| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201211011934.6171-8-andre.przywara@arm.com>
Date: Fri, 11 Dec 2020 01:19:20 +0000
From: Andre Przywara <andre.przywara@....com>
To: Maxime Ripard <mripard@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...l.net>
Cc: Icenowy Zheng <icenowy@...c.xyz>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh@...nel.org>,
Clément Péron <peron.clem@...il.com>,
Shuosheng Huang <huangshuosheng@...winnertech.com>,
Yangtao Li <tiny.windzz@...il.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
linux-clk@...r.kernel.org
Subject: [PATCH v2 07/21] clk: sunxi-ng: Add support for the Allwinner H616 CCU
While the clocks are fairly similar to the H6, many differ in tiny
details, so a separate clock driver seems indicated.
Derived from the H6 clock driver, and adjusted according to the manual.
Signed-off-by: Andre Przywara <andre.przywara@....com>
---
drivers/clk/sunxi-ng/Kconfig | 5 +
drivers/clk/sunxi-ng/Makefile | 1 +
drivers/clk/sunxi-ng/ccu-sun50i-h616.c | 1150 +++++++++++++++++++
drivers/clk/sunxi-ng/ccu-sun50i-h616.h | 56 +
include/dt-bindings/clock/sun50i-h616-ccu.h | 115 ++
include/dt-bindings/reset/sun50i-h616-ccu.h | 70 ++
6 files changed, 1397 insertions(+)
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.c
create mode 100644 drivers/clk/sunxi-ng/ccu-sun50i-h616.h
create mode 100644 include/dt-bindings/clock/sun50i-h616-ccu.h
create mode 100644 include/dt-bindings/reset/sun50i-h616-ccu.h
diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
index feeb8d2074ee..cd46d8853876 100644
--- a/drivers/clk/sunxi-ng/Kconfig
+++ b/drivers/clk/sunxi-ng/Kconfig
@@ -32,6 +32,11 @@ config SUN50I_H6_CCU
default ARM64 && ARCH_SUNXI
depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+config SUN50I_H616_CCU
+ bool "Support for the Allwinner H616 CCU"
+ default ARM64 && ARCH_SUNXI
+ depends on (ARM64 && ARCH_SUNXI) || COMPILE_TEST
+
config SUN50I_H6_R_CCU
bool "Support for the Allwinner H6 and H616 PRCM CCU"
default ARM64 && ARCH_SUNXI
diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
index 3eb5cff40eac..96c324306d97 100644
--- a/drivers/clk/sunxi-ng/Makefile
+++ b/drivers/clk/sunxi-ng/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_SUN50I_A64_CCU) += ccu-sun50i-a64.o
obj-$(CONFIG_SUN50I_A100_CCU) += ccu-sun50i-a100.o
obj-$(CONFIG_SUN50I_A100_R_CCU) += ccu-sun50i-a100-r.o
obj-$(CONFIG_SUN50I_H6_CCU) += ccu-sun50i-h6.o
+obj-$(CONFIG_SUN50I_H616_CCU) += ccu-sun50i-h616.o
obj-$(CONFIG_SUN50I_H6_R_CCU) += ccu-sun50i-h6-r.o
obj-$(CONFIG_SUN4I_A10_CCU) += ccu-sun4i-a10.o
obj-$(CONFIG_SUN5I_CCU) += ccu-sun5i.o
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.c b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
new file mode 100644
index 000000000000..19db5636a80d
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.c
@@ -0,0 +1,1150 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 Arm Ltd.
+ * Based on the H6 CCU driver, which is:
+ * Copyright (c) 2017 Icenowy Zheng <icenowy@...c.io>
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+#include "ccu_common.h"
+#include "ccu_reset.h"
+
+#include "ccu_div.h"
+#include "ccu_gate.h"
+#include "ccu_mp.h"
+#include "ccu_mult.h"
+#include "ccu_nk.h"
+#include "ccu_nkm.h"
+#include "ccu_nkmp.h"
+#include "ccu_nm.h"
+
+#include "ccu-sun50i-h616.h"
+
+/*
+ * The CPU PLL is actually NP clock, with P being /1, /2 or /4. However
+ * P should only be used for output frequencies lower than 288 MHz.
+ *
+ * For now we can just model it as a multiplier clock, and force P to /1.
+ *
+ * The M factor is present in the register's description, but not in the
+ * frequency formula, and it's documented as "M is only used for backdoor
+ * testing", so it's not modelled and then force to 0.
+ */
+#define SUN50I_H616_PLL_CPUX_REG 0x000
+static struct ccu_mult pll_cpux_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .mult = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .common = {
+ .reg = 0x000,
+ .hw.init = CLK_HW_INIT("pll-cpux", "osc24M",
+ &ccu_mult_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+/* Some PLLs are input * N / div1 / P. Model them as NKMP with no K */
+#define SUN50I_H616_PLL_DDR0_REG 0x010
+static struct ccu_nkmp pll_ddr0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x010,
+ .hw.init = CLK_HW_INIT("pll-ddr0", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_DDR1_REG 0x018
+static struct ccu_nkmp pll_ddr1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x018,
+ .hw.init = CLK_HW_INIT("pll-ddr1", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_PERIPH0_REG 0x020
+static struct ccu_nkmp pll_periph0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x020,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph0", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_PERIPH1_REG 0x028
+static struct ccu_nkmp pll_periph1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .fixed_post_div = 2,
+ .common = {
+ .reg = 0x028,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-periph1", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_GPU_REG 0x030
+static struct ccu_nkmp pll_gpu_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x030,
+ .hw.init = CLK_HW_INIT("pll-gpu", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+/*
+ * For Video PLLs, the output divider is described as "used for testing"
+ * in the user manual. So it's not modelled and forced to 0.
+ */
+#define SUN50I_H616_PLL_VIDEO0_REG 0x040
+static struct ccu_nm pll_video0_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .fixed_post_div = 4,
+ .min_rate = 288000000,
+ .max_rate = 2400000000UL,
+ .common = {
+ .reg = 0x040,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-video0", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_VIDEO1_REG 0x048
+static struct ccu_nm pll_video1_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .fixed_post_div = 4,
+ .min_rate = 288000000,
+ .max_rate = 2400000000UL,
+ .common = {
+ .reg = 0x048,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-video1", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_VIDEO2_REG 0x050
+static struct ccu_nm pll_video2_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .fixed_post_div = 4,
+ .min_rate = 288000000,
+ .max_rate = 2400000000UL,
+ .common = {
+ .reg = 0x050,
+ .features = CCU_FEATURE_FIXED_POSTDIV,
+ .hw.init = CLK_HW_INIT("pll-video2", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_VE_REG 0x058
+static struct ccu_nkmp pll_ve_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x058,
+ .hw.init = CLK_HW_INIT("pll-ve", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+#define SUN50I_H616_PLL_DE_REG 0x060
+static struct ccu_nkmp pll_de_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .p = _SUNXI_CCU_DIV(0, 1), /* output divider */
+ .common = {
+ .reg = 0x060,
+ .hw.init = CLK_HW_INIT("pll-de", "osc24M",
+ &ccu_nkmp_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+/*
+ * TODO: Determine SDM settings for the audio PLL. The manual suggests
+ * PLL_FACTOR_N=16, PLL_POST_DIV_P=2, OUTPUT_DIV=2, pattern=0xe000c49b
+ * for 24.576 MHz, and PLL_FACTOR_N=22, PLL_POST_DIV_P=3, OUTPUT_DIV=2,
+ * pattern=0xe001288c for 22.5792 MHz.
