Date:   Tue, 08 Dec 2020 13:13:13 +0200
From:   Maxim Levitsky <mlevitsk@...hat.com>
To:     Oliver Upton <oupton@...gle.com>
Cc:     kvm list <kvm@...r.kernel.org>, "H. Peter Anvin" <hpa@...or.com>,
        Paolo Bonzini <pbonzini@...hat.com>,
        Jonathan Corbet <corbet@....net>,
        Jim Mattson <jmattson@...gle.com>,
        Wanpeng Li <wanpengli@...cent.com>,
        "open list:KERNEL SELFTEST FRAMEWORK" 
        <linux-kselftest@...r.kernel.org>,
        Vitaly Kuznetsov <vkuznets@...hat.com>,
        Marcelo Tosatti <mtosatti@...hat.com>,
        Thomas Gleixner <tglx@...utronix.de>,
        Sean Christopherson <sean.j.christopherson@...el.com>,
        open list <linux-kernel@...r.kernel.org>,
        Ingo Molnar <mingo@...hat.com>,
        "maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)" <x86@...nel.org>,
        Joerg Roedel <joro@...tes.org>, Borislav Petkov <bp@...en8.de>,
        Shuah Khan <shuah@...nel.org>,
        Andrew Jones <drjones@...hat.com>,
        "open list:DOCUMENTATION" <linux-doc@...r.kernel.org>
Subject: Re: [PATCH v2 1/3] KVM: x86: implement KVM_{GET|SET}_TSC_STATE

