| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201209232606.GB1258791@robh.at.kernel.org>
Date: Wed, 9 Dec 2020 17:26:06 -0600
From: Rob Herring <robh@...nel.org>
To: Vinod Koul <vkoul@...nel.org>
Cc: Bjorn Andersson <bjorn.andersson@...aro.org>,
linux-arm-msm@...r.kernel.org, Andy Gross <agross@...nel.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/4] arm64: dts: qcom: Add basic devicetree support for
SM8350 SoC
On Fri, Dec 04, 2020 at 11:13:46AM +0530, Vinod Koul wrote:
> Add basic devicetree support for Qualcomm Technologies, Inc SM8350 SoC.
> This adds gcc, pinctrl, reserved memory, uart, cpu nodes for this SoC.
>
> Signed-off-by: Vinod Koul <vkoul@...nel.org>
> ---
> arch/arm64/boot/dts/qcom/sm8350.dtsi | 496 +++++++++++++++++++++++++++
> 1 file changed, 496 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm8350.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> new file mode 100644
> index 000000000000..9e4bb29abe62
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
> @@ -0,0 +1,496 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Linaro Limaited
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-sm8350.h>
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/mailbox/qcom-ipcc.h>
> +#include <dt-bindings/power/qcom-aoss-qmp.h>
> +#include <dt-bindings/power/qcom-rpmpd.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen { };
> +
> + clocks {
> + xo_board: xo-board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <38400000>;
> + clock-output-names = "xo_board";
> + };
> +
> + sleep_clk: sleep-clk {
> + compatible = "fixed-clock";
> + clock-frequency = <32000>;
> + #clock-cells = <0>;
> + };
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@0 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
Not documented. Nor likely specific enough to be accepted.
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + next-level-cache = <&L2_0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
Should have a 'level' property IIRC.
> + L3_0: l3-cache {
Seems like this should be outside of cpus.
> + compatible = "cache";
> + };
> + };
> + };
> +
> + CPU1: cpu@100 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + next-level-cache = <&L2_100>;
> + L2_100: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU2: cpu@200 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x200>;
> + enable-method = "psci";
> + next-level-cache = <&L2_200>;
> + L2_200: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU3: cpu@300 {
> + device_type = "cpu";
> + compatible = "qcom,kryo";
> + reg = <0x0 0x300>;
> + enable-method = "psci";
> + next-level-cache = <&L2_300>;
> + L2_300: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU4: cpu@400 {
> + device_type = "cpu";
> + compatible = "qcom,kryo485";
> + reg = <0x0 0x400>;
> + enable-method = "psci";
> + next-level-cache = <&L2_400>;
> + L2_400: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU5: cpu@500 {
> + device_type = "cpu";
> + compatible = "qcom,kryo485";
> + reg = <0x0 0x500>;
> + enable-method = "psci";
> + next-level-cache = <&L2_500>;
> + L2_500: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> +
> + };
> +
> + CPU6: cpu@600 {
> + device_type = "cpu";
> + compatible = "qcom,kryo485";
> + reg = <0x0 0x600>;
> + enable-method = "psci";
> + next-level-cache = <&L2_600>;
> + L2_600: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> +
> + CPU7: cpu@700 {
> + device_type = "cpu";
> + compatible = "qcom,kryo485";
> + reg = <0x0 0x700>;
> + enable-method = "psci";
> + next-level-cache = <&L2_700>;
> + L2_700: l2-cache {
> + compatible = "cache";
> + next-level-cache = <&L3_0>;
> + };
> + };
> + };
> +
> + firmware {
> + scm: scm {
> + compatible = "qcom,scm";
SoC specific compatible?
> + #reset-cells = <1>;
> + };
> + };
> +
> + memory@...00000 {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the size */
> + reg = <0x0 0x80000000 0x0 0x0>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
> + };
Non-homogeneous system (big.LITTLE?), but only 1 PMU? All cores have the
same events?