+ * This clashes with our fixed PLL_POST_DIV_P.
+ */
+#define SUN50I_H616_PLL_AUDIO_REG 0x078
+static struct ccu_nm pll_audio_hs_clk = {
+ .enable = BIT(31),
+ .lock = BIT(28),
+ .n = _SUNXI_CCU_MULT_MIN(8, 8, 12),
+ .m = _SUNXI_CCU_DIV(1, 1), /* input divider */
+ .common = {
+ .reg = 0x078,
+ .hw.init = CLK_HW_INIT("pll-audio-hs", "osc24M",
+ &ccu_nm_ops,
+ CLK_SET_RATE_UNGATE),
+ },
+};
+
+static const char * const cpux_parents[] = { "osc24M", "osc32k",
+ "iosc", "pll-cpux", "pll-periph0" };
+static SUNXI_CCU_MUX(cpux_clk, "cpux", cpux_parents,
+ 0x500, 24, 3, CLK_SET_RATE_PARENT | CLK_IS_CRITICAL);
+static SUNXI_CCU_M(axi_clk, "axi", "cpux", 0x500, 0, 2, 0);
+static SUNXI_CCU_M(cpux_apb_clk, "cpux-apb", "cpux", 0x500, 8, 2, 0);
+
+static const char * const psi_ahb1_ahb2_parents[] = { "osc24M", "osc32k",
+ "iosc", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(psi_ahb1_ahb2_clk, "psi-ahb1-ahb2",
+ psi_ahb1_ahb2_parents,
+ 0x510,
+ 0, 2, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static const char * const ahb3_apb1_apb2_parents[] = { "osc24M", "osc32k",
+ "psi-ahb1-ahb2",
+ "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX(ahb3_clk, "ahb3", ahb3_apb1_apb2_parents, 0x51c,
+ 0, 2, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb1_clk, "apb1", ahb3_apb1_apb2_parents, 0x520,
+ 0, 2, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX(apb2_clk, "apb2", ahb3_apb1_apb2_parents, 0x524,
+ 0, 2, /* M */
+ 8, 2, /* P */
+ 24, 2, /* mux */
+ 0);
+
+static const char * const mbus_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-ddr0", "pll-ddr1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(mbus_clk, "mbus", mbus_parents, 0x540,
+ 0, 3, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ CLK_IS_CRITICAL);
+
+static const char * const de_parents[] = { "pll-de", "pll-periph0-2x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(de_clk, "de", de_parents, 0x600,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_de_clk, "bus-de", "psi-ahb1-ahb2",
+ 0x60c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(deinterlace_clk, "deinterlace",
+ de_parents,
+ 0x620,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_deinterlace_clk, "bus-deinterlace", "psi-ahb1-ahb2",
+ 0x62c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(g2d_clk, "g2d", de_parents, 0x630,
+ 0, 4, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_g2d_clk, "bus-g2d", "psi-ahb1-ahb2",
+ 0x63c, BIT(0), 0);
+
+static const char * const gpu0_parents[] = { "pll-gpu", "gpu1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(gpu0_clk, "gpu0", gpu0_parents, 0x670,
+ 0, 2, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_GATE(gpu1_clk, "gpu1", "pll-periph0-2x", 0x674,
+ 0, 2, /* M */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_gpu_clk, "bus-gpu", "psi-ahb1-ahb2",
+ 0x67c, BIT(0), 0);
+
+static const char * const ce_parents[] = { "osc24M", "pll-periph0-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ce_clk, "ce", ce_parents, 0x680,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 1, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_ce_clk, "bus-ce", "psi-ahb1-ahb2",
+ 0x68c, BIT(0), 0);
+
+static const char * const ve_parents[] = { "pll-ve" };
+static SUNXI_CCU_M_WITH_MUX_GATE(ve_clk, "ve", ve_parents, 0x690,
+ 0, 3, /* M */
+ 24, 1, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_ve_clk, "bus-ve", "psi-ahb1-ahb2",
+ 0x69c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_dma_clk, "bus-dma", "psi-ahb1-ahb2",
+ 0x70c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_hstimer_clk, "bus-hstimer", "psi-ahb1-ahb2",
+ 0x73c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(avs_clk, "avs", "osc24M", 0x740, BIT(31), 0);
+
+static SUNXI_CCU_GATE(bus_dbg_clk, "bus-dbg", "psi-ahb1-ahb2",
+ 0x78c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_psi_clk, "bus-psi", "psi-ahb1-ahb2",
+ 0x79c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_pwm_clk, "bus-pwm", "apb1", 0x7ac, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_iommu_clk, "bus-iommu", "apb1", 0x7bc, BIT(0), 0);
+
+static const char * const dram_parents[] = { "pll-ddr0", "pll-ddr1" };
+static struct ccu_div dram_clk = {
+ .div = _SUNXI_CCU_DIV(0, 2),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0x800,
+ .hw.init = CLK_HW_INIT_PARENTS("dram",
+ dram_parents,
+ &ccu_div_ops,
+ CLK_IS_CRITICAL),
+ },
+};
+
+static SUNXI_CCU_GATE(mbus_dma_clk, "mbus-dma", "mbus",
+ 0x804, BIT(0), 0);
+static SUNXI_CCU_GATE(mbus_ve_clk, "mbus-ve", "mbus",
+ 0x804, BIT(1), 0);
+static SUNXI_CCU_GATE(mbus_ce_clk, "mbus-ce", "mbus",
+ 0x804, BIT(2), 0);
+static SUNXI_CCU_GATE(mbus_ts_clk, "mbus-ts", "mbus",
+ 0x804, BIT(3), 0);
