| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <990d173c-9b60-5018-9655-abd1482e213f@arm.com>
Date: Thu, 10 Dec 2020 14:34:04 +0000
From: André Przywara <andre.przywara@....com>
To: Icenowy Zheng <icenowy@...c.io>,
Maxime Ripard <mripard@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...l.net>
Cc: Icenowy Zheng <icenowy@...c.xyz>,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...glegroups.com,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Yangtao Li <frank@...winnertech.com>,
linux-kernel@...r.kernel.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-clk@...r.kernel.org
Subject: Re: [linux-sunxi] [PATCH 5/8] clk: sunxi-ng: Add support for the
Allwinner H616 CCU
On 10/12/2020 13:31, Icenowy Zheng wrote:
> 在 2020-12-02星期三的 13:54 +0000，Andre Przywara写道：
>> While the clocks are fairly similar to the H6, many differ in tiny
>> details, so a separate clock driver seems indicated.
>>
>> Derived from the H6 clock driver, and adjusted according to the
>> manual.
>>
>> Signed-off-by: Andre Przywara <andre.przywara@....com>
>> ---
>> drivers/clk/sunxi-ng/Kconfig | 7 +-
>> drivers/clk/sunxi-ng/Makefile | 1 +
>> drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1134
>> +++++++++++++++++++
>> drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 58 +
>> include/dt-bindings/clock/sun50i-h616-ccu.h | 110 ++
>> include/dt-bindings/reset/sun50i-h616-ccu.h | 67 ++
>> 6 files changed, 1376 insertions(+), 1 deletion(-)
>> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.c
>> create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.h
>> create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h
>> create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h
>>
>> diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-
>> ng/Kconfig
>> index ce5f5847d5d3..cd46d8853876 100644
>> --- a/drivers/clk/sunxi-ng/Kconfig
>> +++ b/drivers/clk/sunxi-ng/Kconfig
>> @@ -32,8 +32,13 @@ config SUN50I_H6_CCU
>> default ARM64 && ARCH_SUNXI
>> depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>>
>> +config SUN50I_H616_CCU
>> + bool "Support for the Allwinner H616 CCU"
>> + default ARM64 && ARCH_SUNXI
>> + depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>> +
>> config SUN50I_H6_R_CCU
>> - bool "Support for the Allwinner H6 PRCM CCU"
>> + bool "Support for the Allwinner H6 and H616 PRCM CCU"
>> default ARM64 && ARCH_SUNXI
>> depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
>>
>> diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-
>> ng/Makefile
>> index 3eb5cff40eac..96c324306d97 100644
>> --- a/drivers/clk/sunxi-ng/Makefile
>> +++ b/drivers/clk/sunxi-ng/Makefile
>> @@ -26,6 +26,7 @@ obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-
>> a64.o
>> obj-$(CONFIG_SUN50I_A100_CCU) += ccu-sun50i-a100.o
>> obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o
>> obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o
>> +obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o
>> obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o
>> obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o
>> obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
>> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
>> b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
>> new file mode 100644
>> index 000000000000..3fbb258f0354
>> --- /dev/null
>> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
>> @@ -0,0 +1,1134 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Copyright (c) 2020 Arm Ltd.
>> + * Based on the H6 CCU driver, which is:
>> + * Copyright (c) 2017 Icenowy Zheng <icenowy@...c.io>
>> + */
>> +
>> +#include <linux/clk-provider.h>
>> +#include <linux/io.h>
>> +#include <linux/of_address.h>
>> +#include <linux/platform_device.h>
>> +
>> +#include "ccu_common.h"
>> +#include "ccu_reset.h"
>> +
>> +#include "ccu_div.h"
>> +#include "ccu_gate.h"
>> +#include "ccu_mp.h"
>> +#include "ccu_mult.h"
>> +#include "ccu_nk.h"
>> +#include "ccu_nkm.h"
>> +#include "ccu_nkmp.h"
>> +#include "ccu_nm.h"
>> +
>> +#include "ccu-sun50i-h616.h"
>> +
>> +/*
>> + * The CPU PLL is actually NP clock, with P being /1, /2 or /4.
>> However
>> + * P should only be used for output frequencies lower than 288 MHz.
>> + *
>> + * For now we can just model it as a multiplier clock, and force P
>> to /1.
>> + *
>> + * The M factor is present in the register's description, but not in
>> the
>> + * frequency formula, and it's documented as "M is only used for
>> backdoor
>> + * testing", so it's not modelled and then force to 0.
>> + */
>> +#define SUN50I_H616_PLL_CPUX_REG 0x000
>> +static struct ccu_mult pll_cpux_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .common = {
>> + .reg = 0x000,
>> + .hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
>> + &ccu_mult_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K
>> */
>> +#define SUN50I_H616_PLL_DDR0_REG 0x010
>> +static struct ccu_nkmp pll_ddr0_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
>> + .common = {
>> + .reg = 0x010,
>> + .hw.init = CLK_HW_INIT("pll-ddr0", "osc24M",
>> + &ccu_nkmp_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_DDR1_REG 0x018
>> +static struct ccu_nkmp pll_ddr1_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
>> + .common = {
>> + .reg = 0x018,
>> + .hw.init = CLK_HW_INIT("pll-ddr1", "osc24M",
>> + &ccu_nkmp_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_PERIPH0_REG 0x020
>> +static struct ccu_nkmp pll_periph0_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
>> + .fixed_post_div = 4,
>
> Isn't it 2 here?
>
> The user manual says:
>
> ```
> PLL_PERI0(2X) = 24 MHz*N/M0/M1
> PLL_PERI0(1X) = 24 MHz*N/M0/M1/2
Ouch, you are right, good catch!
I ripped out PLL_PERI0(4X) last minute, but missed that divider.
Thanks!
Andre
> ```
>
> + .common = {
>> + .reg = 0x020,
>> + .features = CCU_FEATURE_FIXED_POSTDIV,
>> + .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
>> + &ccu_nkmp_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_PERIPH1_REG 0x028
>> +static struct ccu_nkmp pll_periph1_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
>> + .fixed_post_div = 4,
>> + .common = {
>> + .reg = 0x028,
>> + .features = CCU_FEATURE_FIXED_POSTDIV,
>> + .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
>> + &ccu_nkmp_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_GPU_REG 0x030
>> +static struct ccu_nkmp pll_gpu_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
>> + .common = {
>> + .reg = 0x030,
>> + .hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
>> + &ccu_nkmp_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +/*
>> + * For Video PLLs, the output divider is described as "used for
>> testing"
>> + * in the user manual. So it's not modelled and forced to 0.
