| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201209053459.5515-4-yung-chuan.liao@linux.intel.com>
Date: Wed, 9 Dec 2020 13:34:53 +0800
From: Bard Liao <yung-chuan.liao@...ux.intel.com>
To: alsa-devel@...a-project.org, vkoul@...nel.org
Cc: vinod.koul@...aro.org, linux-kernel@...r.kernel.org, tiwai@...e.de,
broonie@...nel.org, gregkh@...uxfoundation.org, jank@...ence.com,
srinivas.kandagatla@...aro.org, rander.wang@...ux.intel.com,
ranjani.sridharan@...ux.intel.com, hui.wang@...onical.com,
pierre-louis.bossart@...ux.intel.com, sanyog.r.kale@...el.com,
bard.liao@...el.com
Subject: [PATCH v2 3/9] soundwire: bus: use no_pm IO routines for all interrupt handling
From: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
There is no need to play with pm_runtime reference counts, if needed
the codec drivers are already explicitly resumed.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@...ux.intel.com>
Reviewed-by: Rander Wang <rander.wang@...ux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@...ux.intel.com>
---
drivers/soundwire/bus.c | 26 +++++++++++++-------------
1 file changed, 13 insertions(+), 13 deletions(-)
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index b1830032b052..86c339d77a39 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -1295,7 +1295,7 @@ static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
u8 clear, impl_int_mask;
int status, status2, ret, count = 0;
- status = sdw_read(slave, SDW_DP0_INT);
+ status = sdw_read_no_pm(slave, SDW_DP0_INT);
if (status < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", status);
@@ -1334,7 +1334,7 @@ static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
}
/* clear the interrupts but don't touch reserved and SDCA_CASCADE fields */
- ret = sdw_write(slave, SDW_DP0_INT, clear);
+ ret = sdw_write_no_pm(slave, SDW_DP0_INT, clear);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT write failed:%d\n", ret);
@@ -1342,7 +1342,7 @@ static int sdw_handle_dp0_interrupt(struct sdw_slave *slave, u8 *slave_status)
}
/* Read DP0 interrupt again */
- status2 = sdw_read(slave, SDW_DP0_INT);
+ status2 = sdw_read_no_pm(slave, SDW_DP0_INT);
if (status2 < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", status2);
@@ -1373,7 +1373,7 @@ static int sdw_handle_port_interrupt(struct sdw_slave *slave,
return sdw_handle_dp0_interrupt(slave, slave_status);
addr = SDW_DPN_INT(port);
- status = sdw_read(slave, addr);
+ status = sdw_read_no_pm(slave, addr);
if (status < 0) {
dev_err(slave->bus->dev,
"SDW_DPN_INT read failed:%d\n", status);
@@ -1407,7 +1407,7 @@ static int sdw_handle_port_interrupt(struct sdw_slave *slave,
}
/* clear the interrupt but don't touch reserved fields */
- ret = sdw_write(slave, addr, clear);
+ ret = sdw_write_no_pm(slave, addr, clear);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DPN_INT write failed:%d\n", ret);
@@ -1415,7 +1415,7 @@ static int sdw_handle_port_interrupt(struct sdw_slave *slave,
}
/* Read DPN interrupt again */
- status2 = sdw_read(slave, addr);
+ status2 = sdw_read_no_pm(slave, addr);
if (status2 < 0) {
dev_err(slave->bus->dev,
"SDW_DPN_INT read failed:%d\n", status2);
@@ -1457,7 +1457,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
/* Read Intstat 1, Intstat 2 and Intstat 3 registers */
- ret = sdw_read(slave, SDW_SCP_INT1);
+ ret = sdw_read_no_pm(slave, SDW_SCP_INT1);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT1 read failed:%d\n", ret);
@@ -1465,7 +1465,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
buf = ret;
- ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, buf2);
+ ret = sdw_nread_no_pm(slave, SDW_SCP_INTSTAT2, 2, buf2);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT2/3 read failed:%d\n", ret);
@@ -1473,7 +1473,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
if (slave->prop.is_sdca) {
- ret = sdw_read(slave, SDW_DP0_INT);
+ ret = sdw_read_no_pm(slave, SDW_DP0_INT);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", ret);
@@ -1570,7 +1570,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
/* Ack interrupt */
- ret = sdw_write(slave, SDW_SCP_INT1, clear);
+ ret = sdw_write_no_pm(slave, SDW_SCP_INT1, clear);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT1 write failed:%d\n", ret);
@@ -1584,7 +1584,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
* Read status again to ensure no new interrupts arrived
* while servicing interrupts.
*/
- ret = sdw_read(slave, SDW_SCP_INT1);
+ ret = sdw_read_no_pm(slave, SDW_SCP_INT1);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT1 read failed:%d\n", ret);
@@ -1592,7 +1592,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
_buf = ret;
- ret = sdw_nread(slave, SDW_SCP_INTSTAT2, 2, _buf2);
+ ret = sdw_nread_no_pm(slave, SDW_SCP_INTSTAT2, 2, _buf2);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_SCP_INT2/3 read failed:%d\n", ret);
@@ -1600,7 +1600,7 @@ static int sdw_handle_slave_alerts(struct sdw_slave *slave)
}
if (slave->prop.is_sdca) {
- ret = sdw_read(slave, SDW_DP0_INT);
+ ret = sdw_read_no_pm(slave, SDW_DP0_INT);
if (ret < 0) {
dev_err(slave->bus->dev,
"SDW_DP0_INT read failed:%d\n", ret);
--
2.17.1
Powered by blists - more mailing lists