+static SUNXI_CCU_GATE(mbus_nand_clk, "mbus-nand", "mbus",
+ 0x804, BIT(5), 0);
+static SUNXI_CCU_GATE(mbus_g2d_clk, "mbus-g2d", "mbus",
+ 0x804, BIT(10), 0);
+
+static SUNXI_CCU_GATE(bus_dram_clk, "bus-dram", "psi-ahb1-ahb2",
+ 0x80c, BIT(0), CLK_IS_CRITICAL);
+
+static const char * const nand_spi_parents[] = { "osc24M", "pll-periph0",
+ "pll-periph1", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand0_clk, "nand0", nand_spi_parents, 0x810,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(nand1_clk, "nand1", nand_spi_parents, 0x814,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_nand_clk, "bus-nand", "ahb3", 0x82c, BIT(0), 0);
+
+static const char * const mmc_parents[] = { "osc24M", "pll-periph0-2x",
+ "pll-periph1-2x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc0_clk, "mmc0", mmc_parents, 0x830,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc1_clk, "mmc1", mmc_parents, 0x834,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE_POSTDIV(mmc2_clk, "mmc2", mmc_parents, 0x838,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 2, /* post-div */
+ 0);
+
+static SUNXI_CCU_GATE(bus_mmc0_clk, "bus-mmc0", "ahb3", 0x84c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_mmc1_clk, "bus-mmc1", "ahb3", 0x84c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_mmc2_clk, "bus-mmc2", "ahb3", 0x84c, BIT(2), 0);
+
+static SUNXI_CCU_GATE(bus_uart0_clk, "bus-uart0", "apb2", 0x90c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_uart1_clk, "bus-uart1", "apb2", 0x90c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_uart2_clk, "bus-uart2", "apb2", 0x90c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_uart3_clk, "bus-uart3", "apb2", 0x90c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_uart4_clk, "bus-uart4", "apb2", 0x90c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_uart5_clk, "bus-uart5", "apb2", 0x90c, BIT(5), 0);
+
+static SUNXI_CCU_GATE(bus_i2c0_clk, "bus-i2c0", "apb2", 0x91c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_i2c1_clk, "bus-i2c1", "apb2", 0x91c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_i2c2_clk, "bus-i2c2", "apb2", 0x91c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_i2c3_clk, "bus-i2c3", "apb2", 0x91c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_i2c4_clk, "bus-i2c4", "apb2", 0x91c, BIT(4), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi0_clk, "spi0", nand_spi_parents, 0x940,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(spi1_clk, "spi1", nand_spi_parents, 0x944,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 3, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_spi0_clk, "bus-spi0", "ahb3", 0x96c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_spi1_clk, "bus-spi1", "ahb3", 0x96c, BIT(1), 0);
+
+static SUNXI_CCU_GATE(emac_25m_clk, "emac-25m", "ahb3", 0x970,
+ BIT(31) | BIT(30), 0);
+
+static SUNXI_CCU_GATE(bus_emac0_clk, "bus-emac0", "ahb3", 0x97c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_emac1_clk, "bus-emac1", "ahb3", 0x97c, BIT(1), 0);
+
+static const char * const ts_parents[] = { "osc24M", "pll-periph0" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(ts_clk, "ts", ts_parents, 0x9b0,
+ 0, 4, /* M */
+ 8, 2, /* N */
+ 24, 1, /* mux */
+ BIT(31),/* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_ts_clk, "bus-ts", "ahb3", 0x9bc, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_ths_clk, "bus-ths", "apb1", 0x9fc, BIT(0), 0);
+
+static const char * const audio_parents[] = { "pll-audio-1x", "pll-audio-2x",
+ "pll-audio-4x", "pll-audio-hs" };
+static struct ccu_div spdif_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa20,
+ .hw.init = CLK_HW_INIT_PARENTS("spdif",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_spdif_clk, "bus-spdif", "apb1", 0xa2c, BIT(0), 0);
+
+static struct ccu_div dmic_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa40,
+ .hw.init = CLK_HW_INIT_PARENTS("dmic",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_dmic_clk, "bus-dmic", "apb1", 0xa4c, BIT(0), 0);
+
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_1x_clk, "audio-codec-1x",
+ audio_parents, 0xa50,
+ 0, 4, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+static SUNXI_CCU_M_WITH_MUX_GATE(audio_codec_4x_clk, "audio-codec-4x",
+ audio_parents, 0xa54,
+ 0, 4, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_audio_codec_clk, "bus-audio-codec", "apb1", 0xa5c,
+ BIT(0), 0);
+
+static struct ccu_div audio_hub_clk = {
+ .enable = BIT(31),
+ .div = _SUNXI_CCU_DIV_FLAGS(8, 2, CLK_DIVIDER_POWER_OF_TWO),
+ .mux = _SUNXI_CCU_MUX(24, 2),
+ .common = {
+ .reg = 0xa60,
+ .hw.init = CLK_HW_INIT_PARENTS("audio-hub",
+ audio_parents,
+ &ccu_div_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_audio_hub_clk, "bus-audio-hub", "apb1", 0xa6c, BIT(0), 0);