>> + */
>> +#define SUN50I_H616_PLL_VIDEO0_REG 0x040
>> +static struct ccu_nm pll_video0_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .fixed_post_div = 4,
>> + .min_rate = 288000000,
>> + .max_rate = 2400000000UL,
>> + .common = {
>> + .reg = 0x040,
>> + .features = CCU_FEATURE_FIXED_POSTDIV,
>> + .hw.init = CLK_HW_INIT("pll-video0", "osc24M",
>> + &ccu_nm_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_VIDEO1_REG 0x048
>> +static struct ccu_nm pll_video1_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .fixed_post_div = 4,
>> + .min_rate = 288000000,
>> + .max_rate = 2400000000UL,
>> + .common = {
>> + .reg = 0x048,
>> + .features = CCU_FEATURE_FIXED_POSTDIV,
>> + .hw.init = CLK_HW_INIT("pll-video1", "osc24M",
>> + &ccu_nm_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_VIDEO2_REG 0x050
>> +static struct ccu_nm pll_video2_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .fixed_post_div = 4,
>> + .min_rate = 288000000,
>> + .max_rate = 2400000000UL,
>> + .common = {
>> + .reg = 0x050,
>> + .features = CCU_FEATURE_FIXED_POSTDIV,
>> + .hw.init = CLK_HW_INIT("pll-video2", "osc24M",
>> + &ccu_nm_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_VE_REG 0x058
>> +static struct ccu_nkmp pll_ve_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
>> + .common = {
>> + .reg = 0x058,
>> + .hw.init = CLK_HW_INIT("pll-ve", "osc24M",
>> + &ccu_nkmp_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +#define SUN50I_H616_PLL_DE_REG 0x060
>> +static struct ccu_nkmp pll_de_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
>> + .common = {
>> + .reg = 0x060,
>> + .hw.init = CLK_HW_INIT("pll-de", "osc24M",
>> + &ccu_nkmp_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +/*
>> + * TODO: Determine SDM settings for the audio PLL. The manual
>> suggests
>> + * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2,
>> pattern=0xe000c49b
>> + * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3,
>> OUTPUT_DIV=2,
>> + * pattern=0xe001288c for 22.5792 MHz.
>> + * This clashes with our fixed PLL_POST_DIV_P.
>> + */
>> +#define SUN50I_H616_PLL_AUDIO_REG 0x078
>> +static struct ccu_nm pll_audio_hs_clk = {
>> + .enable = BIT(31),
>> + .lock = BIT(28),
>> + .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
>> + .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
>> + .common = {
>> + .reg = 0x078,
>> + .hw.init = CLK_HW_INIT("pll-audio-hs", "osc24M",
>> + &ccu_nm_ops,
>> + CLK_SET_RATE_UNGATE),
>> + },
>> +};
>> +
>> +static const char * const cpux_parents[] = { "osc24M", "osc32k",
>> + "iosc", "pll-cpux", "pll-
>> periph0" };
>> +static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
>> + 0x500, 24, 3, CLK_SET_RATE_PARENT |
>> CLK_IS_CRITICAL);
>> +static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
>> +static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2,
>> 0);
>> +
>> +static const char * const psi_ahb1_ahb2_parents[] = { "osc24M",
>> "osc32k",
>> + "iosc", "pll-
>> periph0" };
>> +static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
>> + psi_ahb1_ahb2_parents,
>> + 0x510,
>> + 0, 2, /* M */
>> + 8, 2, /* P */
>> + 24, 2, /* mux */
>> + 0);
>> +
>> +static const char * const ahb3_apb1_apb2_parents[] = { "osc24M",
>> "osc32k",
>> + "psi-ahb1-ahb2",
>> + "pll-periph0" };
>> +static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3",
>> ahb3_apb1_apb2_parents, 0x51c,
>> + 0, 2, /* M */
>> + 8, 2, /* P */
>> + 24, 2, /* mux */
>> + 0);
>> +
>> +static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1",
>> ahb3_apb1_apb2_parents, 0x520,
>> + 0, 2, /* M */
>> + 8, 2, /* P */
>> + 24, 2, /* mux */
>> + 0);
>> +
>> +static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2",
>> ahb3_apb1_apb2_parents, 0x524,
>> + 0, 2, /* M */
>> + 8, 2, /* P */
>> + 24, 2, /* mux */
>> + 0);
>> +
>> +static const char * const mbus_parents[] = { "osc24M", "pll-periph0-
>> 2x",
>> + "pll-ddr0", "pll-ddr1" };
>> +static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents,
>> 0x540,
>> + 0, 3, /* M */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + CLK_IS_CRITICAL);
>> +
>> +static const char * const de_parents[] = { "pll-de", "pll-periph0-
>> 2x" };
>> +static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
>> + 0, 4, /* M */
>> + 24, 1, /* mux */
>> + BIT(31), /* gate */
>> + CLK_SET_RATE_PARENT);
>> +
>> +static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
>> + 0x60c, BIT(0), 0);
>> +
>> +static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
>> + de_parents,
>> + 0x620,
>> + 0, 4, /* M */
>> + 24, 1, /* mux */
>> + BIT(31), /* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-
>> ahb1-ahb2",
>> + 0x62c, BIT(0), 0);
>> +
>> +static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", de_parents, 0x630,
>> + 0, 4, /* M */
>> + 24, 1, /* mux */
>> + BIT(31), /* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
>> + 0x63c, BIT(0), 0);
>> +
>> +static const char * const gpu0_parents[] = { "pll-gpu", "gpu1" };
>> +static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents,
>> 0x670,
>> + 0, 2, /* M */
>> + 24, 1, /* mux */
>> + BIT(31), /* gate */
>> + CLK_SET_RATE_PARENT);
>> +static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x",
>> 0x674,
>> + 0, 3, /* M */
>> + BIT(31),/* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
>> + 0x67c, BIT(0), 0);
>> +
>> +static const char * const ce_parents[] = { "osc24M", "pll-periph0-
>> 2x" };
>> +static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 1, /* mux */
>> + BIT(31),/* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
>> + 0x68c, BIT(0), 0);
>> +
>> +static const char * const ve_parents[] = { "pll-ve" };
>> +static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
>> + 0, 3, /* M */
>> + 24, 1, /* mux */
>> + BIT(31), /* gate */
>> + CLK_SET_RATE_PARENT);
>> +
>> +static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
>> + 0x69c, BIT(0), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
>> + 0x70c, BIT(0), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-
>> ahb2",
>> + 0x73c, BIT(0), 0);
>> +
>> +static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
>> + 0x78c, BIT(0), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
>> + 0x79c, BIT(0), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0),
>> 0);
>> +
>> +static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc,
>> BIT(0), 0);
>> +
