linux-kernel - Re: [PATCH v3 1/3] dt-bindings: input: atmel_mxt_ts: Document atmel,wakeup-method and wake-GPIO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <ea36d902-b158-981a-f144-2878784bf079@gmail.com>
Date:   Thu, 10 Dec 2020 12:57:45 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Rob Herring <robh@...nel.org>
Cc:     Nick Dyer <nick@...anahar.org>,
        Dmitry Torokhov <dmitry.torokhov@...il.com>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Jiada Wang <jiada_wang@...tor.com>,
        linux-input@...r.kernel.org, devicetree@...r.kernel.org,
        linux-tegra@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 1/3] dt-bindings: input: atmel_mxt_ts: Document
 atmel,wakeup-method and wake-GPIO

10.12.2020 06:44, Rob Herring пишет:
> On Mon, Dec 07, 2020 at 12:22:15AM +0300, Dmitry Osipenko wrote:
>> Some Atmel touchscreen controllers have a WAKE line that needs to be
>> asserted low in order to wake up controller from a deep sleep. Document
>> the wakeup methods and the wake-GPIO properties.
> 
> wake-GPIO?

The "wake-gpios" is the new property and it has "maxItems: 1", hence the
wake-GPIO.

>>
>> Reviewed-by: Linus Walleij <linus.walleij@...aro.org>
>> Signed-off-by: Dmitry Osipenko <digetx@...il.com>
>> ---
>>  .../bindings/input/atmel,maxtouch.yaml        | 29 +++++++++++++++++++
>>  include/dt-bindings/input/atmel-maxtouch.h    | 10 +++++++
>>  2 files changed, 39 insertions(+)
>>  create mode 100644 include/dt-bindings/input/atmel-maxtouch.h
>>
>> diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>> index 8c6418f76e94..e6b03a1e7c30 100644
>> --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>> +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.yaml
>> @@ -39,6 +39,13 @@ properties:
>>        (active low). The line must be flagged with
>>        GPIO_ACTIVE_LOW.
>>  
>> +  wake-gpios:
>> +    maxItems: 1
>> +    description:
>> +      Optional GPIO specifier for the touchscreen's wake pin
>> +      (active low). The line must be flagged with
>> +      GPIO_ACTIVE_LOW.
>> +
>>    linux,gpio-keymap:
>>      $ref: /schemas/types.yaml#/definitions/uint32-array
>>      description: |
>> @@ -53,6 +60,26 @@ properties:
>>        or experiment to determine which bit corresponds to which input. Use
>>        KEY_RESERVED for unused padding values.
>>  
>> +  atmel,wakeup-method:
>> +    $ref: /schemas/types.yaml#/definitions/uint32
>> +    description: |
>> +      The WAKE line is an active-low input that is used to wake up the touch
>> +      controller from deep-sleep mode before communication with the controller
>> +      could be started. This optional feature used to minimize current
>> +      consumption when the controller is in deep sleep mode. This feature is
>> +      relevant only to some controller families, like mXT1386 controller for
>> +      example.
>> +
>> +      The WAKE pin can be connected in one of the following ways:
>> +       1) left permanently low
>> +       2) connected to the I2C-compatible SCL pin
>> +       3) connected to a GPIO pin on the host
>> +    enum:
>> +      - 0 # ATMEL_MXT_WAKEUP_NONE
>> +      - 1 # ATMEL_MXT_WAKEUP_I2C_SCL
>> +      - 2 # ATMEL_MXT_WAKEUP_GPIO
>> +    default: 0
>> +
>>  required:
>>    - compatible
>>    - reg
>> @@ -63,6 +90,7 @@ additionalProperties: false
>>  examples:
>>    - |
>>      #include <dt-bindings/interrupt-controller/irq.h>
>> +    #include <dt-bindings/input/atmel-maxtouch.h>
>>      #include <dt-bindings/gpio/gpio.h>
>>      i2c {
>>        #address-cells = <1>;
>> @@ -75,6 +103,7 @@ examples:
>>          reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
>>          vdda-supply = <&ab8500_ldo_aux2_reg>;
>>          vdd-supply = <&ab8500_ldo_aux5_reg>;
>> +        atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
>>        };
>>      };
>>  
>> diff --git a/include/dt-bindings/input/atmel-maxtouch.h b/include/dt-bindings/input/atmel-maxtouch.h
>> new file mode 100644
>> index 000000000000..7345ab32224d
>> --- /dev/null
>> +++ b/include/dt-bindings/input/atmel-maxtouch.h
>> @@ -0,0 +1,10 @@
>> +/* SPDX-License-Identifier: GPL-2.0+ */
>> +
>> +#ifndef _DT_BINDINGS_ATMEL_MAXTOUCH_H
>> +#define _DT_BINDINGS_ATMEL_MAXTOUCH_H
>> +
>> +#define ATMEL_MXT_WAKEUP_NONE		0
>> +#define ATMEL_MXT_WAKEUP_I2C_SCL	1
>> +#define ATMEL_MXT_WAKEUP_GPIO		2
>> +
>> +#endif /* _DT_BINDINGS_ATMEL_MAXTOUCH_H */
>> -- 
>> 2.29.2
>>