+
+/*
+ * There are OHCI 12M clock source selection bits for the four USB 2.0 ports.
+ * We will force them to 0 (12M divided from 48M).
+ */
+#define SUN50I_H616_USB0_CLK_REG 0xa70
+#define SUN50I_H616_USB1_CLK_REG 0xa74
+#define SUN50I_H616_USB2_CLK_REG 0xa78
+#define SUN50I_H616_USB3_CLK_REG 0xa7c
+
+static SUNXI_CCU_GATE(usb_ohci0_clk, "usb-ohci0", "osc12M", 0xa70, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy0_clk, "usb-phy0", "osc24M", 0xa70, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci1_clk, "usb-ohci1", "osc12M", 0xa74, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy1_clk, "usb-phy1", "osc24M", 0xa74, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci2_clk, "usb-ohci2", "osc12M", 0xa78, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy2_clk, "usb-phy2", "osc24M", 0xa78, BIT(29), 0);
+
+static SUNXI_CCU_GATE(usb_ohci3_clk, "usb-ohci3", "osc12M", 0xa7c, BIT(31), 0);
+static SUNXI_CCU_GATE(usb_phy3_clk, "usb-phy3", "osc24M", 0xa7c, BIT(29), 0);
+
+static SUNXI_CCU_GATE(bus_ohci0_clk, "bus-ohci0", "ahb3", 0xa8c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_ohci1_clk, "bus-ohci1", "ahb3", 0xa8c, BIT(1), 0);
+static SUNXI_CCU_GATE(bus_ohci2_clk, "bus-ohci2", "ahb3", 0xa8c, BIT(2), 0);
+static SUNXI_CCU_GATE(bus_ohci3_clk, "bus-ohci3", "ahb3", 0xa8c, BIT(3), 0);
+static SUNXI_CCU_GATE(bus_ehci0_clk, "bus-ehci0", "ahb3", 0xa8c, BIT(4), 0);
+static SUNXI_CCU_GATE(bus_ehci1_clk, "bus-ehci1", "ahb3", 0xa8c, BIT(5), 0);
+static SUNXI_CCU_GATE(bus_ehci2_clk, "bus-ehci2", "ahb3", 0xa8c, BIT(6), 0);
+static SUNXI_CCU_GATE(bus_ehci3_clk, "bus-ehci3", "ahb3", 0xa8c, BIT(7), 0);
+static SUNXI_CCU_GATE(bus_otg_clk, "bus-otg", "ahb3", 0xa8c, BIT(8), 0);
+
+static SUNXI_CCU_GATE(bus_keyadc_clk, "bus-keyadc", "apb1", 0xa9c, BIT(0), 0);
+
+static const char * const hdmi_parents[] = { "pll-video0", "pll-video0-4x",
+ "pll-video2", "pll-video2-4x" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdmi_clk, "hdmi", hdmi_parents, 0xb00,
+ 0, 4, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(hdmi_slow_clk, "hdmi-slow", "osc24M", 0xb04, BIT(31), 0);
+
+static const char * const hdmi_cec_parents[] = { "osc32k", "pll-periph0-2x" };
+static const struct ccu_mux_fixed_prediv hdmi_cec_predivs[] = {
+ { .index = 1, .div = 36621 },
+};
+
+#define SUN50I_H616_HDMI_CEC_CLK_REG 0xb10
+static struct ccu_mux hdmi_cec_clk = {
+ .enable = BIT(31),
+
+ .mux = {
+ .shift = 24,
+ .width = 2,
+
+ .fixed_predivs = hdmi_cec_predivs,
+ .n_predivs = ARRAY_SIZE(hdmi_cec_predivs),
+ },
+
+ .common = {
+ .reg = 0xb10,
+ .features = CCU_FEATURE_VARIABLE_PREDIV,
+ .hw.init = CLK_HW_INIT_PARENTS("hdmi-cec",
+ hdmi_cec_parents,
+ &ccu_mux_ops,
+ 0),
+ },
+};
+
+static SUNXI_CCU_GATE(bus_hdmi_clk, "bus-hdmi", "ahb3", 0xb1c, BIT(0), 0);
+
+static SUNXI_CCU_GATE(bus_tcon_top_clk, "bus-tcon-top", "ahb3",
+ 0xb5c, BIT(0), 0);
+
+static const char * const tcon_tv_parents[] = { "pll-video0",
+ "pll-video0-4x",
+ "pll-video1",
+ "pll-video1-4x" };
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv0_clk, "tcon-tv0",
+ tcon_tv_parents, 0xb80,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+static SUNXI_CCU_MP_WITH_MUX_GATE(tcon_tv1_clk, "tcon-tv1",
+ tcon_tv_parents, 0xb84,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_tcon_tv0_clk, "bus-tcon-tv0", "ahb3",
+ 0xb9c, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tcon_tv1_clk, "bus-tcon-tv1", "ahb3",
+ 0xb9c, BIT(1), 0);
+
+static SUNXI_CCU_MP_WITH_MUX_GATE(tve0_clk, "tve0",
+ tcon_tv_parents, 0xbb0,
+ 0, 4, /* M */
+ 8, 2, /* P */
+ 24, 3, /* mux */
+ BIT(31), /* gate */
+ CLK_SET_RATE_PARENT);
+
+static SUNXI_CCU_GATE(bus_tve_top_clk, "bus-tve-top", "ahb3",
+ 0xbbc, BIT(0), 0);
+static SUNXI_CCU_GATE(bus_tve0_clk, "bus-tve0", "ahb3",
+ 0xbbc, BIT(1), 0);
+
+static const char * const hdcp_parents[] = { "pll-periph0", "pll-periph1" };
+static SUNXI_CCU_M_WITH_MUX_GATE(hdcp_clk, "hdcp", hdcp_parents, 0xc40,
+ 0, 4, /* M */
+ 24, 2, /* mux */
+ BIT(31), /* gate */
+ 0);
+
+static SUNXI_CCU_GATE(bus_hdcp_clk, "bus-hdcp", "ahb3", 0xc4c, BIT(0), 0);
+
+/* Fixed factor clocks */
+static CLK_FIXED_FACTOR_FW_NAME(osc12M_clk, "osc12M", "hosc", 2, 1, 0);
+
+static const struct clk_hw *clk_parent_pll_audio[] = {
+ &pll_audio_hs_clk.common.hw
+};
+
+/*
+ * The divider of pll-audio is fixed to 24 for now, so 24576000 and 22579200
+ * rates can be set exactly in conjunction with sigma-delta modulation.
+ */
+static CLK_FIXED_FACTOR_HWS(pll_audio_1x_clk, "pll-audio-1x",
+ clk_parent_pll_audio,
+ 96, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_audio_2x_clk, "pll-audio-2x",
+ clk_parent_pll_audio,