On Mon, 2020-12-07 at 11:29 -0600, Oliver Upton wrote:
> On Thu, Dec 3, 2020 at 11:12 AM Maxim Levitsky <mlevitsk@...hat.com> wrote:
> > These two new ioctls allow to more precisly capture and
> > restore guest's TSC state.
> > 
> > Both ioctls are meant to be used to accurately migrate guest TSC
> > even when there is a significant downtime during the migration.
> > 
> > Suggested-by: Paolo Bonzini <pbonzini@...hat.com>
> > Signed-off-by: Maxim Levitsky <mlevitsk@...hat.com>
> > ---
> >  Documentation/virt/kvm/api.rst | 65 ++++++++++++++++++++++++++++++
> >  arch/x86/kvm/x86.c             | 73 ++++++++++++++++++++++++++++++++++
> >  include/uapi/linux/kvm.h       | 15 +++++++
> >  3 files changed, 153 insertions(+)
> > 
> > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> > index 70254eaa5229f..ebecfe4b414ce 100644
> > --- a/Documentation/virt/kvm/api.rst
> > +++ b/Documentation/virt/kvm/api.rst
> > @@ -4826,6 +4826,71 @@ If a vCPU is in running state while this ioctl is invoked, the vCPU may
> >  experience inconsistent filtering behavior on MSR accesses.
> > 
> > 
> > +4.127 KVM_GET_TSC_STATE
> > +----------------------------
> > +
> > +:Capability: KVM_CAP_PRECISE_TSC
> > +:Architectures: x86
> > +:Type: vcpu ioctl
> > +:Parameters: struct kvm_tsc_state
> > +:Returns: 0 on success, < 0 on error
> > +
> > +::
> > +
> > +  #define KVM_TSC_STATE_TIMESTAMP_VALID 1
> > +  #define KVM_TSC_STATE_TSC_ADJUST_VALID 2
> > +  struct kvm_tsc_state {
> > +       __u32 flags;
> > +       __u64 nsec;
> > +       __u64 tsc;
> > +       __u64 tsc_adjust;
> > +  };
> > +
> > +flags values for ``struct kvm_tsc_state``:
> > +
> > +``KVM_TSC_STATE_TIMESTAMP_VALID``
> > +
> > +  ``nsec`` contains nanoseconds from unix epoch.
> > +    Always set by KVM_GET_TSC_STATE, might be omitted in KVM_SET_TSC_STATE
> > +
> > +``KVM_TSC_STATE_TSC_ADJUST_VALID``
> > +
> > +  ``tsc_adjust`` contains valid IA32_TSC_ADJUST value
> > +
> > +
> > +This ioctl allows the user space to read the guest's IA32_TSC,IA32_TSC_ADJUST,
> > +and the current value of host's CLOCK_REALTIME clock in nanoseconds since unix
> > +epoch.
> > +
> > +
> > +4.128 KVM_SET_TSC_STATE
> > +----------------------------
> > +
> > +:Capability: KVM_CAP_PRECISE_TSC
> > +:Architectures: x86
> > +:Type: vcpu ioctl
> > +:Parameters: struct kvm_tsc_state
> > +:Returns: 0 on success, < 0 on error
> > +
> > +::
> > +
> > +This ioctl allows to reconstruct the guest's IA32_TSC and TSC_ADJUST value
> > +from the state obtained in the past by KVM_GET_TSC_STATE on the same vCPU.
> > +
> > +If 'KVM_TSC_STATE_TIMESTAMP_VALID' is set in flags,
> > +KVM will adjust the guest TSC value by the time that passed since the moment
> > +CLOCK_REALTIME timestamp was saved in the struct and current value of
> > +CLOCK_REALTIME, and set the guest's TSC to the new value.
> > +
> > +Otherwise KVM will set the guest TSC value to the exact value as given
> > +in the struct.
> > +
> > +if KVM_TSC_STATE_TSC_ADJUST_VALID is set, and guest supports IA32_MSR_TSC_ADJUST,
> > +then its value will be set to the given value from the struct.
> > +
> > +It is assumed that either both ioctls will be run on the same machine,
> > +or that source and destination machines have synchronized clocks.
> > +
> >  5. The kvm_run structure
> >  ========================
> > 
> > diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
> > index a3fdc16cfd6f3..9b8a2fe3a2398 100644
> > --- a/arch/x86/kvm/x86.c
> > +++ b/arch/x86/kvm/x86.c
> > @@ -2438,6 +2438,21 @@ static bool kvm_get_walltime_and_clockread(struct timespec64 *ts,
> > 
> >         return gtod_is_based_on_tsc(do_realtime(ts, tsc_timestamp));
> >  }
> > +
> > +
> > +static void kvm_get_walltime(u64 *walltime_ns, u64 *host_tsc)
> > +{
> > +       struct timespec64 ts;
> > +
> > +       if (kvm_get_walltime_and_clockread(&ts, host_tsc)) {
> > +               *walltime_ns = timespec64_to_ns(&ts);
> > +               return;
> > +       }
> > +
> > +       *host_tsc = rdtsc();
> > +       *walltime_ns = ktime_get_real_ns();
> > +}
> > +
> >  #endif
> > 
> >  /*
> > @@ -3757,6 +3772,9 @@ int kvm_vm_ioctl_check_extension(struct kvm *kvm, long ext)
> >         case KVM_CAP_X86_USER_SPACE_MSR:
> >         case KVM_CAP_X86_MSR_FILTER:
> >         case KVM_CAP_ENFORCE_PV_FEATURE_CPUID:
> > +#ifdef CONFIG_X86_64
> > +       case KVM_CAP_PRECISE_TSC:
> > +#endif
> >                 r = 1;
> >                 break;
> >         case KVM_CAP_SYNC_REGS:
> > @@ -4999,6 +5017,61 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
> >         case KVM_GET_SUPPORTED_HV_CPUID:
> >                 r = kvm_ioctl_get_supported_hv_cpuid(vcpu, argp);
> >                 break;
> > +#ifdef CONFIG_X86_64
> > +       case KVM_GET_TSC_STATE: {
> > +               struct kvm_tsc_state __user *user_tsc_state = argp;
> > +               u64 host_tsc;
> > +
> > +               struct kvm_tsc_state tsc_state = {
> > +                       .flags = KVM_TSC_STATE_TIMESTAMP_VALID
> > +               };
> > +
> > +               kvm_get_walltime(&tsc_state.nsec, &host_tsc);
> > +               tsc_state.tsc = kvm_read_l1_tsc(vcpu, host_tsc);
> > +
> > +               if (guest_cpuid_has(vcpu, X86_FEATURE_TSC_ADJUST)) {
> > +                       tsc_state.tsc_adjust = vcpu->arch.ia32_tsc_adjust_msr;
> > +                       tsc_state.flags |= KVM_TSC_STATE_TSC_ADJUST_VALID;
> > +               }
> 
> [...]
> 
> > +
> > +               r = -EFAULT;
> > +               if (copy_to_user(user_tsc_state, &tsc_state, sizeof(tsc_state)))
> > +                       goto out;
> > +               r = 0;
> > +               break;
> > +       }
> > +       case KVM_SET_TSC_STATE: {
> > +               struct kvm_tsc_state __user *user_tsc_state = argp;
> > +               struct kvm_tsc_state tsc_state;
> > +               u64 host_tsc, wall_nsec;
> > +
> > +               u64 new_guest_tsc, new_guest_tsc_offset;
> > +
> > +               r = -EFAULT;
> > +               if (copy_from_user(&tsc_state, user_tsc_state, sizeof(tsc_state)))
> > +                       goto out;
> > +
> > +               kvm_get_walltime(&wall_nsec, &host_tsc);
> > +               new_guest_tsc = tsc_state.tsc;
> > +
> > +               if (tsc_state.flags & KVM_TSC_STATE_TIMESTAMP_VALID) {
> > +                       s64 diff = wall_nsec - tsc_state.nsec;
> > +                       if (diff >= 0)
> > +                               new_guest_tsc += nsec_to_cycles(vcpu, diff);
> > +                       else
> > +                               new_guest_tsc -= nsec_to_cycles(vcpu, -diff);
> > +               }
> > +
> > +               new_guest_tsc_offset = new_guest_tsc - kvm_scale_tsc(vcpu, host_tsc);
> > +               kvm_vcpu_write_tsc_offset(vcpu, new_guest_tsc_offset);
> 
> How would a VMM maintain the phase relationship between guest TSCs
> using these ioctls?