>> +static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1"
>> };
>> +static struct ccu_div dram_clk = {
>> + .div = _SUNXI_CCU_DIV(0, 2),
>> + .mux = _SUNXI_CCU_MUX(24, 2),
>> + .common = {
>> + .reg = 0x800,
>> + .hw.init = CLK_HW_INIT_PARENTS("dram",
>> + dram_parents,
>> + &ccu_div_ops,
>> + CLK_IS_CRITICAL),
>> + },
>> +};
>> +
>> +static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
>> + 0x804, BIT(0), 0);
>> +static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
>> + 0x804, BIT(1), 0);
>> +static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
>> + 0x804, BIT(2), 0);
>> +static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
>> + 0x804, BIT(3), 0);
>> +static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
>> + 0x804, BIT(5), 0);
>> +static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
>> + 0x804, BIT(10), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
>> + 0x80c, BIT(0), CLK_IS_CRITICAL);
>> +
>> +static const char * const nand_spi_parents[] = { "osc24M", "pll-
>> periph0",
>> + "pll-periph1", "pll-
>> periph0-2x",
>> + "pll-periph1-2x" };
>> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0",
>> nand_spi_parents, 0x810,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 3, /* mux */
>> + BIT(31),/* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1",
>> nand_spi_parents, 0x814,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 3, /* mux */
>> + BIT(31),/* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c,
>> BIT(0), 0);
>> +
>> +static const char * const mmc_parents[] = { "osc24M", "pll-periph0-
>> 2x",
>> + "pll-periph1-2x" };
>> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0",
>> mmc_parents, 0x830,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + 2, /* post-div
>> */
>> + 0);
>> +
>> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1",
>> mmc_parents, 0x834,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + 2, /* post-div
>> */
>> + 0);
>> +
>> +static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2",
>> mmc_parents, 0x838,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + 2, /* post-div
>> */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c,
>> BIT(0), 0);
>> +static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c,
>> BIT(1), 0);
>> +static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c,
>> BIT(2), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c,
>> BIT(0), 0);
>> +static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c,
>> BIT(1), 0);
>> +static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c,
>> BIT(2), 0);
>> +static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c,
>> BIT(3), 0);
>> +static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c,
>> BIT(4), 0);
>> +static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2", 0x90c,
>> BIT(5), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c,
>> BIT(0), 0);
>> +static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c,
>> BIT(1), 0);
>> +static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c,
>> BIT(2), 0);
>> +static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c,
>> BIT(3), 0);
>> +static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2", 0x91c,
>> BIT(4), 0);
>> +
>> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0",
>> nand_spi_parents, 0x940,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 3, /* mux */
>> + BIT(31),/* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1",
>> nand_spi_parents, 0x944,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 3, /* mux */
>> + BIT(31),/* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c,
>> BIT(0), 0);
>> +static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c,
>> BIT(1), 0);
>> +
>> +static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
>> + BIT(31) | BIT(30), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_emac0_clk, "bus-emac0", "ahb3", 0x97c,
>> BIT(0), 0);
>> +static SUNXI_CCU_GATE(bus_emac1_clk, "bus-emac1", "ahb3", 0x97c,
>> BIT(1), 0);
>> +
>> +static const char * const ts_parents[] = { "osc24M", "pll-periph0"
>> };
>> +static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
>> + 0, 4, /* M */
>> + 8, 2, /* N */
>> + 24, 1, /* mux */
>> + BIT(31),/* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0),
>> 0);
>> +
>> +static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0),
>> 0);
>> +
>> +static const char * const audio_parents[] = { "pll-audio-1x", "pll-
>> audio-2x",
>> + "pll-audio-4x", "pll-
>> audio-hs" };
>> +static struct ccu_div spdif_clk = {
>> + .enable = BIT(31),
>> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2,
>> CLK_DIVIDER_POWER_OF_TWO),
>> + .mux = _SUNXI_CCU_MUX(24, 2),
>> + .common = {
>> + .reg = 0xa20,
>> + .hw.init = CLK_HW_INIT_PARENTS("spdif",
>> + audio_parents,
>> + &ccu_div_ops,
>> + 0),
>> + },
>> +};
>> +
>> +static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c,
>> BIT(0), 0);
>> +
>> +static struct ccu_div dmic_clk = {
>> + .enable = BIT(31),
>> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2,
>> CLK_DIVIDER_POWER_OF_TWO),
>> + .mux = _SUNXI_CCU_MUX(24, 2),
>> + .common = {
>> + .reg = 0xa40,
>> + .hw.init = CLK_HW_INIT_PARENTS("dmic",
>> + audio_parents,
>> + &ccu_div_ops,
>> + 0),
>> + },
>> +};
>> +
>> +static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c,
>> BIT(0), 0);
>> +
>> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_1x_clk, "audio-codec-
>> 1x",
>> + audio_parents, 0xa50,
>> + 0, 4, /* M */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + CLK_SET_RATE_PARENT);
>> +static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-
>> 4x",
>> + audio_parents, 0xa54,
>> + 0, 4, /* M */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + CLK_SET_RATE_PARENT);
>> +
>> +static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec",
>> "apb1", 0xa5c,
>> + BIT(0), 0);
>> +
>> +static struct ccu_div audio_hub_clk = {
>> + .enable = BIT(31),
>> + .div = _SUNXI_CCU_DIV_FLAGS(8, 2,
>> CLK_DIVIDER_POWER_OF_TWO),
>> + .mux = _SUNXI_CCU_MUX(24, 2),
>> + .common = {
>> + .reg = 0xa60,
>> + .hw.init = CLK_HW_INIT_PARENTS("audio-hub",
>> + audio_parents,
>> + &ccu_div_ops,
>> + 0),
>> + },
>> +};
>> +
>> +static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1",
>> 0xa6c, BIT(0), 0);
>> +
>> +/*
>> + * There are OHCI 12M clock source selection bits for 2 USB 2.0
>> ports.
>> + * We will force them to 0 (12M divided from 48M).