+ 48, 1, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HWS(pll_audio_4x_clk, "pll-audio-4x",
+ clk_parent_pll_audio,
+ 24, 1, CLK_SET_RATE_PARENT);
+
+static const struct clk_hw *pll_periph0_parents[] = {
+ &pll_periph0_clk.common.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph0_2x_clk, "pll-periph0-2x",
+ pll_periph0_parents,
+ 1, 2, 0);
+
+static const struct clk_hw *pll_periph1_parents[] = {
+ &pll_periph1_clk.common.hw
+};
+
+static CLK_FIXED_FACTOR_HWS(pll_periph1_2x_clk, "pll-periph1-2x",
+ pll_periph1_parents,
+ 1, 2, 0);
+
+static CLK_FIXED_FACTOR_HW(pll_video0_4x_clk, "pll-video0-4x",
+ &pll_video0_clk.common.hw,
+ 1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HW(pll_video1_4x_clk, "pll-video1-4x",
+ &pll_video1_clk.common.hw,
+ 1, 4, CLK_SET_RATE_PARENT);
+static CLK_FIXED_FACTOR_HW(pll_video2_4x_clk, "pll-video2-4x",
+ &pll_video2_clk.common.hw,
+ 1, 4, CLK_SET_RATE_PARENT);
+
+static struct ccu_common *sun50i_h616_ccu_clks[] = {
+ &pll_cpux_clk.common,
+ &pll_ddr0_clk.common,
+ &pll_ddr1_clk.common,
+ &pll_periph0_clk.common,
+ &pll_periph1_clk.common,
+ &pll_gpu_clk.common,
+ &pll_video0_clk.common,
+ &pll_video1_clk.common,
+ &pll_video2_clk.common,
+ &pll_ve_clk.common,
+ &pll_de_clk.common,
+ &pll_audio_hs_clk.common,
+ &cpux_clk.common,
+ &axi_clk.common,
+ &cpux_apb_clk.common,
+ &psi_ahb1_ahb2_clk.common,
+ &ahb3_clk.common,
+ &apb1_clk.common,
+ &apb2_clk.common,
+ &mbus_clk.common,
+ &de_clk.common,
+ &bus_de_clk.common,
+ &deinterlace_clk.common,
+ &bus_deinterlace_clk.common,
+ &g2d_clk.common,
+ &bus_g2d_clk.common,
+ &gpu0_clk.common,
+ &bus_gpu_clk.common,
+ &gpu1_clk.common,
+ &ce_clk.common,
+ &bus_ce_clk.common,
+ &ve_clk.common,
+ &bus_ve_clk.common,
+ &bus_dma_clk.common,
+ &bus_hstimer_clk.common,
+ &avs_clk.common,
+ &bus_dbg_clk.common,
+ &bus_psi_clk.common,
+ &bus_pwm_clk.common,
+ &bus_iommu_clk.common,
+ &dram_clk.common,
+ &mbus_dma_clk.common,
+ &mbus_ve_clk.common,
+ &mbus_ce_clk.common,
+ &mbus_ts_clk.common,
+ &mbus_nand_clk.common,
+ &mbus_g2d_clk.common,
+ &bus_dram_clk.common,
+ &nand0_clk.common,
+ &nand1_clk.common,
+ &bus_nand_clk.common,
+ &mmc0_clk.common,
+ &mmc1_clk.common,
+ &mmc2_clk.common,
+ &bus_mmc0_clk.common,
+ &bus_mmc1_clk.common,
+ &bus_mmc2_clk.common,
+ &bus_uart0_clk.common,
+ &bus_uart1_clk.common,
+ &bus_uart2_clk.common,
+ &bus_uart3_clk.common,
+ &bus_uart4_clk.common,
+ &bus_uart5_clk.common,
+ &bus_i2c0_clk.common,
+ &bus_i2c1_clk.common,
+ &bus_i2c2_clk.common,
+ &bus_i2c3_clk.common,
+ &bus_i2c4_clk.common,
+ &spi0_clk.common,
+ &spi1_clk.common,
+ &bus_spi0_clk.common,
+ &bus_spi1_clk.common,
+ &emac_25m_clk.common,
+ &bus_emac0_clk.common,
+ &bus_emac1_clk.common,
+ &ts_clk.common,
+ &bus_ts_clk.common,
+ &bus_ths_clk.common,
+ &spdif_clk.common,
+ &bus_spdif_clk.common,
+ &dmic_clk.common,
+ &bus_dmic_clk.common,
+ &audio_codec_1x_clk.common,
+ &audio_codec_4x_clk.common,
+ &bus_audio_codec_clk.common,
+ &audio_hub_clk.common,
+ &bus_audio_hub_clk.common,
+ &usb_ohci0_clk.common,
+ &usb_phy0_clk.common,
+ &usb_ohci1_clk.common,
+ &usb_phy1_clk.common,
+ &usb_ohci2_clk.common,
+ &usb_phy2_clk.common,
+ &usb_ohci3_clk.common,
+ &usb_phy3_clk.common,
+ &bus_ohci0_clk.common,
+ &bus_ohci1_clk.common,
+ &bus_ohci2_clk.common,
+ &bus_ohci3_clk.common,
+ &bus_ehci0_clk.common,
+ &bus_ehci1_clk.common,
+ &bus_ehci2_clk.common,
+ &bus_ehci3_clk.common,
+ &bus_otg_clk.common,
+ &bus_keyadc_clk.common,
+ &hdmi_clk.common,
+ &hdmi_slow_clk.common,
+ &hdmi_cec_clk.common,
+ &bus_hdmi_clk.common,
+ &bus_tcon_top_clk.common,
+ &tcon_tv0_clk.common,
+ &tcon_tv1_clk.common,
+ &bus_tcon_tv0_clk.common,
+ &bus_tcon_tv1_clk.common,
+ &tve0_clk.common,
+ &bus_tve_top_clk.common,
+ &bus_tve0_clk.common,
+ &hdcp_clk.common,
+ &bus_hdcp_clk.common,
+};
+
+static struct clk_hw_onecell_data sun50i_h616_hw_clks = {
+ .hws = {
+ [CLK_OSC12M] = &osc12M_clk.hw,
+ [CLK_PLL_CPUX] = &pll_cpux_clk.common.hw,
+ [CLK_PLL_DDR0] = &pll_ddr0_clk.common.hw,
+ [CLK_PLL_DDR1] = &pll_ddr1_clk.common.hw,
+ [CLK_PLL_PERIPH0] = &pll_periph0_clk.common.hw,
+ [CLK_PLL_PERIPH0_2X] = &pll_periph0_2x_clk.hw,
+ [CLK_PLL_PERIPH1] = &pll_periph1_clk.common.hw,
+ [CLK_PLL_PERIPH1_2X] = &pll_periph1_2x_clk.hw,
+ [CLK_PLL_GPU] = &pll_gpu_clk.common.hw,
+ [CLK_PLL_VIDEO0] = &pll_video0_clk.common.hw,
+ [CLK_PLL_VIDEO0_4X] = &pll_video0_4x_clk.hw,
+ [CLK_PLL_VIDEO1] = &pll_video1_clk.common.hw,
+ [CLK_PLL_VIDEO1_4X] = &pll_video1_4x_clk.hw,
+ [CLK_PLL_VIDEO2] = &pll_video2_clk.common.hw,
+ [CLK_PLL_VIDEO2_4X] = &pll_video2_4x_clk.hw,
+ [CLK_PLL_VE] = &pll_ve_clk.common.hw,
+ [CLK_PLL_DE] = &pll_de_clk.common.hw,
+ [CLK_PLL_AUDIO_HS] = &pll_audio_hs_clk.common.hw,
+ [CLK_PLL_AUDIO_1X] = &pll_audio_1x_clk.hw,
