| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201211221006.1052453-5-robh@kernel.org>
Date: Fri, 11 Dec 2020 16:10:06 -0600
From: Rob Herring <robh@...nel.org>
To: Lakshmi Ramasubramanian <nramas@...ux.microsoft.com>,
takahiro.akashi@...aro.org, will@...nel.org,
catalin.marinas@....com, mpe@...erman.id.au
Cc: Thiago Jung Bauermann <bauerman@...ux.ibm.com>,
zohar@...ux.ibm.com, james.morse@....com, sashal@...nel.org,
benh@...nel.crashing.org, paulus@...ba.org, frowand.list@...il.com,
vincenzo.frascino@....com, mark.rutland@....com,
dmitry.kasatkin@...il.com, jmorris@...ei.org, serge@...lyn.com,
pasha.tatashin@...een.com, allison@...utok.net,
masahiroy@...nel.org, bhsharma@...hat.com, mbrugger@...e.com,
hsinyi@...omium.org, tao.li@...o.com, christophe.leroy@....fr,
linux-integrity@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
prsriva@...ux.microsoft.com, balajib@...ux.microsoft.com
Subject: [RFC PATCH 4/4] powerpc: Use common of_kexec_setup_new_fdt()
Signed-off-by: Rob Herring <robh@...nel.org>
---
After the IMA changes, delete_fdt_mem_rsv() can also be removed.
arch/powerpc/kexec/file_load.c | 125 ++-------------------------------
1 file changed, 6 insertions(+), 119 deletions(-)
diff --git a/arch/powerpc/kexec/file_load.c b/arch/powerpc/kexec/file_load.c
index e452b11df631..956bcb2d1ec2 100644
--- a/arch/powerpc/kexec/file_load.c
+++ b/arch/powerpc/kexec/file_load.c
@@ -16,6 +16,7 @@
#include <linux/slab.h>
#include <linux/kexec.h>
+#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/libfdt.h>
#include <asm/setup.h>
@@ -156,132 +157,18 @@ int setup_new_fdt(const struct kimage *image, void *fdt,
unsigned long initrd_load_addr, unsigned long initrd_len,
const char *cmdline)
{
- int ret, chosen_node;
- const void *prop;
-
- /* Remove memory reservation for the current device tree. */
- ret = delete_fdt_mem_rsv(fdt, __pa(initial_boot_params),
- fdt_totalsize(initial_boot_params));
- if (ret == 0)
- pr_debug("Removed old device tree reservation.\n");
- else if (ret != -ENOENT)
- return ret;
-
- chosen_node = fdt_path_offset(fdt, "/chosen");
- if (chosen_node == -FDT_ERR_NOTFOUND) {
- chosen_node = fdt_add_subnode(fdt, fdt_path_offset(fdt, "/"),
- "chosen");
- if (chosen_node < 0) {
- pr_err("Error creating /chosen.\n");
- return -EINVAL;
- }
- } else if (chosen_node < 0) {
- pr_err("Malformed device tree: error reading /chosen.\n");
- return -EINVAL;
- }
-
- /* Did we boot using an initrd? */
- prop = fdt_getprop(fdt, chosen_node, "linux,initrd-start", NULL);
- if (prop) {
- uint64_t tmp_start, tmp_end, tmp_size;
-
- tmp_start = fdt64_to_cpu(*((const fdt64_t *) prop));
-
- prop = fdt_getprop(fdt, chosen_node, "linux,initrd-end", NULL);
- if (!prop) {
- pr_err("Malformed device tree.\n");
- return -EINVAL;
- }
- tmp_end = fdt64_to_cpu(*((const fdt64_t *) prop));
-
- /*
- * kexec reserves exact initrd size, while firmware may
- * reserve a multiple of PAGE_SIZE, so check for both.
- */
- tmp_size = tmp_end - tmp_start;
- ret = delete_fdt_mem_rsv(fdt, tmp_start, tmp_size);
- if (ret == -ENOENT)
- ret = delete_fdt_mem_rsv(fdt, tmp_start,
- round_up(tmp_size, PAGE_SIZE));
- if (ret == 0)
- pr_debug("Removed old initrd reservation.\n");
- else if (ret != -ENOENT)
- return ret;
-
- /* If there's no new initrd, delete the old initrd's info. */
- if (initrd_len == 0) {
- ret = fdt_delprop(fdt, chosen_node,
- "linux,initrd-start");
- if (ret) {
- pr_err("Error deleting linux,initrd-start.\n");
- return -EINVAL;
- }
-
- ret = fdt_delprop(fdt, chosen_node, "linux,initrd-end");
- if (ret) {
- pr_err("Error deleting linux,initrd-end.\n");
- return -EINVAL;
- }
- }
- }
-
- if (initrd_len) {
- ret = fdt_setprop_u64(fdt, chosen_node,
- "linux,initrd-start",
- initrd_load_addr);
- if (ret < 0)
- goto err;
-
- /* initrd-end is the first address after the initrd image. */
- ret = fdt_setprop_u64(fdt, chosen_node, "linux,initrd-end",
- initrd_load_addr + initrd_len);
- if (ret < 0)
- goto err;
-
- ret = fdt_add_mem_rsv(fdt, initrd_load_addr, initrd_len);
- if (ret) {
- pr_err("Error reserving initrd memory: %s\n",
- fdt_strerror(ret));
- return -EINVAL;
- }
- }
-
- if (cmdline != NULL) {
- ret = fdt_setprop_string(fdt, chosen_node, "bootargs", cmdline);
- if (ret < 0)
- goto err;
- } else {
- ret = fdt_delprop(fdt, chosen_node, "bootargs");
- if (ret && ret != -FDT_ERR_NOTFOUND) {
- pr_err("Error deleting bootargs.\n");
- return -EINVAL;
- }
- }
+ int ret;
- if (image->type == KEXEC_TYPE_CRASH) {
- /*
- * Avoid elfcorehdr from being stomped on in kdump kernel by
- * setting up memory reserve map.
- */
- ret = fdt_add_mem_rsv(fdt, image->arch.elf_headers_mem,
- image->arch.elf_headers_sz);
- if (ret) {
- pr_err("Error reserving elfcorehdr memory: %s\n",
- fdt_strerror(ret));
- goto err;
- }
- }
+ ret = of_kexec_setup_new_fdt(image, fdt, initrd_load_addr, initrd_len, cmdline);
+ if (ret)
+ goto err;
- ret = setup_ima_buffer(image, fdt, chosen_node);
+ ret = setup_ima_buffer(image, fdt, fdt_path_offset(fdt, "/chosen"));
if (ret) {
pr_err("Error setting up the new device tree.\n");
return ret;
}
- ret = fdt_setprop(fdt, chosen_node, "linux,booted-from-kexec", NULL, 0);
- if (ret)
- goto err;
-
return 0;
err:
--
2.25.1
Powered by blists - more mailing lists