By using the nanosecond timestamp. 
 
While I did made it optional in the V2 it was done for the sole sake of being 
able to set TSC on (re)boot to 0 from qemu, and for cases when qemu migrates 
from a VM where the feature is not enabled.
In this case the tsc is set to the given value exactly, just like you
can do today with KVM_SET_MSRS.
In all other cases the nanosecond timestamp will be given.
 
When the userspace uses the nanosecond timestamp, the phase relationship
would not only be maintained but be exact, even if TSC reads were not
synchronized and even if their restore on the target wasn't synchronized as well.
 
Here is an example:
 
Let's assume that TSC on source/target is synchronized, and that the guest TSC
is synchronized as well.

Let's call the guest TSC frequency F (guest TSC increments by F each second)
 
We do KVM_GET_TSC_STATE on vcpu0 and receive (t0,tsc0).
We do KVM_GET_TSC_STATE on vcpu1 after 1 second passed (exaggerated) 
and receive (t0 + 1s, tsc0 + F)
 
 
We do KVM_SET_TSC_STATE at t0 + 10s on vcpu0 after migration, 
and vcpu0's guest tsc is set to tsc0 + F[(t0 + 10s) - t0] = tsc0 + 10*F
 
We do KVM_SET_TSC_STATE at nsec0 + 12s on vcpu1 (also exaggerated)
and  get [tsc0+F] + F[(t0 + 12s) - (t0+1s)] = tsc0 + 12*F
 
Since 2 seconds passed by, both vCPUs have now their TSC set to tsc0 + 12*F.
 
I use kvm's own functions to read the CLOCK_REALTIME, which are done 
in such a way that you first read host TSC once and then convert it to 
nanoseconds by scaling/offsetting it as the kernel would, thus 
there is no random error introduced here.

So except numerical errors,
(which are unavoidable anyway, and should be neglectable) this algorithm should
both keep the TSC in sync, and even keep its absolute time reference
as accurate as the clock synchronization between the host and the target is.

(an offset between source and destination clocks will affect 
all the TSCs in the same manner, as long as both 
source and destination clocks are stable)


> 
> For as bugged as the old way of doing things is (i.e. the magic
> handling of IA32_TSC), it was at least possible to keep guest TSCs in
> sync across a live migration so long as you satisfied the conditions
> where KVM decides to fudge the TSCs on your behalf. However, if we
> migrate the TSCs by value with an optional timestamp to account for
> elapsed time, it would appear that the guest TSC offset is likely to
> be inconsistent across vCPUs as the offset calculations above do not
> use a fixed host tsc timestamp across all vCPUs.