>> + */
>> +#define SUN50I_H616_USB0_CLK_REG 0xa70
>> +#define SUN50I_H616_USB1_CLK_REG 0xa74
>> +#define SUN50I_H616_USB2_CLK_REG 0xa78
>> +#define SUN50I_H616_USB3_CLK_REG 0xa7c
>> +
>> +static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70,
>> BIT(31), 0);
>> +static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70,
>> BIT(29), 0);
>> +
>> +static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74,
>> BIT(31), 0);
>> +static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74,
>> BIT(29), 0);
>> +
>> +static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M", 0xa78,
>> BIT(31), 0);
>> +static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M", 0xa78,
>> BIT(29), 0);
>> +
>> +static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c,
>> BIT(31), 0);
>> +static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc12M", 0xa7c,
>> BIT(29), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c,
>> BIT(0), 0);
>> +static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c,
>> BIT(1), 0);
>> +static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb3", 0xa8c,
>> BIT(2), 0);
>> +static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c,
>> BIT(3), 0);
>> +static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c,
>> BIT(4), 0);
>> +static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c,
>> BIT(5), 0);
>> +static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb3", 0xa8c,
>> BIT(6), 0);
>> +static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c,
>> BIT(7), 0);
>> +static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8),
>> 0);
>> +
>> +static SUNXI_CCU_GATE(bus_keyadc_clk, "bus-keyadc", "apb1", 0xa9c,
>> BIT(0), 0);
>> +
>> +static struct clk_fixed_factor pll_periph0_4x_clk;
>> +
>> +static const char * const hdmi_parents[] = { "pll-video0", "pll-
>> video0-4x",
>> + "pll-video2", "pll-video2-
>> 4x" };
>> +static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents,
>> 0xb00,
>> + 0, 4, /* M */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04,
>> BIT(31), 0);
>> +
>> +static const char * const hdmi_cec_parents[] = { "osc32k", "pll-
>> periph0-2x" };
>> +static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
>> + { .index = 1, .div = 36621 },
>> +};
>> +
>> +#define SUN50I_H616_HDMI_CEC_CLK_REG 0xb10
>> +static struct ccu_mux hdmi_cec_clk = {
>> + .enable = BIT(31),
>> +
>> + .mux = {
>> + .shift = 24,
>> + .width = 2,
>> +
>> + .fixed_predivs = hdmi_cec_predivs,
>> + .n_predivs = ARRAY_SIZE(hdmi_cec_predivs),
>> + },
>> +
>> + .common = {
>> + .reg = 0xb10,
>> + .features = CCU_FEATURE_VARIABLE_PREDIV,
>> + .hw.init = CLK_HW_INIT_PARENTS("hdmi-cec",
>> + hdmi_cec_parents,
>> + &ccu_mux_ops,
>> + 0),
>> + },
>> +};
>> +
>> +static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c,
>> BIT(0), 0);
>> +
>> +static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
>> + 0xb5c, BIT(0), 0);
>> +
>> +static const char * const tcon_tv0_parents[] = { "pll-video0",
>> + "pll-video0-4x",
>> + "pll-video1",
>> + "pll-video1-4x" };
>> +static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
>> + tcon_tv0_parents, 0xb80,
>> + 0, 4, /* M */
>> + 8, 2, /* P */
>> + 24, 3, /* mux */
>> + BIT(31), /* gate */
>> + CLK_SET_RATE_PARENT);
>> +
>> +static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
>> + 0xb9c, BIT(0), 0);
>> +
>> +static const char * const hdcp_parents[] = { "pll-periph0", "pll-
>> periph1" };
>> +static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents,
>> 0xc40,
>> + 0, 4, /* M */
>> + 24, 2, /* mux */
>> + BIT(31), /* gate */
>> + 0);
>> +
>> +static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c,
>> BIT(0), 0);
>> +
>> +/* Fixed factor clocks */
>> +static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1,
>> 0);
>> +
>> +static const struct clk_hw *clk_parent_pll_audio[] = {
>> + &pll_audio_hs_clk.common.hw
>> +};
>> +
>> +/*
>> + * The divider of pll-audio is fixed to 24 for now, so 24576000 and
>> 22579200
>> + * rates can be set exactly in conjunction with sigma-delta
>> modulation.
>> + */
>> +static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x",
>> + clk_parent_pll_audio,
>> + 96, 1, CLK_SET_RATE_PARENT);
>> +static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
>> + clk_parent_pll_audio,
>> + 48, 1, CLK_SET_RATE_PARENT);
>> +static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
>> + clk_parent_pll_audio,
>> + 24, 1, CLK_SET_RATE_PARENT);
>> +
>> +static const struct clk_hw *pll_periph0_parents[] = {
>> + &pll_periph0_clk.common.hw
>> +};
>> +static CLK_FIXED_FACTOR_HWS(pll_periph0_4x_clk, "pll-periph0-4x",
>> + pll_periph0_parents,
>> + 1, 4, 0);
>> +static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
>> + pll_periph0_parents,
>> + 1, 2, 0);
>> +
>> +static const struct clk_hw *pll_periph1_parents[] = {
>> + &pll_periph1_clk.common.hw
>> +};
>> +static CLK_FIXED_FACTOR_HWS(pll_periph1_4x_clk, "pll-periph1-4x",
>> + pll_periph1_parents,
>> + 1, 4, 0);
>> +static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x",
>> + pll_periph1_parents,
>> + 1, 2, 0);
>> +
>> +static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x",
>> + &pll_video0_clk.common.hw,
>> + 1, 4, CLK_SET_RATE_PARENT);
>> +static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x",
>> + &pll_video1_clk.common.hw,
>> + 1, 4, CLK_SET_RATE_PARENT);
>> +static CLK_FIXED_FACTOR_HW(pll_video2_4x_clk, "pll-video2-4x",
>> + &pll_video2_clk.common.hw,
>> + 1, 4, CLK_SET_RATE_PARENT);
>> +
>> +static struct ccu_common *sun50i_h616_ccu_clks[] = {
>> + &pll_cpux_clk.common,
>> + &pll_ddr0_clk.common,
>> + &pll_ddr1_clk.common,
>> + &pll_periph0_clk.common,
>> + &pll_periph1_clk.common,
>> + &pll_gpu_clk.common,
>> + &pll_video0_clk.common,
>> + &pll_video1_clk.common,
>> + &pll_video2_clk.common,
>> + &pll_ve_clk.common,
>> + &pll_de_clk.common,
>> + &pll_audio_hs_clk.common,
>> + &cpux_clk.common,
>> + &axi_clk.common,
>> + &cpux_apb_clk.common,
>> + &psi_ahb1_ahb2_clk.common,
>> + &ahb3_clk.common,
>> + &apb1_clk.common,
>> + &apb2_clk.common,
>> + &mbus_clk.common,
>> + &de_clk.common,
>> + &bus_de_clk.common,
>> + &deinterlace_clk.common,
>> + &bus_deinterlace_clk.common,
>> + &g2d_clk.common,
>> + &bus_g2d_clk.common,
>> + &gpu0_clk.common,
>> + &bus_gpu_clk.common,
>> + &gpu1_clk.common,
>> + &ce_clk.common,
>> + &bus_ce_clk.common,
>> + &ve_clk.common,
>> + &bus_ve_clk.common,
>> + &bus_dma_clk.common,
>> + &bus_hstimer_clk.common,
>> + &avs_clk.common,
>> + &bus_dbg_clk.common,
>> + &bus_psi_clk.common,
>> + &bus_pwm_clk.common,
>> + &bus_iommu_clk.common,
