing the CORECLK mux reg
+ *
+ * Switch the CORECLK mux to the COREPLL output clock; return once complete.
+ *
+ * Context: Any context. Caller must prevent concurrent changes to the
+ * PRCI_CORECLKSEL_OFFSET register.
*/
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd)
+{
+ u32 r;
-static struct __prci_clock __prci_init_clocks[] = {
- [PRCI_CLK_COREPLL] = {
- .name = "corepll",
- .parent_name = "hfclk",
- .ops = &sifive_fu540_prci_wrpll_clk_ops,
- .pwd = &__prci_corepll_data,
- },
- [PRCI_CLK_DDRPLL] = {
- .name = "ddrpll",
- .parent_name = "hfclk",
- .ops = &sifive_fu540_prci_wrpll_ro_clk_ops,
- .pwd = &__prci_ddrpll_data,
- },
- [PRCI_CLK_GEMGXLPLL] = {
- .name = "gemgxlpll",
- .parent_name = "hfclk",
- .ops = &sifive_fu540_prci_wrpll_clk_ops,
- .pwd = &__prci_gemgxlpll_data,
- },
- [PRCI_CLK_TLCLK] = {
- .name = "tlclk",
- .parent_name = "corepll",
- .ops = &sifive_fu540_prci_tlclksel_clk_ops,
- },
-};
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET);
+ r &= ~PRCI_CORECLKSEL_CORECLKSEL_MASK;
+ __prci_writel(r, PRCI_CORECLKSEL_OFFSET, pd);
+
+ r = __prci_readl(pd, PRCI_CORECLKSEL_OFFSET); /* barrier */
+}
/**
- * __prci_register_clocks() - register clock controls in the PRCI with Linux
+ * __prci_register_clocks() - register clock controls in the PRCI
* @dev: Linux struct device *
*
- * Register the list of clock controls described in __prci_init_plls[] with
+ * Register the list of clock controls described in __prci_init_clocks[] with
* the Linux clock framework.
*
* Return: 0 upon success or a negative error code upon failure.
*/
-static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
+static int __prci_register_clocks(struct device *dev, struct __prci_data *pd,
+ const struct prci_clk_desc *desc)
{
struct clk_init_data init = { };
struct __prci_clock *pic;
@@ -530,8 +294,8 @@ static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
}
/* Register PLLs */
- for (i = 0; i < ARRAY_SIZE(__prci_init_clocks); ++i) {
- pic = &__prci_init_clocks[i];
+ for (i = 0; i < desc->num_clks; ++i) {
+ pic = &(desc->clks[i]);
init.name = pic->name;
init.parent_names = &pic->parent_name;
@@ -573,23 +337,22 @@ static int __prci_register_clocks(struct device *dev, struct __prci_data *pd)
return 0;
}
-/*
- * Linux device model integration
+/**
+ * sifive_prci_init() - initialize prci data and check parent count
*
- * See the Linux device model documentation for more information about
- * these functions.
+ * Return: 0 upon success or a negative error code upon failure.