> 
> The reason I'd suggested yielding control of the tsc offset controls
> to userspace is that they're unaffected by such variations in per-vCPU
> calculations. Not only that, userspace can decide how it wants TSCs to
> be handled across a migration explicitly instead of relying on the
> above computation being done in the kernel.
> 
> > +
> > +               if (tsc_state.flags & KVM_TSC_STATE_TSC_ADJUST_VALID)
> > +                       if (guest_cpuid_has(vcpu, X86_FEATURE_TSC_ADJUST))
> > +                               vcpu->arch.ia32_tsc_adjust_msr = tsc_state.tsc_adjust;
> 
> How is this ioctl's handling of the TSC_ADJUST msr an improvement over
> KVM_{GET,SET}_MSRS like before? It seems orthogonal to the rest of the
> intended API as it isn't involved your computation above.

It's more a refactoring thing. The goal is to avoid 'magic' handling 
of host accesses in KVM_{GET,SET}_MSRS and instead make them 
behave the same way as if the guest read that msr.
That can be useful for debug and such.
 
The second patch adds a KVM quirk, which should be disabled 
when the new API is used.

When disabled, it makes it hard to use the KVM_{GET,SET}_MSRS 
to set both TSC and TSC_ADJUST at the same time to given values,
since these msrs are tied to each other when guest writes them,
and the quirk disables the special (untied) write we had for host writes
to these msrs.


Think of these new ioctls as a way to saving and restoring
the internal TSC state, without bothering even to think what is inside. 
Kind of like we save/restore the nested state.

Best regards,
	Maxim Levitsky


> 
> > +               r = 0;
> > +               break;
> > +       }
> > +#endif
> >         default:
> >                 r = -EINVAL;
> >         }
> > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
> > index 886802b8ffba3..bf4c38fd58291 100644
> > --- a/include/uapi/linux/kvm.h
> > +++ b/include/uapi/linux/kvm.h
> > @@ -1056,6 +1056,7 @@ struct kvm_ppc_resize_hpt {
> >  #define KVM_CAP_ENFORCE_PV_FEATURE_CPUID 190
> >  #define KVM_CAP_SYS_HYPERV_CPUID 191
> >  #define KVM_CAP_DIRTY_LOG_RING 192
> > +#define KVM_CAP_PRECISE_TSC 193
> > 
> >  #ifdef KVM_CAP_IRQ_ROUTING
> > 
> > @@ -1169,6 +1170,16 @@ struct kvm_clock_data {
> >         __u32 pad[9];
> >  };
> > 
> > +
> > +#define KVM_TSC_STATE_TIMESTAMP_VALID 1
> > +#define KVM_TSC_STATE_TSC_ADJUST_VALID 2
> > +struct kvm_tsc_state {
> > +       __u32 flags;
> > +       __u64 nsec;
> > +       __u64 tsc;
> > +       __u64 tsc_adjust;
> > +};
> > +
> >  /* For KVM_CAP_SW_TLB */
> > 
> >  #define KVM_MMU_FSL_BOOKE_NOHV         0
> > @@ -1563,6 +1574,10 @@ struct kvm_pv_cmd {
> >  /* Available with KVM_CAP_DIRTY_LOG_RING */
> >  #define KVM_RESET_DIRTY_RINGS          _IO(KVMIO, 0xc7)
> > 
> > +/* Available with KVM_CAP_PRECISE_TSC*/
> > +#define KVM_SET_TSC_STATE          _IOW(KVMIO,  0xc8, struct kvm_tsc_state)
> > +#define KVM_GET_TSC_STATE          _IOR(KVMIO,  0xc9, struct kvm_tsc_state)
> > +
> >  /* Secure Encrypted Virtualization command */
> >  enum sev_cmd_id {
> >         /* Guest initialization commands */
> > --
> > 2.26.2
> > 

Powered by blists - more mailing lists