>> + &dram_clk.common,
>> + &mbus_dma_clk.common,
>> + &mbus_ve_clk.common,
>> + &mbus_ce_clk.common,
>> + &mbus_ts_clk.common,
>> + &mbus_nand_clk.common,
>> + &mbus_g2d_clk.common,
>> + &bus_dram_clk.common,
>> + &nand0_clk.common,
>> + &nand1_clk.common,
>> + &bus_nand_clk.common,
>> + &mmc0_clk.common,
>> + &mmc1_clk.common,
>> + &mmc2_clk.common,
>> + &bus_mmc0_clk.common,
>> + &bus_mmc1_clk.common,
>> + &bus_mmc2_clk.common,
>> + &bus_uart0_clk.common,
>> + &bus_uart1_clk.common,
>> + &bus_uart2_clk.common,
>> + &bus_uart3_clk.common,
>> + &bus_uart4_clk.common,
>> + &bus_uart5_clk.common,
>> + &bus_i2c0_clk.common,
>> + &bus_i2c1_clk.common,
>> + &bus_i2c2_clk.common,
>> + &bus_i2c3_clk.common,
>> + &bus_i2c4_clk.common,
>> + &spi0_clk.common,
>> + &spi1_clk.common,
>> + &bus_spi0_clk.common,
>> + &bus_spi1_clk.common,
>> + &emac_25m_clk.common,
>> + &bus_emac0_clk.common,
>> + &bus_emac1_clk.common,
>> + &ts_clk.common,
>> + &bus_ts_clk.common,
>> + &bus_ths_clk.common,
>> + &spdif_clk.common,
>> + &bus_spdif_clk.common,
>> + &dmic_clk.common,
>> + &bus_dmic_clk.common,
>> + &audio_codec_1x_clk.common,
>> + &audio_codec_4x_clk.common,
>> + &bus_audio_codec_clk.common,
>> + &audio_hub_clk.common,
>> + &bus_audio_hub_clk.common,
>> + &usb_ohci0_clk.common,
>> + &usb_phy0_clk.common,
>> + &usb_ohci1_clk.common,
>> + &usb_phy1_clk.common,
>> + &usb_ohci2_clk.common,
>> + &usb_phy2_clk.common,
>> + &usb_ohci3_clk.common,
>> + &usb_phy3_clk.common,
>> + &bus_ohci0_clk.common,
>> + &bus_ohci1_clk.common,
>> + &bus_ohci2_clk.common,
>> + &bus_ohci3_clk.common,
>> + &bus_ehci0_clk.common,
>> + &bus_ehci1_clk.common,
>> + &bus_ehci2_clk.common,
>> + &bus_ehci3_clk.common,
>> + &bus_otg_clk.common,
>> + &bus_keyadc_clk.common,
>> + &hdmi_clk.common,
>> + &hdmi_slow_clk.common,
>> + &hdmi_cec_clk.common,
>> + &bus_hdmi_clk.common,
>> + &bus_tcon_top_clk.common,
>> + &tcon_tv0_clk.common,
>> + &bus_tcon_tv0_clk.common,
>> + &hdcp_clk.common,
>> + &bus_hdcp_clk.common,
>> +};
>> +
>> +static struct clk_hw_onecell_data sun50i_h616_hw_clks = {
>> + .hws = {
>> + [CLK_OSC12M] = &osc12M_clk.hw,
>> + [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
>> + [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
>> + [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
>> + [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
>> + [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
>> + [CLK_PLL_PERIPH0_4X] = &pll_periph0_4x_clk.hw,
>> + [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
>> + [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
>> + [CLK_PLL_PERIPH1_4X] = &pll_periph1_4x_clk.hw,
>> + [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
>> + [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
>> + [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
>> + [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
>> + [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
>> + [CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw,
>> + [CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw,
>> + [CLK_PLL_VE] = &pll_ve_clk.common.hw,
>> + [CLK_PLL_DE] = &pll_de_clk.common.hw,
>> + [CLK_PLL_AUDIO_HS] =
>> &pll_audio_hs_clk.common.hw,
>> + [CLK_PLL_AUDIO_1X] = &pll_audio_1x_clk.hw,
>> + [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
>> + [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
>> + [CLK_CPUX] = &cpux_clk.common.hw,
>> + [CLK_AXI] = &axi_clk.common.hw,
>> + [CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
>> + [CLK_PSI_AHB1_AHB2] =
>> &psi_ahb1_ahb2_clk.common.hw,
>> + [CLK_AHB3] = &ahb3_clk.common.hw,
>> + [CLK_APB1] = &apb1_clk.common.hw,
>> + [CLK_APB2] = &apb2_clk.common.hw,
>> + [CLK_MBUS] = &mbus_clk.common.hw,
>> + [CLK_DE] = &de_clk.common.hw,
>> + [CLK_BUS_DE] = &bus_de_clk.common.hw,
>> + [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
>> + [CLK_BUS_DEINTERLACE] =
>> &bus_deinterlace_clk.common.hw,
>> + [CLK_G2D] = &g2d_clk.common.hw,
>> + [CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
>> + [CLK_GPU0] = &gpu0_clk.common.hw,
>> + [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
>> + [CLK_GPU1] = &gpu1_clk.common.hw,
>> + [CLK_CE] = &ce_clk.common.hw,
>> + [CLK_BUS_CE] = &bus_ce_clk.common.hw,
>> + [CLK_VE] = &ve_clk.common.hw,
>> + [CLK_BUS_VE] = &bus_ve_clk.common.hw,
>> + [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
>> + [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
>> + [CLK_AVS] = &avs_clk.common.hw,
>> + [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
>> + [CLK_BUS_PSI] = &bus_psi_clk.common.hw,
>> + [CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
>> + [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
>> + [CLK_DRAM] = &dram_clk.common.hw,
>> + [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
>> + [CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
>> + [CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
>> + [CLK_MBUS_TS] = &mbus_ts_clk.common.hw,
>> + [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
>> + [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
>> + [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
>> + [CLK_NAND0] = &nand0_clk.common.hw,
>> + [CLK_NAND1] = &nand1_clk.common.hw,
>> + [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
>> + [CLK_MMC0] = &mmc0_clk.common.hw,
>> + [CLK_MMC1] = &mmc1_clk.common.hw,
>> + [CLK_MMC2] = &mmc2_clk.common.hw,
>> + [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
>> + [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
>> + [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
>> + [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
>> + [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
>> + [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
>> + [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
>> + [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
>> + [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
>> + [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
>> + [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
>> + [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
>> + [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
>> + [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
>> + [CLK_SPI0] = &spi0_clk.common.hw,
>> + [CLK_SPI1] = &spi1_clk.common.hw,
>> + [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
>> + [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
>> + [CLK_EMAC_25M] = &emac_25m_clk.common.hw,
>> + [CLK_BUS_EMAC0] = &bus_emac0_clk.common.hw,
>> + [CLK_BUS_EMAC1] = &bus_emac1_clk.common.hw,
