| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 10 Dec 2020 01:22:27 +0000
From: "Sia, Jee Heng" <jee.heng.sia@...el.com>
To: Rob Herring <robh@...nel.org>
CC: "vkoul@...nel.org" <vkoul@...nel.org>,
"Eugeniy.Paltsev@...opsys.com" <Eugeniy.Paltsev@...opsys.com>,
"andriy.shevchenko@...ux.intel.com"
<andriy.shevchenko@...ux.intel.com>,
"dmaengine@...r.kernel.org" <dmaengine@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
Subject: RE: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas for
dw-axi-dmac
Hi Rob,
I think I still need the 'ref', but can remove the 'allOf'.
Thanks
Regards
Jee Heng
> -----Original Message-----
> From: Sia, Jee Heng
> Sent: 09 December 2020 11:21 AM
> To: Rob Herring <robh@...nel.org>
> Cc: vkoul@...nel.org; Eugeniy.Paltsev@...opsys.com;
> andriy.shevchenko@...ux.intel.com; dmaengine@...r.kernel.org;
> linux-kernel@...r.kernel.org; devicetree@...r.kernel.org
> Subject: RE: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas
> for dw-axi-dmac
>
> Hi Rob,
>
> Regarding the comment " You don't need to use allOf with a $ref
> anymore."
> I get dt compile error after remove the allOf and $ref. Error message
> shown below:
> '$ref' is a required property
> 'allOf' is a required property
>
> snps,dma-masters:
> description: |
> Number of AXI masters supported by the hardware.
> enum: [1, 2]
> default: 2
>
> Thanks
> Regards
> Jee Heng
>
> > -----Original Message-----
> > From: Rob Herring <robh@...nel.org>
> > Sent: 01 December 2020 6:26 AM
> > To: Sia, Jee Heng <jee.heng.sia@...el.com>
> > Cc: vkoul@...nel.org; Eugeniy.Paltsev@...opsys.com;
> > andriy.shevchenko@...ux.intel.com; dmaengine@...r.kernel.org;
> > linux-kernel@...r.kernel.org; devicetree@...r.kernel.org
> > Subject: Re: [PATCH v5 01/16] dt-bindings: dma: Add YAML schemas
> for
> > dw-axi-dmac
> >
> > On Mon, Nov 23, 2020 at 10:34:37AM +0800, Sia Jee Heng wrote:
> > > YAML schemas Device Tree (DT) binding is the new format for DT
> to
> > > replace the old format. Introduce YAML schemas DT binding for
> > > dw-axi-dmac and remove the old version.
> > >
> > > Signed-off-by: Sia Jee Heng <jee.heng.sia@...el.com>
> > > ---
> > > .../bindings/dma/snps,dw-axi-dmac.txt | 39 ------
> > > .../bindings/dma/snps,dw-axi-dmac.yaml | 126
> > ++++++++++++++++++
> > > 2 files changed, 126 insertions(+), 39 deletions(-) delete mode
> > > 100644 Documentation/devicetree/bindings/dma/snps,dw-axi-
> > dmac.txt
> > > create mode 100644
> > > Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.yaml
> > >
> > > diff --git
> > > a/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > > b/Documentation/devicetree/bindings/dma/snps,dw-axi-dmac.txt
> > > deleted file mode 100644
> > > index dbe160400adc..000000000000
> > > --- a/Documentation/devicetree/bindings/dma/snps,dw-axi-
> > dmac.txt
> > > +++ /dev/null
> > > @@ -1,39 +0,0 @@
> > > -Synopsys DesignWare AXI DMA Controller
> > > -
> > > -Required properties:
> > > -- compatible: "snps,axi-dma-1.01a"
> > > -- reg: Address range of the DMAC registers. This should include
> > > - all of the per-channel registers.
> > > -- interrupt: Should contain the DMAC interrupt number.
> > > -- dma-channels: Number of channels supported by hardware.
> > > -- snps,dma-masters: Number of AXI masters supported by the
> > hardware.
> > > -- snps,data-width: Maximum AXI data width supported by
> hardware.
> > > - (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > > -- snps,priority: Priority of channel. Array size is equal to the
> > > number of
> > > - dma-channels. Priority value must be programmed within
> > > [0:dma-channels-1]
> > > - range. (0 - minimum priority)
> > > -- snps,block-size: Maximum block size supported by the controller
> > channel.
> > > - Array size is equal to the number of dma-channels.