*/
-static int sifive_fu540_prci_probe(struct platform_device *pdev)
+static int sifive_prci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct resource *res;
struct __prci_data *pd;
+ const struct prci_clk_desc *desc;
int r;
- pd = devm_kzalloc(dev,
- struct_size(pd, hw_clks.hws,
- ARRAY_SIZE(__prci_init_clocks)),
- GFP_KERNEL);
+ desc = of_device_get_match_data(&pdev->dev);
+
+ pd = devm_kzalloc(dev, struct_size(pd, hw_clks.hws, desc->num_clks), GFP_KERNEL);
if (!pd)
return -ENOMEM;
@@ -598,33 +361,32 @@ static int sifive_fu540_prci_probe(struct platform_device *pdev)
if (IS_ERR(pd->va))
return PTR_ERR(pd->va);
- r = __prci_register_clocks(dev, pd);
+ r = __prci_register_clocks(dev, pd, desc);
if (r) {
dev_err(dev, "could not register clocks: %d\n", r);
return r;
}
- dev_dbg(dev, "SiFive FU540 PRCI probed\n");
+ dev_dbg(dev, "SiFive PRCI probed\n");
return 0;
}
-static const struct of_device_id sifive_fu540_prci_of_match[] = {
- { .compatible = "sifive,fu540-c000-prci", },
+static const struct of_device_id sifive_prci_of_match[] = {
+ {.compatible = "sifive,fu540-c000-prci", .data = &prci_clk_fu540},
{}
};
-MODULE_DEVICE_TABLE(of, sifive_fu540_prci_of_match);
-static struct platform_driver sifive_fu540_prci_driver = {
- .driver = {
- .name = "sifive-fu540-prci",
- .of_match_table = sifive_fu540_prci_of_match,
+static struct platform_driver sifive_prci_driver = {
+ .driver = {
+ .name = "sifive-clk-prci",
+ .of_match_table = sifive_prci_of_match,
},
- .probe = sifive_fu540_prci_probe,
+ .probe = sifive_prci_probe,
};
-static int __init sifive_fu540_prci_init(void)
+static int __init sifive_prci_init(void)
{
- return platform_driver_register(&sifive_fu540_prci_driver);
+ return platform_driver_register(&sifive_prci_driver);
}
-core_initcall(sifive_fu540_prci_init);
+core_initcall(sifive_prci_init);
diff --git a/drivers/clk/sifive/sifive-prci.h b/drivers/clk/sifive/sifive-prci.h
new file mode 100644
index 000000000000..025f717bc053
--- /dev/null
+++ b/drivers/clk/sifive/sifive-prci.h
@@ -0,0 +1,201 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) 2018-2019 SiFive, Inc.
+ * Wesley Terpstra
+ * Paul Walmsley
+ * Zong Li
+ */
+
+#ifndef __SIFIVE_CLK_SIFIVE_PRCI_H
+#define __SIFIVE_CLK_SIFIVE_PRCI_H
+
+#include <linux/clk/analogbits-wrpll-cln28hpc.h>
+#include <linux/clk-provider.h>
+#include <linux/platform_device.h>
+
+/*
+ * EXPECTED_CLK_PARENT_COUNT: how many parent clocks this driver expects:
+ * hfclk and rtcclk
+ */
+#define EXPECTED_CLK_PARENT_COUNT 2
+
+/*
+ * Register offsets and bitmasks
+ */
+
+/* COREPLLCFG0 */
+#define PRCI_COREPLLCFG0_OFFSET 0x4
+#define PRCI_COREPLLCFG0_DIVR_SHIFT 0
+#define PRCI_COREPLLCFG0_DIVR_MASK (0x3f << PRCI_COREPLLCFG0_DIVR_SHIFT)
+#define PRCI_COREPLLCFG0_DIVF_SHIFT 6
+#define PRCI_COREPLLCFG0_DIVF_MASK (0x1ff << PRCI_COREPLLCFG0_DIVF_SHIFT)
+#define PRCI_COREPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_COREPLLCFG0_DIVQ_MASK (0x7 << PRCI_COREPLLCFG0_DIVQ_SHIFT)
+#define PRCI_COREPLLCFG0_RANGE_SHIFT 18
+#define PRCI_COREPLLCFG0_RANGE_MASK (0x7 << PRCI_COREPLLCFG0_RANGE_SHIFT)
+#define PRCI_COREPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_COREPLLCFG0_BYPASS_MASK (0x1 << PRCI_COREPLLCFG0_BYPASS_SHIFT)
+#define PRCI_COREPLLCFG0_FSE_SHIFT 25