>> + [CLK_TS] = &ts_clk.common.hw,
>> + [CLK_BUS_TS] = &bus_ts_clk.common.hw,
>> + [CLK_BUS_THS] = &bus_ths_clk.common.hw,
>> + [CLK_SPDIF] = &spdif_clk.common.hw,
>> + [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
>> + [CLK_DMIC] = &dmic_clk.common.hw,
>> + [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
>> + [CLK_AUDIO_CODEC_1X] =
>> &audio_codec_1x_clk.common.hw,
>> + [CLK_AUDIO_CODEC_4X] =
>> &audio_codec_4x_clk.common.hw,
>> + [CLK_BUS_AUDIO_CODEC] =
>> &bus_audio_codec_clk.common.hw,
>> + [CLK_AUDIO_HUB] = &audio_hub_clk.common.hw,
>> + [CLK_BUS_AUDIO_HUB] =
>> &bus_audio_hub_clk.common.hw,
>> + [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
>> + [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
>> + [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
>> + [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
>> + [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
>> + [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
>> + [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
>> + [CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
>> + [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
>> + [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
>> + [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
>> + [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
>> + [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
>> + [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
>> + [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
>> + [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
>> + [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
>> + [CLK_BUS_KEYADC] = &bus_keyadc_clk.common.hw,
>> + [CLK_HDMI] = &hdmi_clk.common.hw,
>> + [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
>> + [CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw,
>> + [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
>> + [CLK_BUS_TCON_TOP] =
>> &bus_tcon_top_clk.common.hw,
>> + [CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
>> + [CLK_BUS_TCON_TV0] =
>> &bus_tcon_tv0_clk.common.hw,
>> + [CLK_HDCP] = &hdcp_clk.common.hw,
>> + [CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw,
>> + },
>> + .num = CLK_NUMBER,
>> +};
>> +
>> +static struct ccu_reset_map sun50i_h616_ccu_resets[] = {
>> + [RST_MBUS] = { 0x540, BIT(30) },
>> +
>> + [RST_BUS_DE] = { 0x60c, BIT(16) },
>> + [RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) },
>> + [RST_BUS_GPU] = { 0x67c, BIT(16) },
>> + [RST_BUS_CE] = { 0x68c, BIT(16) },
>> + [RST_BUS_VE] = { 0x69c, BIT(16) },
>> + [RST_BUS_DMA] = { 0x70c, BIT(16) },
>> + [RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
>> + [RST_BUS_DBG] = { 0x78c, BIT(16) },
>> + [RST_BUS_PSI] = { 0x79c, BIT(16) },
>> + [RST_BUS_PWM] = { 0x7ac, BIT(16) },
>> + [RST_BUS_IOMMU] = { 0x7bc, BIT(16) },
>> + [RST_BUS_DRAM] = { 0x80c, BIT(16) },
>> + [RST_BUS_NAND] = { 0x82c, BIT(16) },
>> + [RST_BUS_MMC0] = { 0x84c, BIT(16) },
>> + [RST_BUS_MMC1] = { 0x84c, BIT(17) },
>> + [RST_BUS_MMC2] = { 0x84c, BIT(18) },
>> + [RST_BUS_UART0] = { 0x90c, BIT(16) },
>> + [RST_BUS_UART1] = { 0x90c, BIT(17) },
>> + [RST_BUS_UART2] = { 0x90c, BIT(18) },
>> + [RST_BUS_UART3] = { 0x90c, BIT(19) },
>> + [RST_BUS_UART4] = { 0x90c, BIT(20) },
>> + [RST_BUS_UART5] = { 0x90c, BIT(21) },
>> + [RST_BUS_I2C0] = { 0x91c, BIT(16) },
>> + [RST_BUS_I2C1] = { 0x91c, BIT(17) },
>> + [RST_BUS_I2C2] = { 0x91c, BIT(18) },
>> + [RST_BUS_I2C3] = { 0x91c, BIT(19) },
>> + [RST_BUS_I2C4] = { 0x91c, BIT(20) },
>> + [RST_BUS_SPI0] = { 0x96c, BIT(16) },
>> + [RST_BUS_SPI1] = { 0x96c, BIT(17) },
>> + [RST_BUS_EMAC0] = { 0x97c, BIT(16) },
>> + [RST_BUS_EMAC1] = { 0x97c, BIT(17) },
>> + [RST_BUS_TS] = { 0x9bc, BIT(16) },
>> + [RST_BUS_THS] = { 0x9fc, BIT(16) },
>> + [RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
>> + [RST_BUS_DMIC] = { 0xa4c, BIT(16) },
>> + [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
>> + [RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) },
>> +
>> + [RST_USB_PHY0] = { 0xa70, BIT(30) },
>> + [RST_USB_PHY1] = { 0xa74, BIT(30) },
>> + [RST_USB_PHY2] = { 0xa78, BIT(30) },
>> + [RST_USB_PHY3] = { 0xa7c, BIT(30) },
>> +
>> + [RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
>> + [RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
>> + [RST_BUS_OHCI2] = { 0xa8c, BIT(18) },
>> + [RST_BUS_OHCI3] = { 0xa8c, BIT(19) },
>> + [RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
>> + [RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
>> + [RST_BUS_EHCI2] = { 0xa8c, BIT(22) },
>> + [RST_BUS_EHCI3] = { 0xa8c, BIT(23) },
>> + [RST_BUS_OTG] = { 0xa8c, BIT(24) },
>> + [RST_BUS_KEYADC] = { 0xa9c, BIT(16) },
>> +
>> + [RST_BUS_HDMI] = { 0xb1c, BIT(16) },
>> + [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
>> + [RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) },
>> + [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
>> + [RST_BUS_HDCP] = { 0xc4c, BIT(16) },
>> +};
>> +
>> +static const struct sunxi_ccu_desc sun50i_h616_ccu_desc = {
>> + .ccu_clks = sun50i_h616_ccu_clks,
>> + .num_ccu_clks = ARRAY_SIZE(sun50i_h616_ccu_clks),
>> +
>> + .hw_clks = &sun50i_h616_hw_clks,
>> +
>> + .resets = sun50i_h616_ccu_resets,
>> + .num_resets = ARRAY_SIZE(sun50i_h616_ccu_resets),
>> +};
>> +
>> +static const u32 pll_regs[] = {
>> + SUN50I_H616_PLL_CPUX_REG,
>> + SUN50I_H616_PLL_DDR0_REG,
>> + SUN50I_H616_PLL_DDR1_REG,
>> + SUN50I_H616_PLL_PERIPH0_REG,
>> + SUN50I_H616_PLL_PERIPH1_REG,
>> + SUN50I_H616_PLL_GPU_REG,
>> + SUN50I_H616_PLL_VIDEO0_REG,
>> + SUN50I_H616_PLL_VIDEO1_REG,
>> + SUN50I_H616_PLL_VIDEO2_REG,
>> + SUN50I_H616_PLL_VE_REG,
>> + SUN50I_H616_PLL_DE_REG,
>> + SUN50I_H616_PLL_AUDIO_REG,
>> +};
>> +
>> +static const u32 pll_video_regs[] = {
>> + SUN50I_H616_PLL_VIDEO0_REG,
>> + SUN50I_H616_PLL_VIDEO1_REG,
>> + SUN50I_H616_PLL_VIDEO2_REG,
>> +};
>> +
>> +static const u32 usb2_clk_regs[] = {
>> + SUN50I_H616_USB0_CLK_REG,
>> + SUN50I_H616_USB1_CLK_REG,
>> + SUN50I_H616_USB2_CLK_REG,
>> + SUN50I_H616_USB3_CLK_REG,
>> +};
>> +
>> +static int sun50i_h616_ccu_probe(struct platform_device *pdev)
>> +{
>> + struct resource *res;
>> + void __iomem *reg;
>> + u32 val;
>> + int i;
>> +
>> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> + reg = devm_ioremap_resource(&pdev->dev, res);
>> + if (IS_ERR(reg))
>> + return PTR_ERR(reg);
>> +
>> + /* Enable the lock bits on all PLLs */
>> + for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
>> + val = readl(reg + pll_regs[i]);
>> + val |= BIT(29);
>> + writel(val, reg + pll_regs[i]);
>> + }
>> +
>> + /*
>> + * Force the output divider of video PLLs to 0.
