[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201209114440.62950-2-fparent@baylibre.com>
Date: Wed, 9 Dec 2020 12:44:40 +0100
From: Fabien Parent <fparent@...libre.com>
To: Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>
Cc: Fabien Parent <fparent@...libre.com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v2 2/2] 📤 arm64: dts: mediatek: mt8516: add support for APDMA
Add support the APDMA IP on MT8516. APDMA is a DMA controller
for UARTs.
Signed-off-by: Fabien Parent <fparent@...libre.com>
---
V2: Add missing dma-names properties on uart nodes
arch/arm64/boot/dts/mediatek/mt8516.dtsi | 30 ++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8516.dtsi b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
index e6e4d9d60094..b80e95574bef 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8516.dtsi
@@ -276,6 +276,27 @@ gic: interrupt-controller@...10000 {
(GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
};
+ apdma: dma-controller@...00480 {
+ compatible = "mediatek,mt8516-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000480 0 0x80>,
+ <0 0x11000500 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>,
+ <0 0x11000980 0 0x80>,
+ <0 0x11000a00 0 0x80>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 97 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 98 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 99 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 100 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 101 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <6>;
+ clocks = <&topckgen CLK_TOP_APDMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
uart0: serial@...05000 {
compatible = "mediatek,mt8516-uart",
"mediatek,mt6577-uart";
@@ -284,6 +305,9 @@ uart0: serial@...05000 {
clocks = <&topckgen CLK_TOP_UART0_SEL>,
<&topckgen CLK_TOP_UART0>;
clock-names = "baud", "bus";
+ dmas = <&apdma 0
+ &apdma 1>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -295,6 +319,9 @@ uart1: serial@...06000 {
clocks = <&topckgen CLK_TOP_UART1_SEL>,
<&topckgen CLK_TOP_UART1>;
clock-names = "baud", "bus";
+ dmas = <&apdma 2
+ &apdma 3>;
+ dma-names = "tx", "rx";
status = "disabled";
};
@@ -306,6 +333,9 @@ uart2: serial@...07000 {
clocks = <&topckgen CLK_TOP_UART2_SEL>,
<&topckgen CLK_TOP_UART2>;
clock-names = "baud", "bus";
+ dmas = <&apdma 4
+ &apdma 5>;
+ dma-names = "tx", "rx";
status = "disabled";
};
--
2.29.2
Powered by blists - more mailing lists