+#define PRCI_COREPLLCFG0_FSE_MASK (0x1 << PRCI_COREPLLCFG0_FSE_SHIFT)
+#define PRCI_COREPLLCFG0_LOCK_SHIFT 31
+#define PRCI_COREPLLCFG0_LOCK_MASK (0x1 << PRCI_COREPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG0 */
+#define PRCI_DDRPLLCFG0_OFFSET 0xc
+#define PRCI_DDRPLLCFG0_DIVR_SHIFT 0
+#define PRCI_DDRPLLCFG0_DIVR_MASK (0x3f << PRCI_DDRPLLCFG0_DIVR_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVF_SHIFT 6
+#define PRCI_DDRPLLCFG0_DIVF_MASK (0x1ff << PRCI_DDRPLLCFG0_DIVF_SHIFT)
+#define PRCI_DDRPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_DDRPLLCFG0_DIVQ_MASK (0x7 << PRCI_DDRPLLCFG0_DIVQ_SHIFT)
+#define PRCI_DDRPLLCFG0_RANGE_SHIFT 18
+#define PRCI_DDRPLLCFG0_RANGE_MASK (0x7 << PRCI_DDRPLLCFG0_RANGE_SHIFT)
+#define PRCI_DDRPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_DDRPLLCFG0_BYPASS_MASK (0x1 << PRCI_DDRPLLCFG0_BYPASS_SHIFT)
+#define PRCI_DDRPLLCFG0_FSE_SHIFT 25
+#define PRCI_DDRPLLCFG0_FSE_MASK (0x1 << PRCI_DDRPLLCFG0_FSE_SHIFT)
+#define PRCI_DDRPLLCFG0_LOCK_SHIFT 31
+#define PRCI_DDRPLLCFG0_LOCK_MASK (0x1 << PRCI_DDRPLLCFG0_LOCK_SHIFT)
+
+/* DDRPLLCFG1 */
+#define PRCI_DDRPLLCFG1_OFFSET 0x10
+#define PRCI_DDRPLLCFG1_CKE_SHIFT 24
+#define PRCI_DDRPLLCFG1_CKE_MASK (0x1 << PRCI_DDRPLLCFG1_CKE_SHIFT)
+
+/* GEMGXLPLLCFG0 */
+#define PRCI_GEMGXLPLLCFG0_OFFSET 0x1c
+#define PRCI_GEMGXLPLLCFG0_DIVR_SHIFT 0
+#define PRCI_GEMGXLPLLCFG0_DIVR_MASK (0x3f << PRCI_GEMGXLPLLCFG0_DIVR_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVF_SHIFT 6
+#define PRCI_GEMGXLPLLCFG0_DIVF_MASK (0x1ff << PRCI_GEMGXLPLLCFG0_DIVF_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT 15
+#define PRCI_GEMGXLPLLCFG0_DIVQ_MASK (0x7 << PRCI_GEMGXLPLLCFG0_DIVQ_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_RANGE_SHIFT 18
+#define PRCI_GEMGXLPLLCFG0_RANGE_MASK (0x7 << PRCI_GEMGXLPLLCFG0_RANGE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT 24
+#define PRCI_GEMGXLPLLCFG0_BYPASS_MASK (0x1 << PRCI_GEMGXLPLLCFG0_BYPASS_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_FSE_SHIFT 25
+#define PRCI_GEMGXLPLLCFG0_FSE_MASK (0x1 << PRCI_GEMGXLPLLCFG0_FSE_SHIFT)
+#define PRCI_GEMGXLPLLCFG0_LOCK_SHIFT 31
+#define PRCI_GEMGXLPLLCFG0_LOCK_MASK (0x1 << PRCI_GEMGXLPLLCFG0_LOCK_SHIFT)
+
+/* GEMGXLPLLCFG1 */
+#define PRCI_GEMGXLPLLCFG1_OFFSET 0x20
+#define RCI_GEMGXLPLLCFG1_CKE_SHIFT 24
+#define PRCI_GEMGXLPLLCFG1_CKE_MASK (0x1 << PRCI_GEMGXLPLLCFG1_CKE_SHIFT)
+
+/* CORECLKSEL */
+#define PRCI_CORECLKSEL_OFFSET 0x24
+#define PRCI_CORECLKSEL_CORECLKSEL_SHIFT 0
+#define PRCI_CORECLKSEL_CORECLKSEL_MASK \
+ (0x1 << PRCI_CORECLKSEL_CORECLKSEL_SHIFT)
+
+/* DEVICESRESETREG */
+#define PRCI_DEVICESRESETREG_OFFSET 0x28
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT 0
+#define PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_CTRL_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT 1
+#define PRCI_DEVICESRESETREG_DDR_AXI_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_AXI_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT 2
+#define PRCI_DEVICESRESETREG_DDR_AHB_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_AHB_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT 3
+#define PRCI_DEVICESRESETREG_DDR_PHY_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_DDR_PHY_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT 5