>> + *
>> + * See the comment before pll-video0 definition for the reason.
>> + */
>> + for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
>> + val = readl(reg + pll_video_regs[i]);
>> + val &= ~BIT(0);
>> + writel(val, reg + pll_video_regs[i]);
>> + }
>> +
>> + /*
>> + * Force OHCI 12M clock sources to 00 (12MHz divided from
>> 48MHz)
>> + *
>> + * This clock mux is still mysterious, and the code just
>> enforces
>> + * it to have a valid clock parent.
>> + */
>> + for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
>> + val = readl(reg + usb2_clk_regs[i]);
>> + val &= ~GENMASK(25, 24);
>> + writel (val, reg + usb2_clk_regs[i]);
>> + }
>> +
>> + /*
>> + * Force the post-divider of pll-audio to 12 and the output
>> divider
>> + * of it to 2, so 24576000 and 22579200 rates can be set
>> exactly.
>> + */
>> + val = readl(reg + SUN50I_H616_PLL_AUDIO_REG);
>> + val &= ~(GENMASK(21, 16) | BIT(0));
>> + writel(val | (11 << 16) | BIT(0), reg +
>> SUN50I_H616_PLL_AUDIO_REG);
>> +
>> + /*
>> + * First clock parent (osc32K) is unusable for CEC. But since
>> there
>> + * is no good way to force parent switch (both run with same
>> frequency),
>> + * just set second clock parent here.
>> + */
>> + val = readl(reg + SUN50I_H616_HDMI_CEC_CLK_REG);
>> + val |= BIT(24);
>> + writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG);
>> +
>> + return sunxi_ccu_probe(pdev->dev.of_node, reg,
>> &sun50i_h616_ccu_desc);
>> +}
>> +
>> +static const struct of_device_id sun50i_h616_ccu_ids[] = {
>> + { .compatible = "allwinner,sun50i-h616-ccu",
>> + .data = &sun50i_h616_ccu_desc },
>> + { }
>> +};
>> +
>> +static struct platform_driver sun50i_h616_ccu_driver = {
>> + .probe = sun50i_h616_ccu_probe,
>> + .driver = {
>> + .name = "sun50i-h616-ccu",
>> + .of_match_table = sun50i_h616_ccu_ids,
>> + },
>> +};
>> +builtin_platform_driver(sun50i_h616_ccu_driver);
>> diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
>> b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
>> new file mode 100644
>> index 000000000000..da8f0b1206f9
>> --- /dev/null
>> +++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
>> @@ -0,0 +1,58 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Copyright 2020 Arm Ltd.
>> + */
>> +
>> +#ifndef _CCU_SUN50I_H616_H_
>> +#define _CCU_SUN50I_H616_H_
>> +
>> +#include <dt-bindings/clock/sun50i-h616-ccu.h>
>> +#include <dt-bindings/reset/sun50i-h616-ccu.h>
>> +
>> +#define CLK_OSC12M 0
>> +#define CLK_PLL_CPUX 1
>> +#define CLK_PLL_DDR0 2
>> +#define CLK_PLL_DDR1 3
>> +
>> +/* PLL_PERIPH0 exported for PRCM */
>> +
>> +#define CLK_PLL_PERIPH0_2X 5
>> +#define CLK_PLL_PERIPH0_4X 6
>> +#define CLK_PLL_PERIPH1 7
>> +#define CLK_PLL_PERIPH1_2X 8
>> +#define CLK_PLL_PERIPH1_4X 9
>> +#define CLK_PLL_GPU 10
>> +#define CLK_PLL_VIDEO0 11
>> +#define CLK_PLL_VIDEO0_4X 12
>> +#define CLK_PLL_VIDEO1 13
>> +#define CLK_PLL_VIDEO1_4X 14
>> +#define CLK_PLL_VIDEO2 15
>> +#define CLK_PLL_VIDEO2_4X 16
>> +#define CLK_PLL_VE 17
>> +#define CLK_PLL_DE 18
>> +#define CLK_PLL_AUDIO_HS 19
>> +#define CLK_PLL_AUDIO_1X 20
>> +#define CLK_PLL_AUDIO_2X 21
>> +#define CLK_PLL_AUDIO_4X 22
>> +
>> +/* CPUX clock exported for DVFS */
>> +
>> +#define CLK_AXI 24
>> +#define CLK_CPUX_APB 25
>> +#define CLK_PSI_AHB1_AHB2 26
>> +#define CLK_AHB3 27
>> +
>> +/* APB1 clock exported for PIO */
>> +
>> +#define CLK_APB2 29
>> +#define CLK_MBUS 30
>> +
>> +/* All module clocks and bus gates are exported except DRAM */
>> +
>> +#define CLK_DRAM 51
>> +
>> +#define CLK_BUS_DRAM 58
>> +
>> +#define CLK_NUMBER (CLK_BUS_HDCP + 1)
>> +
>> +#endif /* _CCU_SUN50I_H616_H_ */
>> diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h
>> b/include/dt-bindings/clock/sun50i-h616-ccu.h
>> new file mode 100644
>> index 000000000000..a9cc8844e3a9
>> --- /dev/null
>> +++ b/include/dt-bindings/clock/sun50i-h616-ccu.h
>> @@ -0,0 +1,110 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
>> +/*
>> + * Copyright (C) 2020 Arm Ltd.