+ [CLK_PLL_AUDIO_2X] = &pll_audio_2x_clk.hw,
+ [CLK_PLL_AUDIO_4X] = &pll_audio_4x_clk.hw,
+ [CLK_CPUX] = &cpux_clk.common.hw,
+ [CLK_AXI] = &axi_clk.common.hw,
+ [CLK_CPUX_APB] = &cpux_apb_clk.common.hw,
+ [CLK_PSI_AHB1_AHB2] = &psi_ahb1_ahb2_clk.common.hw,
+ [CLK_AHB3] = &ahb3_clk.common.hw,
+ [CLK_APB1] = &apb1_clk.common.hw,
+ [CLK_APB2] = &apb2_clk.common.hw,
+ [CLK_MBUS] = &mbus_clk.common.hw,
+ [CLK_DE] = &de_clk.common.hw,
+ [CLK_BUS_DE] = &bus_de_clk.common.hw,
+ [CLK_DEINTERLACE] = &deinterlace_clk.common.hw,
+ [CLK_BUS_DEINTERLACE] = &bus_deinterlace_clk.common.hw,
+ [CLK_G2D] = &g2d_clk.common.hw,
+ [CLK_BUS_G2D] = &bus_g2d_clk.common.hw,
+ [CLK_GPU0] = &gpu0_clk.common.hw,
+ [CLK_BUS_GPU] = &bus_gpu_clk.common.hw,
+ [CLK_GPU1] = &gpu1_clk.common.hw,
+ [CLK_CE] = &ce_clk.common.hw,
+ [CLK_BUS_CE] = &bus_ce_clk.common.hw,
+ [CLK_VE] = &ve_clk.common.hw,
+ [CLK_BUS_VE] = &bus_ve_clk.common.hw,
+ [CLK_BUS_DMA] = &bus_dma_clk.common.hw,
+ [CLK_BUS_HSTIMER] = &bus_hstimer_clk.common.hw,
+ [CLK_AVS] = &avs_clk.common.hw,
+ [CLK_BUS_DBG] = &bus_dbg_clk.common.hw,
+ [CLK_BUS_PSI] = &bus_psi_clk.common.hw,
+ [CLK_BUS_PWM] = &bus_pwm_clk.common.hw,
+ [CLK_BUS_IOMMU] = &bus_iommu_clk.common.hw,
+ [CLK_DRAM] = &dram_clk.common.hw,
+ [CLK_MBUS_DMA] = &mbus_dma_clk.common.hw,
+ [CLK_MBUS_VE] = &mbus_ve_clk.common.hw,
+ [CLK_MBUS_CE] = &mbus_ce_clk.common.hw,
+ [CLK_MBUS_TS] = &mbus_ts_clk.common.hw,
+ [CLK_MBUS_NAND] = &mbus_nand_clk.common.hw,
+ [CLK_MBUS_G2D] = &mbus_g2d_clk.common.hw,
+ [CLK_BUS_DRAM] = &bus_dram_clk.common.hw,
+ [CLK_NAND0] = &nand0_clk.common.hw,
+ [CLK_NAND1] = &nand1_clk.common.hw,
+ [CLK_BUS_NAND] = &bus_nand_clk.common.hw,
+ [CLK_MMC0] = &mmc0_clk.common.hw,
+ [CLK_MMC1] = &mmc1_clk.common.hw,
+ [CLK_MMC2] = &mmc2_clk.common.hw,
+ [CLK_BUS_MMC0] = &bus_mmc0_clk.common.hw,
+ [CLK_BUS_MMC1] = &bus_mmc1_clk.common.hw,
+ [CLK_BUS_MMC2] = &bus_mmc2_clk.common.hw,
+ [CLK_BUS_UART0] = &bus_uart0_clk.common.hw,
+ [CLK_BUS_UART1] = &bus_uart1_clk.common.hw,
+ [CLK_BUS_UART2] = &bus_uart2_clk.common.hw,
+ [CLK_BUS_UART3] = &bus_uart3_clk.common.hw,
+ [CLK_BUS_UART4] = &bus_uart4_clk.common.hw,
+ [CLK_BUS_UART5] = &bus_uart5_clk.common.hw,
+ [CLK_BUS_I2C0] = &bus_i2c0_clk.common.hw,
+ [CLK_BUS_I2C1] = &bus_i2c1_clk.common.hw,
+ [CLK_BUS_I2C2] = &bus_i2c2_clk.common.hw,
+ [CLK_BUS_I2C3] = &bus_i2c3_clk.common.hw,
+ [CLK_BUS_I2C4] = &bus_i2c4_clk.common.hw,
+ [CLK_SPI0] = &spi0_clk.common.hw,
+ [CLK_SPI1] = &spi1_clk.common.hw,
+ [CLK_BUS_SPI0] = &bus_spi0_clk.common.hw,
+ [CLK_BUS_SPI1] = &bus_spi1_clk.common.hw,
+ [CLK_EMAC_25M] = &emac_25m_clk.common.hw,
+ [CLK_BUS_EMAC0] = &bus_emac0_clk.common.hw,
+ [CLK_BUS_EMAC1] = &bus_emac1_clk.common.hw,
+ [CLK_TS] = &ts_clk.common.hw,
+ [CLK_BUS_TS] = &bus_ts_clk.common.hw,
+ [CLK_BUS_THS] = &bus_ths_clk.common.hw,
+ [CLK_SPDIF] = &spdif_clk.common.hw,
+ [CLK_BUS_SPDIF] = &bus_spdif_clk.common.hw,
+ [CLK_DMIC] = &dmic_clk.common.hw,
+ [CLK_BUS_DMIC] = &bus_dmic_clk.common.hw,
+ [CLK_AUDIO_CODEC_1X] = &audio_codec_1x_clk.common.hw,
+ [CLK_AUDIO_CODEC_4X] = &audio_codec_4x_clk.common.hw,
+ [CLK_BUS_AUDIO_CODEC] = &bus_audio_codec_clk.common.hw,
+ [CLK_AUDIO_HUB] = &audio_hub_clk.common.hw,
+ [CLK_BUS_AUDIO_HUB] = &bus_audio_hub_clk.common.hw,
+ [CLK_USB_OHCI0] = &usb_ohci0_clk.common.hw,
+ [CLK_USB_PHY0] = &usb_phy0_clk.common.hw,
+ [CLK_USB_OHCI1] = &usb_ohci1_clk.common.hw,
+ [CLK_USB_PHY1] = &usb_phy1_clk.common.hw,
+ [CLK_USB_OHCI2] = &usb_ohci2_clk.common.hw,
+ [CLK_USB_PHY2] = &usb_phy2_clk.common.hw,
+ [CLK_USB_OHCI3] = &usb_ohci3_clk.common.hw,
+ [CLK_USB_PHY3] = &usb_phy3_clk.common.hw,
+ [CLK_BUS_OHCI0] = &bus_ohci0_clk.common.hw,
+ [CLK_BUS_OHCI1] = &bus_ohci1_clk.common.hw,
+ [CLK_BUS_OHCI2] = &bus_ohci2_clk.common.hw,
+ [CLK_BUS_OHCI3] = &bus_ohci3_clk.common.hw,
+ [CLK_BUS_EHCI0] = &bus_ehci0_clk.common.hw,
+ [CLK_BUS_EHCI1] = &bus_ehci1_clk.common.hw,
+ [CLK_BUS_EHCI2] = &bus_ehci2_clk.common.hw,
+ [CLK_BUS_EHCI3] = &bus_ehci3_clk.common.hw,
+ [CLK_BUS_OTG] = &bus_otg_clk.common.hw,
+ [CLK_BUS_KEYADC] = &bus_keyadc_clk.common.hw,
+ [CLK_HDMI] = &hdmi_clk.common.hw,
+ [CLK_HDMI_SLOW] = &hdmi_slow_clk.common.hw,
+ [CLK_HDMI_CEC] = &hdmi_cec_clk.common.hw,
+ [CLK_BUS_HDMI] = &bus_hdmi_clk.common.hw,
+ [CLK_BUS_TCON_TOP] = &bus_tcon_top_clk.common.hw,
+ [CLK_TCON_TV0] = &tcon_tv0_clk.common.hw,
+ [CLK_TCON_TV1] = &tcon_tv1_clk.common.hw,
+ [CLK_BUS_TCON_TV0] = &bus_tcon_tv0_clk.common.hw,
+ [CLK_BUS_TCON_TV1] = &bus_tcon_tv1_clk.common.hw,
+ [CLK_TVE0] = &tve0_clk.common.hw,
+ [CLK_BUS_TVE_TOP] = &bus_tve_top_clk.common.hw,
+ [CLK_BUS_TVE0] = &bus_tve0_clk.common.hw,
+ [CLK_HDCP] = &hdcp_clk.common.hw,
+ [CLK_BUS_HDCP] = &bus_hdcp_clk.common.hw,
