linux-kernel - Re: [PATCH] driver: aspeed: g6: Fix PWMG0 pinctrl setting

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <D9745FBC-BEA7-421E-B56C-21EA9AAE094E@aspeedtech.com>
Date:   Fri, 11 Dec 2020 11:00:48 +0000
From:   Billy Tsai <billy_tsai@...eedtech.com>
To:     Joel Stanley <joel@....id.au>
CC:     Andrew Jeffery <andrew@...id.au>,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-aspeed <linux-aspeed@...ts.ozlabs.org>,
        OpenBMC Maillist <openbmc@...ts.ozlabs.org>,
        "open list:GPIO SUBSYSTEM" <linux-gpio@...r.kernel.org>,
        Linux ARM <linux-arm-kernel@...ts.infradead.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        BMC-SW <BMC-SW@...eedtech.com>
Subject: Re: [PATCH] driver: aspeed: g6: Fix PWMG0 pinctrl setting

Hi Joel,

On 2020/12/11, 6:55 PM, Joel Stanley wrote:

    On Fri, 11 Dec 2020 at 03:18, Billy Tsai <billy_tsai@...eedtech.com> wrote:
    >
    > The SCU offset for signal PWM8 in group PWM8G0 is wrong, fix it from
    > SCU414 to SCU4B4.
    > Besides that, When PWM8~15 of PWMG0 set it needs to clear SCU414 bits at
    > the same time.
    >
    > Fixes: 2eda1cdec49f ("pinctrl: aspeed: Add AST2600 pinmux support")
    >
    > Signed-off-by: Billy Tsai <billy_tsai@...eedtech.com>
    > ---
    >  drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c | 26 ++++++++++++++--------
    >  1 file changed, 17 insertions(+), 9 deletions(-)
    >
    > diff --git a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > index 34803a6c7664..6e61f045936f 100644
    > --- a/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > +++ b/drivers/pinctrl/aspeed/pinctrl-aspeed-g6.c
    > @@ -346,50 +346,58 @@ FUNC_GROUP_DECL(RGMII4, F24, E23, E24, E25, D26, D24, C25, C26, C24, B26, B25,
    >  FUNC_GROUP_DECL(RMII4, F24, E23, E24, E25, C25, C24, B26, B25, B24);
    >
    >  #define D22 40
    > -SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8));
    > -SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU414, 8));
    > +SIG_EXPR_LIST_DECL_SESG(D22, SD1CLK, SD1, SIG_DESC_SET(SCU414, 8))
    
    Is this missing a semicolon?

Yes, thanks for your check. I will send v2 to fix it.
    
    > +SIG_EXPR_LIST_DECL_SEMG(D22, PWM8, PWM8G0, PWM8, SIG_DESC_SET(SCU4B4, 8),
    > +                       SIG_DESC_CLEAR(SCU414, 8));