+#define PRCI_DEVICESRESETREG_GEMGXL_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_GEMGXL_RST_N_SHIFT)
+#define PRCI_DEVICESRESETREG_CHIPLINK_RST_N_SHIFT 6
+#define PRCI_DEVICESRESETREG_CHIPLINK_RST_N_MASK \
+ (0x1 << PRCI_DEVICESRESETREG_CHIPLINK_RST_N_SHIFT)
+
+/* CLKMUXSTATUSREG */
+#define PRCI_CLKMUXSTATUSREG_OFFSET 0x2c
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT 1
+#define PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_MASK \
+ (0x1 << PRCI_CLKMUXSTATUSREG_TLCLKSEL_STATUS_SHIFT)
+
+/*
+ * Private structures
+ */
+
+/**
+ * struct __prci_data - per-device-instance data
+ * @va: base virtual address of the PRCI IP block
+ * @hw_clks: encapsulates struct clk_hw records
+ *
+ * PRCI per-device instance data
+ */
+struct __prci_data {
+ void __iomem *va;
+ struct clk_hw_onecell_data hw_clks;
+};
+
+/**
+ * struct __prci_wrpll_data - WRPLL configuration and integration data
+ * @c: WRPLL current configuration record
+ * @enable_bypass: fn ptr to code to bypass the WRPLL (if applicable; else NULL)
+ * @disable_bypass: fn ptr to code to not bypass the WRPLL (or NULL)
+ * @cfg0_offs: WRPLL CFG0 register offset (in bytes) from the PRCI base address
+ *
+ * @enable_bypass and @disable_bypass are used for WRPLL instances
+ * that contain a separate external glitchless clock mux downstream
+ * from the PLL. The WRPLL internal bypass mux is not glitchless.
+ */
+struct __prci_wrpll_data {
+ struct wrpll_cfg c;
+ void (*enable_bypass)(struct __prci_data *pd);
+ void (*disable_bypass)(struct __prci_data *pd);
+ u8 cfg0_offs;
+};
+
+/**
+ * struct __prci_clock - describes a clock device managed by PRCI
+ * @name: user-readable clock name string - should match the manual
+ * @parent_name: parent name for this clock
+ * @ops: struct clk_ops for the Linux clock framework to use for control
+ * @hw: Linux-private clock data
+ * @pwd: WRPLL-specific data, associated with this clock (if not NULL)
+ * @pd: PRCI-specific data associated with this clock (if not NULL)
+ *
+ * PRCI clock data. Used by the PRCI driver to register PRCI-provided
+ * clocks to the Linux clock infrastructure.
+ */
+struct __prci_clock {
+ const char *name;
+ const char *parent_name;
+ const struct clk_ops *ops;
+ struct clk_hw hw;
+ struct __prci_wrpll_data *pwd;
+ struct __prci_data *pd;
+};
+
+#define clk_hw_to_prci_clock(pwd) container_of(pwd, struct __prci_clock, hw)
+
+/*
+ * struct prci_clk_desc - describes the information of clocks of each SoCs
+ * @clks: point to a array of __prci_clock
+ * @num_clks: the number of element of clks
+ */
+struct prci_clk_desc {
+ struct __prci_clock *clks;
+ size_t num_clks;
+};
+
+/* Core clock mux control */
+void sifive_prci_coreclksel_use_hfclk(struct __prci_data *pd);
+void sifive_prci_coreclksel_use_corepll(struct __prci_data *pd);
+
+/* Linux clock framework integration */
+long sifive_prci_wrpll_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *parent_rate);
+int sifive_prci_wrpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate);
+unsigned long sifive_prci_wrpll_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
+unsigned long sifive_prci_tlclksel_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate);
+
+#endif /* __SIFIVE_CLK_SIFIVE_PRCI_H */
--
2.29.2
Powered by blists - more mailing lists