+ },
+ .num = CLK_NUMBER,
+};
+
+static struct ccu_reset_map sun50i_h616_ccu_resets[] = {
+ [RST_MBUS] = { 0x540, BIT(30) },
+
+ [RST_BUS_DE] = { 0x60c, BIT(16) },
+ [RST_BUS_DEINTERLACE] = { 0x62c, BIT(16) },
+ [RST_BUS_GPU] = { 0x67c, BIT(16) },
+ [RST_BUS_CE] = { 0x68c, BIT(16) },
+ [RST_BUS_VE] = { 0x69c, BIT(16) },
+ [RST_BUS_DMA] = { 0x70c, BIT(16) },
+ [RST_BUS_HSTIMER] = { 0x73c, BIT(16) },
+ [RST_BUS_DBG] = { 0x78c, BIT(16) },
+ [RST_BUS_PSI] = { 0x79c, BIT(16) },
+ [RST_BUS_PWM] = { 0x7ac, BIT(16) },
+ [RST_BUS_IOMMU] = { 0x7bc, BIT(16) },
+ [RST_BUS_DRAM] = { 0x80c, BIT(16) },
+ [RST_BUS_NAND] = { 0x82c, BIT(16) },
+ [RST_BUS_MMC0] = { 0x84c, BIT(16) },
+ [RST_BUS_MMC1] = { 0x84c, BIT(17) },
+ [RST_BUS_MMC2] = { 0x84c, BIT(18) },
+ [RST_BUS_UART0] = { 0x90c, BIT(16) },
+ [RST_BUS_UART1] = { 0x90c, BIT(17) },
+ [RST_BUS_UART2] = { 0x90c, BIT(18) },
+ [RST_BUS_UART3] = { 0x90c, BIT(19) },
+ [RST_BUS_UART4] = { 0x90c, BIT(20) },
+ [RST_BUS_UART5] = { 0x90c, BIT(21) },
+ [RST_BUS_I2C0] = { 0x91c, BIT(16) },
+ [RST_BUS_I2C1] = { 0x91c, BIT(17) },
+ [RST_BUS_I2C2] = { 0x91c, BIT(18) },
+ [RST_BUS_I2C3] = { 0x91c, BIT(19) },
+ [RST_BUS_I2C4] = { 0x91c, BIT(20) },
+ [RST_BUS_SPI0] = { 0x96c, BIT(16) },
+ [RST_BUS_SPI1] = { 0x96c, BIT(17) },
+ [RST_BUS_EMAC0] = { 0x97c, BIT(16) },
+ [RST_BUS_EMAC1] = { 0x97c, BIT(17) },
+ [RST_BUS_TS] = { 0x9bc, BIT(16) },
+ [RST_BUS_THS] = { 0x9fc, BIT(16) },
+ [RST_BUS_SPDIF] = { 0xa2c, BIT(16) },
+ [RST_BUS_DMIC] = { 0xa4c, BIT(16) },
+ [RST_BUS_AUDIO_CODEC] = { 0xa5c, BIT(16) },
+ [RST_BUS_AUDIO_HUB] = { 0xa6c, BIT(16) },
+
+ [RST_USB_PHY0] = { 0xa70, BIT(30) },
+ [RST_USB_PHY1] = { 0xa74, BIT(30) },
+ [RST_USB_PHY2] = { 0xa78, BIT(30) },
+ [RST_USB_PHY3] = { 0xa7c, BIT(30) },
+ [RST_BUS_OHCI0] = { 0xa8c, BIT(16) },
+ [RST_BUS_OHCI1] = { 0xa8c, BIT(17) },
+ [RST_BUS_OHCI2] = { 0xa8c, BIT(18) },
+ [RST_BUS_OHCI3] = { 0xa8c, BIT(19) },
+ [RST_BUS_EHCI0] = { 0xa8c, BIT(20) },
+ [RST_BUS_EHCI1] = { 0xa8c, BIT(21) },
+ [RST_BUS_EHCI2] = { 0xa8c, BIT(22) },
+ [RST_BUS_EHCI3] = { 0xa8c, BIT(23) },
+ [RST_BUS_OTG] = { 0xa8c, BIT(24) },
+ [RST_BUS_KEYADC] = { 0xa9c, BIT(16) },
+
+ [RST_BUS_HDMI] = { 0xb1c, BIT(16) },
+ [RST_BUS_HDMI_SUB] = { 0xb1c, BIT(17) },
+ [RST_BUS_TCON_TOP] = { 0xb5c, BIT(16) },
+ [RST_BUS_TCON_TV0] = { 0xb9c, BIT(16) },
+ [RST_BUS_TCON_TV1] = { 0xb9c, BIT(17) },
+ [RST_BUS_TVE_TOP] = { 0xbbc, BIT(16) },
+ [RST_BUS_TVE0] = { 0xbbc, BIT(17) },
+ [RST_BUS_HDCP] = { 0xc4c, BIT(16) },
+};
+
+static const struct sunxi_ccu_desc sun50i_h616_ccu_desc = {
+ .ccu_clks = sun50i_h616_ccu_clks,
+ .num_ccu_clks = ARRAY_SIZE(sun50i_h616_ccu_clks),
+
+ .hw_clks = &sun50i_h616_hw_clks,
+
+ .resets = sun50i_h616_ccu_resets,
+ .num_resets = ARRAY_SIZE(sun50i_h616_ccu_resets),
+};
+
+static const u32 pll_regs[] = {
+ SUN50I_H616_PLL_CPUX_REG,
+ SUN50I_H616_PLL_DDR0_REG,
+ SUN50I_H616_PLL_DDR1_REG,
+ SUN50I_H616_PLL_PERIPH0_REG,
+ SUN50I_H616_PLL_PERIPH1_REG,
+ SUN50I_H616_PLL_GPU_REG,
+ SUN50I_H616_PLL_VIDEO0_REG,
+ SUN50I_H616_PLL_VIDEO1_REG,
+ SUN50I_H616_PLL_VIDEO2_REG,
+ SUN50I_H616_PLL_VE_REG,
+ SUN50I_H616_PLL_DE_REG,
+ SUN50I_H616_PLL_AUDIO_REG,
+};
+
+static const u32 pll_video_regs[] = {
+ SUN50I_H616_PLL_VIDEO0_REG,
+ SUN50I_H616_PLL_VIDEO1_REG,
+ SUN50I_H616_PLL_VIDEO2_REG,
+};
+
+static const u32 usb2_clk_regs[] = {
+ SUN50I_H616_USB0_CLK_REG,
+ SUN50I_H616_USB1_CLK_REG,
+ SUN50I_H616_USB2_CLK_REG,
+ SUN50I_H616_USB3_CLK_REG,
+};
+
+static void __init sun50i_h616_ccu_setup(struct device_node *node)
+{
+ void __iomem *reg;
+ u32 val;
+ int i;
+
+ reg = of_io_request_and_map(node, 0, of_node_full_name(node));
+ if (IS_ERR(reg)) {
+ pr_err("%pOF: Could not map clock registers\n", node);
+ return;
+ }
+
+ /* Enable the lock bits and the output enable bits on all PLLs */
+ for (i = 0; i < ARRAY_SIZE(pll_regs); i++) {
+ val = readl(reg + pll_regs[i]);
+ val |= BIT(29) | BIT(27);
+ writel(val, reg + pll_regs[i]);
+ }
+
+ /*
+ * Force the output divider of video PLLs to 0.
+ *
+ * See the comment before pll-video0 definition for the reason.
+ */
+ for (i = 0; i < ARRAY_SIZE(pll_video_regs); i++) {
+ val = readl(reg + pll_video_regs[i]);
+ val &= ~BIT(0);
+ writel(val, reg + pll_video_regs[i]);
+ }
+
+ /*
+ * Force OHCI 12M clock sources to 00 (12MHz divided from 48MHz)
+ *
+ * This clock mux is still mysterious, and the code just enforces
+ * it to have a valid clock parent.
+ */
+ for (i = 0; i < ARRAY_SIZE(usb2_clk_regs); i++) {
+ val = readl(reg + usb2_clk_regs[i]);
+ val &= ~GENMASK(25, 24);
+ writel(val, reg + usb2_clk_regs[i]);
+ }
+
+ /*
+ * Force the post-divider of pll-audio to 12 and the output divider
+ * of it to 2, so 24576000 and 22579200 rates can be set exactly.