>> + */
>> +
>> +#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_
>> +#define _DT_BINDINGS_CLK_SUN50I_H616_H_
>> +
>> +#define CLK_PLL_PERIPH0 4
>> +
>> +#define CLK_CPUX 23
>> +
>> +#define CLK_APB1 28
>> +
>> +#define CLK_DE 31
>> +#define CLK_BUS_DE 32
>> +#define CLK_DEINTERLACE 33
>> +#define CLK_BUS_DEINTERLACE 34
>> +#define CLK_G2D 35
>> +#define CLK_BUS_G2D 36
>> +#define CLK_GPU0 37
>> +#define CLK_BUS_GPU 38
>> +#define CLK_GPU1 39
>> +#define CLK_CE 40
>> +#define CLK_BUS_CE 41
>> +#define CLK_VE 42
>> +#define CLK_BUS_VE 43
>> +#define CLK_BUS_DMA 44
>> +#define CLK_BUS_HSTIMER 45
>> +#define CLK_AVS 46
>> +#define CLK_BUS_DBG 47
>> +#define CLK_BUS_PSI 48
>> +#define CLK_BUS_PWM 49
>> +#define CLK_BUS_IOMMU 50
>> +
>> +#define CLK_MBUS_DMA 52
>> +#define CLK_MBUS_VE 53
>> +#define CLK_MBUS_CE 54
>> +#define CLK_MBUS_TS 55
>> +#define CLK_MBUS_NAND 56
>> +#define CLK_MBUS_G2D 57
>> +
>> +#define CLK_NAND0 59
>> +#define CLK_NAND1 60
>> +#define CLK_BUS_NAND 61
>> +#define CLK_MMC0 62
>> +#define CLK_MMC1 63
>> +#define CLK_MMC2 64
>> +#define CLK_BUS_MMC0 65
>> +#define CLK_BUS_MMC1 66
>> +#define CLK_BUS_MMC2 67
>> +#define CLK_BUS_UART0 68
>> +#define CLK_BUS_UART1 69
>> +#define CLK_BUS_UART2 70
>> +#define CLK_BUS_UART3 71
>> +#define CLK_BUS_UART4 72
>> +#define CLK_BUS_UART5 73
>> +#define CLK_BUS_I2C0 74
>> +#define CLK_BUS_I2C1 75
>> +#define CLK_BUS_I2C2 76
>> +#define CLK_BUS_I2C3 77
>> +#define CLK_BUS_I2C4 78
>> +#define CLK_SPI0 79
>> +#define CLK_SPI1 80
>> +#define CLK_BUS_SPI0 81
>> +#define CLK_BUS_SPI1 82
>> +#define CLK_EMAC_25M 83
>> +#define CLK_BUS_EMAC0 84
>> +#define CLK_BUS_EMAC1 85
>> +#define CLK_TS 86
>> +#define CLK_BUS_TS 87
>> +#define CLK_BUS_THS 88
>> +#define CLK_SPDIF 89
>> +#define CLK_BUS_SPDIF 90
>> +#define CLK_DMIC 91
>> +#define CLK_BUS_DMIC 92
>> +#define CLK_AUDIO_CODEC_1X 93
>> +#define CLK_AUDIO_CODEC_4X 94
>> +#define CLK_BUS_AUDIO_CODEC 95
>> +#define CLK_AUDIO_HUB 96
>> +#define CLK_BUS_AUDIO_HUB 97
>> +#define CLK_USB_OHCI0 98
>> +#define CLK_USB_PHY0 99
>> +#define CLK_USB_OHCI1 100
>> +#define CLK_USB_PHY1 101
>> +#define CLK_USB_OHCI2 102
>> +#define CLK_USB_PHY2 103
>> +#define CLK_USB_OHCI3 104
>> +#define CLK_USB_PHY3 105
>> +#define CLK_BUS_OHCI0 106
>> +#define CLK_BUS_OHCI1 107
>> +#define CLK_BUS_OHCI2 108
>> +#define CLK_BUS_OHCI3 109
>> +#define CLK_BUS_EHCI0 110
>> +#define CLK_BUS_EHCI1 111
>> +#define CLK_BUS_EHCI2 112
>> +#define CLK_BUS_EHCI3 113
>> +#define CLK_BUS_OTG 114
>> +#define CLK_BUS_KEYADC 115
>> +#define CLK_HDMI 116
>> +#define CLK_HDMI_SLOW 117
>> +#define CLK_HDMI_CEC 118
>> +#define CLK_BUS_HDMI 119
>> +#define CLK_BUS_TCON_TOP 120
>> +#define CLK_TCON_TV0 121
>> +#define CLK_BUS_TCON_TV0 122
>> +#define CLK_HDCP 123
>> +#define CLK_BUS_HDCP 124
>> +
>> +#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
>> diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h
>> b/include/dt-bindings/reset/sun50i-h616-ccu.h
>> new file mode 100644
>> index 000000000000..1c992cfbbbab
>> --- /dev/null
>> +++ b/include/dt-bindings/reset/sun50i-h616-ccu.h
>> @@ -0,0 +1,67 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
>> +/*
>> + * Copyright (C) 2017 Icenowy Zheng <icenowy@...c.io>
>> + */
>> +
>> +#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_
>> +#define _DT_BINDINGS_RESET_SUN50I_H616_H_
>> +
>> +#define RST_MBUS 0
>> +#define RST_BUS_DE 1
>> +#define RST_BUS_DEINTERLACE 2
>> +#define RST_BUS_GPU 3
>> +#define RST_BUS_CE 4
>> +#define RST_BUS_VE 5
>> +#define RST_BUS_DMA 6
>> +#define RST_BUS_HSTIMER 7
>> +#define RST_BUS_DBG 8
>> +#define RST_BUS_PSI 9
>> +#define RST_BUS_PWM 10
>> +#define RST_BUS_IOMMU 11
>> +#define RST_BUS_DRAM 12
>> +#define RST_BUS_NAND 13
>> +#define RST_BUS_MMC0 14
>> +#define RST_BUS_MMC1 15
>> +#define RST_BUS_MMC2 16
>> +#define RST_BUS_UART0 17
>> +#define RST_BUS_UART1 18
>> +#define RST_BUS_UART2 19
>> +#define RST_BUS_UART3 20
>> +#define RST_BUS_UART4 21
>> +#define RST_BUS_UART5 22
>> +#define RST_BUS_I2C0 23
>> +#define RST_BUS_I2C1 24
>> +#define RST_BUS_I2C2 25
>> +#define RST_BUS_I2C3 26
>> +#define RST_BUS_I2C4 27
>> +#define RST_BUS_SPI0 28
>> +#define RST_BUS_SPI1 29
>> +#define RST_BUS_EMAC0 30
>> +#define RST_BUS_EMAC1 31
>> +#define RST_BUS_TS 32
>> +#define RST_BUS_THS 33
>> +#define RST_BUS_SPDIF 34
>> +#define RST_BUS_DMIC 35
>> +#define RST_BUS_AUDIO_CODEC 36
>> +#define RST_BUS_AUDIO_HUB 37
>> +#define RST_USB_PHY0 38
>> +#define RST_USB_PHY1 39
>> +#define RST_USB_PHY2 40
>> +#define RST_USB_PHY3 41
>> +#define RST_BUS_OHCI0 42
>> +#define RST_BUS_OHCI1 43
>> +#define RST_BUS_OHCI2 44
>> +#define RST_BUS_OHCI3 45
>> +#define RST_BUS_EHCI0 46
>> +#define RST_BUS_EHCI1 47
>> +#define RST_BUS_EHCI2 48
>> +#define RST_BUS_EHCI3 49
>> +#define RST_BUS_OTG 50
>> +#define RST_BUS_HDMI 51
>> +#define RST_BUS_HDMI_SUB 52
>> +#define RST_BUS_TCON_TOP 53
>> +#define RST_BUS_TCON_TV0 54
>> +#define RST_BUS_HDCP 55
>> +#define RST_BUS_KEYADC 56
>> +
>> +#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */
>> --
>> 2.17.5
>>
Powered by blists - more mailing lists