[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1607721363-8879-3-git-send-email-skomatineni@nvidia.com>
Date: Fri, 11 Dec 2020 13:15:56 -0800
From: Sowjanya Komatineni <skomatineni@...dia.com>
To: <thierry.reding@...il.com>, <jonathanh@...dia.com>,
<broonie@...nel.org>, <robh+dt@...nel.org>, <lukas@...ner.de>
CC: <skomatineni@...dia.com>, <bbrezillon@...nel.org>,
<p.yadav@...com>, <tudor.ambarus@...rochip.com>,
<linux-spi@...r.kernel.org>, <linux-tegra@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>
Subject: [PATCH v3 2/9] dt-bindings: spi: Add Tegra Quad SPI device tree binding
This patch adds YAML based device tree binding document for Tegra
Quad SPI driver.
Signed-off-by: Sowjanya Komatineni <skomatineni@...dia.com>
---
.../bindings/spi/nvidia,tegra210-quad.yaml | 130 +++++++++++++++++++++
1 file changed, 130 insertions(+)
create mode 100644 Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
new file mode 100644
index 0000000..0b5fea6
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra210-quad.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/nvidia,tegra210-quad.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Tegra Quad SPI Controller
+
+maintainers:
+ - Thierry Reding <thierry.reding@...il.com>
+ - Jonathan Hunter <jonathanh@...dia.com>
+
+properties:
+ compatible:
+ enum:
+ - nvidia,tegra210-qspi
+ - nvidia,tegra186-qspi
+ - nvidia,tegra194-qspi
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: qspi
+ - const: qspi_out
+
+ clocks:
+ maxItems: 2
+
+ resets:
+ maxItems: 1
+
+ dmas:
+ maxItems: 2
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
+patternProperties:
+ "^.*@[0-9a-f]+":
+ type: object
+
+ properties:
+ compatible:
+ description:
+ Compatible of the SPI device.
+
+ reg:
+ maxItems: 1
+
+ spi-max-frequency:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Maximum Quad SPI clocking speed of the device in Hz.
+
+ spi-rx-bus-width:
+ description:
+ Bus width to the Quad SPI bus used for read transfers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4]
+
+ spi-tx-bus-width:
+ description:
+ Bus width to the Quad SPI bus used for write transfers.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [1, 2, 4]
+
+ nvidia,tx-clk-tap-delay:
+ description:
+ Delays the clock going out to device with this tap value.
+ Tap value varies based on platform design trace lengths from Tegra
+ QSPI to corresponding slave device.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 31
+
+ nvidia,rx-clk-tap-delay:
+ description:
+ Delays the clock coming in from the device with this tap value.
+ Tap value varies based on platform design trace lengths from Tegra
+ QSPI to corresponding slave device.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 255
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clock-names
+ - clocks
+ - resets
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/clock/tegra210-car.h>
+ #include <dt-bindings/reset/tegra210-car.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ spi@...10000 {
+ compatible = "nvidia,tegra210-qspi";
+ reg = <0x70410000 0x1000>;
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&tegra_car TEGRA210_CLK_QSPI>,
+ <&tegra_car TEGRA210_CLK_QSPI_PM>;
+ clock-names = "qspi", "qspi_out";
+ resets = <&tegra_car 211>;
+ dmas = <&apbdma 5>, <&apbdma 5>;
+ dma-names = "rx", "tx";
+
+ flash@0 {
+ compatible = "spi-nor";
+ reg = <0>;
+ spi-max-frequency = <104000000>;
+ spi-tx-bus-width = <2>;
+ spi-rx-bus-width = <2>;
+ };
+ };
--
2.7.4
Powered by blists - more mailing lists