linux-kernel - Re: [PATCH v5 0/3] Add support for MaxLinear/Exar USB to serial converters

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20201208105128.GA9925@work>
Date:   Tue, 8 Dec 2020 16:21:28 +0530
From:   Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To:     johan@...nel.org, gregkh@...uxfoundation.org
Cc:     linux-usb@...r.kernel.org, linux-kernel@...r.kernel.org,
        patong.mxl@...il.com, linus.walleij@...aro.org,
        mchehab+huawei@...nel.org, angelo.dureghello@...esys.com
Subject: Re: [PATCH v5 0/3] Add support for MaxLinear/Exar USB to serial
 converters

On Sun, Nov 22, 2020 at 10:38:19PM +0530, Manivannan Sadhasivam wrote:
> From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
> 
> Hello,
> 
> This series adds support for MaxLinear/Exar USB to serial converters.
> This driver only supports XR21V141X series but it can easily be extended
> to other series in future.
> 
> This driver is inspired from the initial one submitted by Patong Yang:
> https://lore.kernel.org/linux-usb/20180404070634.nhspvmxcjwfgjkcv@advantechmxl-desktop
> 
> While the initial driver was a custom tty USB driver exposing whole
> new serial interface ttyXRUSBn, this version is completely based on USB
> serial core thus exposing the interfaces as ttyUSBn. This will avoid
> the overhead of exposing a new USB serial interface which the userspace
> tools are unaware of.
> 
> This series has been tested with Hikey970 board hosting XR21V141X chip.
> 
> NOTE: I've removed all reviews and tested-by tags as the code has gone
> through substantial rework. Greg, Linus, Mauro please consider reviewing
> again.
> 

Any chance to get this series into v5.11?

Thanks,
Mani

> Thanks,
> Mani
> 
> Changes in v5:
> 
> * Incorporated review comments from Johan. Noticeable ones are:
>   - Made serial and gpiolib support exclusive and used mutex to avoid
>     race. The gpio requests from gpiolib will be rejected when serial
>     port is in use.
>   - The driver only binds to data interface but claims both control and
>     data interface.
>   - Handled B0 request
>   - Removed all reviews as the code has gone through substantial rework.
> 
> Changes in v4:
> 
> * Multiple improvements based on Johan's review. Noticeable ones are:
>   - Now the driver claims both control and data interfaces but only registers
>     tty device for data interface.
>   - GPIO pin status is now shared between the console and gpiolib
>     implementations. This is done to avoid changing the lines spuriously.
>   - A separate port_open flag is added to reject GPIO requests while the tty
>     port is open.
>   - Removed padding PID to gpio device.
> * Added Greg and Mauro's review and tested tags.
> * Included a patch from Mauro to avoid the CDC-ACM driver to claim this device
>   when this driver is built.
> 
> Changes in v3:
> 
> * Dropped the check for PID and also the reg_width property.
> 
> Changes in v2:
> 
> * Dropped the code related to handling variable register size. It's all u8 now.
> * Dropped the header file and moved the contents to driver itself.
> * Added Linus's reviewed-by tag for gpiochip patch.
> * Added PID to gpiochip label
> * Dropped gpiochip for interface 0
> 
> Manivannan Sadhasivam (2):
>   usb: serial: Add MaxLinear/Exar USB to Serial driver
>   usb: serial: xr_serial: Add gpiochip support
> 
> Mauro Carvalho Chehab (1):
>   usb: cdc-acm: Ignore Exar XR21V141X when serial driver is built
> 
>  drivers/usb/class/cdc-acm.c    |   6 +
>  drivers/usb/serial/Kconfig     |   9 +
>  drivers/usb/serial/Makefile    |   1 +
>  drivers/usb/serial/xr_serial.c | 854 +++++++++++++++++++++++++++++++++
>  4 files changed, 870 insertions(+)
>  create mode 100644 drivers/usb/serial/xr_serial.c
> 
> -- 
> 2.25.1
>