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + reserved_memory: reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + hyp_mem: memory@...00000 {
> + reg = <0x0 0x80000000 0x0 0x600000>;
> + no-map;
> + };
> +
> + xbl_aop_mem: memory@...00000 {
> + no-map;
> + reg = <0x0 0x80700000 0x0 0x160000>;
> + };
> +
> + cmd_db: memory@...60000 {
> + compatible = "qcom,cmd-db";
> + reg = <0x0 0x80860000 0x0 0x20000>;
> + no-map;
> + };
> +
> + reserved_xbl_uefi_log: memory@...80000 {
> + reg = <0x0 0x80880000 0x0 0x14000>;
> + no-map;
> + };
> +
> + smem_mem: memory@...00000 {
> + reg = <0x0 0x80900000 0x0 0x200000>;
> + no-map;
> + };
> +
> + cpucp_fw_mem: memory@...00000 {
> + reg = <0x0 0x80b00000 0x0 0x100000>;
> + no-map;
> + };
> +
> + cdsp_secure_heap: memory@...00000 {
> + reg = <0x0 0x80c00000 0x0 0x4600000>;
> + no-map;
> + };
> +
> + pil_camera_mem: mmeory@...00000 {
> + reg = <0x0 0x85200000 0x0 0x500000>;
> + no-map;
> + };
> +
> + pil_video_mem: memory@...00000 {
> + reg = <0x0 0x85700000 0x0 0x500000>;
> + no-map;
> + };
> +
> + pil_cvp_mem: memory@...00000 {
> + reg = <0x0 0x85c00000 0x0 0x500000>;
> + no-map;
> + };
> +
> + pil_adsp_mem: memory@...00000 {
> + reg = <0x0 0x86100000 0x0 0x2100000>;
> + no-map;
> + };
> +
> + pil_slpi_mem: memory@...00000 {
> + reg = <0x0 0x88200000 0x0 0x1500000>;
> + no-map;
> + };
> +
> + pil_cdsp_mem: memory@...00000 {
> + reg = <0x0 0x89700000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + pil_ipa_fw_mem: memory@...00000 {
> + reg = <0x0 0x8b500000 0x0 0x10000>;
> + no-map;
> + };
> +
> + pil_ipa_gsi_mem: memory@...10000 {
> + reg = <0x0 0x8b510000 0x0 0xa000>;
> + no-map;
> + };
> +
> + pil_gpu_mem: memory@...1a000 {
> + reg = <0x0 0x8b51a000 0x0 0x2000>;
> + no-map;
> + };
> +
> + pil_spss_mem: memory@...00000 {
> + reg = <0x0 0x8b600000 0x0 0x100000>;
> + no-map;
> + };
> +
> + pil_modem_mem: memory@...00000 {
> + reg = <0x0 0x8b800000 0x0 0x10000000>;
> + no-map;
> + };
> +
> + hyp_reserved_mem: memory@...00000 {
> + reg = <0x0 0xd0000000 0x0 0x800000>;
> + no-map;
> + };
> +
> + pil_trustedvm_mem: memory@...00000 {
> + reg = <0x0 0xd0800000 0x0 0x76f7000>;
> + no-map;
> + };
> +
> + qrtr_shbuf: memory@...f7000 {
> + reg = <0x0 0xd7ef7000 0x0 0x9000>;
> + no-map;
> + };
> +
> + chan0_shbuf: memory@...00000 {
> + reg = <0x0 0xd7f00000 0x0 0x80000>;
> + no-map;
> + };
> +
> + chan1_shbuf: memory@...80000 {
> + reg = <0x0 0xd7f80000 0x0 0x80000>;
> + no-map;
> + };
> +
> + removed_mem: memory@...00000 {
> + reg = <0x0 0xd8800000 0x0 0x6800000>;
> + no-map;
> + };
> + };
> +
> + smem: qcom,smem {
> + compatible = "qcom,smem";
> + memory-region = <&smem_mem>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + soc: soc@0 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges = <0 0 0 0 0x10 0>;
> + dma-ranges = <0 0 0 0 0x10 0>;
> + compatible = "simple-bus";
> +
> + gcc: clock-controller@...000 {
> + compatible = "qcom,gcc-sm8350";
> + reg = <0x0 0x00100000 0x0 0x1f0000>;
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + clock-names = "bi_tcxo", "sleep_clk";
> + clocks = <&rpmhcc RPMH_CXO_CLK>, <&sleep_clk>;
> + };
> +
> + ipcc: mailbox@...000 {
> + compatible = "qcom,sm8350-ipcc", "qcom,ipcc";
> + reg = <0 0x00408000 0 0x1000>;
> + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + #mbox-cells = <2>;
> + };
> +
> + qupv3_id_1: geniqup@...000 {
> + compatible = "qcom,geni-se-qup";
> + reg = <0x0 0x009c0000 0x0 0x6000>;
> + clock-names = "m-ahb", "s-ahb";
> + clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
> + <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + uart2: serial@...000 {
> + compatible = "qcom,geni-debug-uart";
