linux-kernel - Re: [PATCH v1] ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAOMZO5ChsXQk15o4aYf-mTmTVqhFTgKJUNbthnzGtWBhwj9zRw@mail.gmail.com>
Date:   Wed, 9 Dec 2020 11:32:00 -0300
From:   Fabio Estevam <festevam@...il.com>
To:     Oleksij Rempel <o.rempel@...gutronix.de>
Cc:     Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Sascha Hauer <kernel@...gutronix.de>,
        netdev <netdev@...r.kernel.org>,
        "moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" 
        <linux-arm-kernel@...ts.infradead.org>,
        linux-kernel <linux-kernel@...r.kernel.org>,
        NXP Linux Team <linux-imx@....com>,
        David Jander <david@...tonic.nl>,
        Russell King <linux@...linux.org.uk>,
        Philippe Schenker <philippe.schenker@...adex.com>
Subject: Re: [PATCH v1] ARM: imx: mach-imx6ul: remove 14x14 EVK specific PHY fixup

On Wed, Dec 9, 2020 at 9:21 AM Oleksij Rempel <o.rempel@...gutronix.de> wrote:
>
> Remove board specific PHY fixup introduced by commit:
>
> | 709bc0657fe6f9f5 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init")
>
> This fixup addresses boards with a specific configuration: a KSZ8081RNA
> PHY with attached clock source to XI (Pin 8) of the PHY equal to 50MHz.
>
> For the KSZ8081RND PHY, the meaning of the reg 0x1F bit 7 is different
> (compared to the KSZ8081RNA). A set bit means:
>
> - KSZ8081RNA: clock input to XI (Pin 8) is 50MHz for RMII
> - KSZ8081RND: clock input to XI (Pin 8) is 25MHz for RMII
>
> In other configurations, for example a KSZ8081RND PHY or a KSZ8081RNA
> with 25Mhz clock source, the PHY will glitch and stay in not recoverable
> state.
>
> It is not possible to detect the clock source frequency of the PHY. And
> it is not possible to automatically detect KSZ8081 PHY variant - both
> have same PHY ID. It is not possible to overwrite the fixup
> configuration by providing proper device tree description. The only way
> is to remove this fixup.
>
> If this patch breaks network functionality on your board, fix it by
> adding PHY node with following properties:
>
>         ethernet-phy@x {
>                 ...
>                 micrel,led-mode = <1>;
>                 clocks = <&clks IMX6UL_CLK_ENET_REF>;
>                 clock-names = "rmii-ref";
>                 ...
>         };
>
> The board which was referred in the initial patch is already fixed.
> See: arch/arm/boot/dts/imx6ul-14x14-evk.dtsi
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>

Reviewed-by: Fabio Estevam <festevam@...il.com>