> > > -
> > > -Optional properties:
> > > -- snps,axi-max-burst-len: Restrict master AXI burst length by value
> > > specified
> > > - in this property. If this property is missing the maximum AXI
> > > burst length
> > > - supported by DMAC is used. [1:256]
> > > -
> > > -Example:
> > > -
> > > -dmac: dma-controller@...00 {
> > > - compatible = "snps,axi-dma-1.01a";
> > > - reg = <0x80000 0x400>;
> > > - clocks = <&core_clk>, <&cfgr_clk>;
> > > - clock-names = "core-clk", "cfgr-clk";
> > > - interrupt-parent = <&intc>;
> > > - interrupts = <27>;
> > > -
> > > - dma-channels = <4>;
> > > - snps,dma-masters = <2>;
> > > - snps,data-width = <3>;
> > > - snps,block-size = <4096 4096 4096 4096>;
> > > - snps,priority = <0 1 2 3>;
> > > - snps,axi-max-burst-len = <16>;
> > > -};
> > > diff --git
> > > a/Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.yaml
> > > b/Documentation/devicetree/bindings/dma/snps,dw-axi-
> dmac.yaml
> > > new file mode 100644
> > > index 000000000000..6c2e8e612af5
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/dma/snps,dw-axi-
> > dmac.yaml
> > > @@ -0,0 +1,126 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> %YAML
> > 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/dma/snps,dw-axi-
> dmac.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Synopsys DesignWare AXI DMA Controller
> > > +
> > > +maintainers:
> > > + - Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com
> > > +
> > > +description: |
> >
> > Don't need '|' unless there's formatting to preserve.
> >
> > > + Synopsys DesignWare AXI DMA Controller DT Binding
> >
> > And should be 2 space indent.
> >
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - snps,axi-dma-1.01a
> > > +
> > > + reg:
> > > + items:
> > > + - description: Address range of the DMAC registers
> >
> > Just 'maxItems: 1'
> >
> > > +
> > > + reg-names:
> > > + items:
> > > + - const: axidma_ctrl_regs
> > > +
> > > + interrupts:
> > > + maxItems: 1
> > > +
> > > + clocks:
> > > + items:
> > > + - description: Bus Clock
> > > + - description: Module Clock
> > > +
> > > + clock-names:
> > > + items:
> > > + - const: core-clk
> > > + - const: cfgr-clk
> > > +
> > > + '#dma-cells':
> > > + const: 1
> > > +
> > > + dma-channels:
> > > + description: |
> > > + Number of channels supported by hardware.
> >
> > No need to describe a common property. You do need to provide
> some
> > constraints. I'd assume there's less than 2^32 channels.
> >
> > > +
> > > + snps,dma-masters:
> > > + description: |
> > > + Number of AXI masters supported by the hardware.
> > > + allOf:
> >
> > You don't need to use allOf with a $ref anymore.
> >
> > > + - $ref: /schemas/types.yaml#/definitions/uint32
> > > + - enum: [1, 2]
> > > + default: 2
> > > +
> > > + snps,data-width:
> > > + description: |
> > > + AXI data width supported by hardware.
> > > + (0 - 8bits, 1 - 16bits, 2 - 32bits, ..., 6 - 512bits)
> > > + allOf:
> > > + - $ref: /schemas/types.yaml#/definitions/uint32
> > > + - enum: [0, 1, 2, 3, 4, 5, 6]
> > > + default: 4
> > > +
> > > + snps,priority:
> > > + description: |
> > > + Channel priority specifier associated with the DMA channels.
> > > + allOf:
> > > + - $ref: /schemas/types.yaml#/definitions/uint32-array
> > > + - minItems: 1
> > > + maxItems: 8
> > > + default: [0, 1, 2, 3]
> > > +
> > > + snps,block-size:
> > > + description: |
> > > + Channel block size specifier associated with the DMA
> channels.
> > > + allOf:
> > > + - $ref: /schemas/types.yaml#/definitions/uint32-array
> > > + - minItems: 1
> > > + maxItems: 8
> > > + default: [4096, 4096, 4096, 4096]
> > > +
> > > + snps,axi-max-burst-len:
> > > + description: |
> > > + Restrict master AXI burst length by value specified in this
> > property.
> > > + If this property is missing the maximum AXI burst length
> > supported by
> > > + DMAC is used. [1:256]
> >
> > Looks like some constraints.
> >
> > > + allOf:
> > > + - $ref: /schemas/types.yaml#/definitions/uint32
> > > + default: 16
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - clocks
> > > + - clock-names
> > > + - interrupts
> > > + - '#dma-cells'
> > > + - dma-channels
> > > + - snps,dma-masters
> > > + - snps,data-width
> > > + - snps,priority
> > > + - snps,block-size
> > > +
> > > +additionalProperties: false
> > > +
> > > +examples:
> > > + - |
> > > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > > + #include <dt-bindings/interrupt-controller/irq.h>
> > > + /* example with snps,dw-axi-dmac */
> > > + dmac: dma-controller@...00 {
> > > + compatible = "snps,axi-dma-1.01a";
> > > + reg = <0x80000 0x400>;
> > > + clocks = <&core_clk>, <&cfgr_clk>;
> > > + clock-names = "core-clk", "cfgr-clk";
> > > + interrupt-parent = <&intc>;
> > > + interrupts = <27>;
> > > + #dma-cells = <1>;
> > > + dma-channels = <4>;
> > > + snps,dma-masters = <2>;
> > > + snps,data-width = <3>;
> > > + snps,block-size = <4096 4096 4096 4096>;
> > > + snps,priority = <0 1 2 3>;
> > > + snps,axi-max-burst-len = <16>;
> > > + };
> > > --
> > > 2.18.0
> > >
Powered by blists - more mailing lists