> + reg = <0 0x0098c000 0 0x4000>;
> + clock-names = "se";
> + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&qup_uart3_default>;
> + interrupts = <GIC_SPI 604 IRQ_TYPE_LEVEL_HIGH>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> + };
> +
> + tcsr_mutex: hwlock@...0000 {
> + compatible = "qcom,tcsr-mutex";
> + reg = <0x0 0x01f40000 0x0 0x40000>;
> + #hwlock-cells = <1>;
> + };
> +
> + pdc: interrupt-controller@...0000 {
> + compatible = "qcom,sm8350-pdc", "qcom,pdc";
> + reg = <0 0x0b220000 0 0x30000>, <0 0x17c000f0 0 0x60>;
> + qcom,pdc-ranges = <0 480 40>, <40 140 14>, <54 263 1>, <55 306 4>,
> + <59 312 3>, <62 374 2>, <64 434 2>, <66 438 3>,
> + <69 86 1>, <70 520 54>, <124 609 31>, <155 63 1>,
> + <156 716 12>;
> + #interrupt-cells = <2>;
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + };
> +
> + aoss_qmp: qmp@...0000 {
> + compatible = "qcom,sm8350-aoss-qmp";
> + reg = <0 0x0c300000 0 0x100000>;
> + interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
> + IRQ_TYPE_EDGE_RISING>;
> + mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
> +
> + #clock-cells = <0>;
> + #power-domain-cells = <1>;
> + };
> +
> + tlmm: pinctrl@...0000 {
> + compatible = "qcom,sm8350-pinctrl";
> + reg = <0 0x0f100000 0 0x300000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 203>;
> +
> + qup_uart3_default: qup-uart3-default {
> + mux {
> + pins = "gpio18", "gpio19";
> + function = "qup3";
> + };
> + };
> + };
> +
> + intc: interrupt-controller@...00000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x0 0x17a00000 0x0 0x10000>, /* GICD */
> + <0x0 0x17a60000 0x0 0x100000>; /* GICR * 8 */
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer@...20000 {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x0 0x17c20000 0x0 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@...21000 {
> + frame-number = <0>;
> + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c21000 0x0 0x1000>,
> + <0x0 0x17c22000 0x0 0x1000>;
> + };
> +
> + frame@...23000 {
> + frame-number = <1>;
> + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c23000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...25000 {
> + frame-number = <2>;
> + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c25000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...27000 {
> + frame-number = <3>;
> + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c27000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...29000 {
> + frame-number = <4>;
> + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c29000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...2b000 {
> + frame-number = <5>;
> + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c2b000 0x0 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@...2d000 {
> + frame-number = <6>;
> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> + reg = <0x0 0x17c2d000 0x0 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + apps_rsc: rsc@...00000 {
> + label = "apps_rsc";
> + compatible = "qcom,rpmh-rsc";
> + reg = <0x0 0x18200000 0x0 0x10000>,
> + <0x0 0x18210000 0x0 0x10000>,
> + <0x0 0x18220000 0x0 0x10000>;
> + reg-names = "drv-0", "drv-1", "drv-2";
> + interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,tcs-offset = <0xd00>;
> + qcom,drv-id = <2>;
> + qcom,tcs-config = <ACTIVE_TCS 2>, <SLEEP_TCS 3>,
> + <WAKE_TCS 3>, <CONTROL_TCS 1>;
> +
> + rpmhcc: clock-controller {
> + compatible = "qcom,sm8350-rpmh-clk";
> + #clock-cells = <1>;
> + clock-names = "xo";
> + clocks = <&xo_board>;
> + };
> +
> + };
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> + <GIC_PPI 12 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> + };
> +};
> --
> 2.26.2
>
Powered by blists - more mailing lists