+ */
+ val = readl(reg + SUN50I_H616_PLL_AUDIO_REG);
+ val &= ~(GENMASK(21, 16) | BIT(0));
+ writel(val | (11 << 16) | BIT(0), reg + SUN50I_H616_PLL_AUDIO_REG);
+
+ /*
+ * First clock parent (osc32K) is unusable for CEC. But since there
+ * is no good way to force parent switch (both run with same frequency),
+ * just set second clock parent here.
+ */
+ val = readl(reg + SUN50I_H616_HDMI_CEC_CLK_REG);
+ val |= BIT(24);
+ writel(val, reg + SUN50I_H616_HDMI_CEC_CLK_REG);
+
+ i = sunxi_ccu_probe(node, reg, &sun50i_h616_ccu_desc);
+ if (i)
+ pr_err("%pOF: probing clocks fails: %d\n", node, i);
+}
+
+CLK_OF_DECLARE(sun50i_h616_ccu, "allwinner,sun50i-h616-ccu",
+ sun50i_h616_ccu_setup);
diff --git a/drivers/clk/sunxi-ng/ccu-sun50i-h616.h b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
new file mode 100644
index 000000000000..dd671b413f22
--- /dev/null
+++ b/drivers/clk/sunxi-ng/ccu-sun50i-h616.h
@@ -0,0 +1,56 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright 2020 Arm Ltd.
+ */
+
+#ifndef _CCU_SUN50I_H616_H_
+#define _CCU_SUN50I_H616_H_
+
+#include <dt-bindings/clock/sun50i-h616-ccu.h>
+#include <dt-bindings/reset/sun50i-h616-ccu.h>
+
+#define CLK_OSC12M 0
+#define CLK_PLL_CPUX 1
+#define CLK_PLL_DDR0 2
+#define CLK_PLL_DDR1 3
+
+/* PLL_PERIPH0 exported for PRCM */
+
+#define CLK_PLL_PERIPH0_2X 5
+#define CLK_PLL_PERIPH1 6
+#define CLK_PLL_PERIPH1_2X 7
+#define CLK_PLL_GPU 8
+#define CLK_PLL_VIDEO0 9
+#define CLK_PLL_VIDEO0_4X 10
+#define CLK_PLL_VIDEO1 11
+#define CLK_PLL_VIDEO1_4X 12
+#define CLK_PLL_VIDEO2 13
+#define CLK_PLL_VIDEO2_4X 14
+#define CLK_PLL_VE 15
+#define CLK_PLL_DE 16
+#define CLK_PLL_AUDIO_HS 17
+#define CLK_PLL_AUDIO_1X 18
+#define CLK_PLL_AUDIO_2X 19
+#define CLK_PLL_AUDIO_4X 20
+
+/* CPUX clock exported for DVFS */
+
+#define CLK_AXI 22
+#define CLK_CPUX_APB 23
+#define CLK_PSI_AHB1_AHB2 24
+#define CLK_AHB3 25
+
+/* APB1 clock exported for PIO */
+
+#define CLK_APB2 27
+#define CLK_MBUS 28
+
+/* All module clocks and bus gates are exported except DRAM */
+
+#define CLK_DRAM 49
+
+#define CLK_BUS_DRAM 56
+
+#define CLK_NUMBER (CLK_BUS_HDCP + 1)
+
+#endif /* _CCU_SUN50I_H616_H_ */
diff --git a/include/dt-bindings/clock/sun50i-h616-ccu.h b/include/dt-bindings/clock/sun50i-h616-ccu.h
new file mode 100644
index 000000000000..4fc08b0df2f3
--- /dev/null
+++ b/include/dt-bindings/clock/sun50i-h616-ccu.h
@@ -0,0 +1,115 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+#ifndef _DT_BINDINGS_CLK_SUN50I_H616_H_
+#define _DT_BINDINGS_CLK_SUN50I_H616_H_
+
+#define CLK_PLL_PERIPH0 4
+
+#define CLK_CPUX 21
+
+#define CLK_APB1 26
+
+#define CLK_DE 29
+#define CLK_BUS_DE 30
+#define CLK_DEINTERLACE 31
+#define CLK_BUS_DEINTERLACE 32
+#define CLK_G2D 33
+#define CLK_BUS_G2D 34
+#define CLK_GPU0 35
+#define CLK_BUS_GPU 36
+#define CLK_GPU1 37
+#define CLK_CE 38
+#define CLK_BUS_CE 39
+#define CLK_VE 40
+#define CLK_BUS_VE 41
+#define CLK_BUS_DMA 42
+#define CLK_BUS_HSTIMER 43
+#define CLK_AVS 44
+#define CLK_BUS_DBG 45
+#define CLK_BUS_PSI 46
+#define CLK_BUS_PWM 47
+#define CLK_BUS_IOMMU 48
+
+#define CLK_MBUS_DMA 50
+#define CLK_MBUS_VE 51
+#define CLK_MBUS_CE 52
+#define CLK_MBUS_TS 53
+#define CLK_MBUS_NAND 54
+#define CLK_MBUS_G2D 55
+
+#define CLK_NAND0 57
+#define CLK_NAND1 58
+#define CLK_BUS_NAND 59
+#define CLK_MMC0 60
+#define CLK_MMC1 61
+#define CLK_MMC2 62
+#define CLK_BUS_MMC0 63
+#define CLK_BUS_MMC1 64
+#define CLK_BUS_MMC2 65
+#define CLK_BUS_UART0 66
+#define CLK_BUS_UART1 67
+#define CLK_BUS_UART2 68
+#define CLK_BUS_UART3 69
+#define CLK_BUS_UART4 70
+#define CLK_BUS_UART5 71
+#define CLK_BUS_I2C0 72
+#define CLK_BUS_I2C1 73
+#define CLK_BUS_I2C2 74
+#define CLK_BUS_I2C3 75
+#define CLK_BUS_I2C4 76
+#define CLK_SPI0 77
+#define CLK_SPI1 78
+#define CLK_BUS_SPI0 79
+#define CLK_BUS_SPI1 80
+#define CLK_EMAC_25M 81
+#define CLK_BUS_EMAC0 82
+#define CLK_BUS_EMAC1 83
+#define CLK_TS 84
+#define CLK_BUS_TS 85
+#define CLK_BUS_THS 86
+#define CLK_SPDIF 87
+#define CLK_BUS_SPDIF 88
+#define CLK_DMIC 89
+#define CLK_BUS_DMIC 90
+#define CLK_AUDIO_CODEC_1X 91
+#define CLK_AUDIO_CODEC_4X 92
+#define CLK_BUS_AUDIO_CODEC 93
+#define CLK_AUDIO_HUB 94
+#define CLK_BUS_AUDIO_HUB 95
+#define CLK_USB_OHCI0 96
+#define CLK_USB_PHY0 97
+#define CLK_USB_OHCI1 98
+#define CLK_USB_PHY1 99
+#define CLK_USB_OHCI2 100
+#define CLK_USB_PHY2 101
+#define CLK_USB_OHCI3 102
+#define CLK_USB_PHY3 103
+#define CLK_BUS_OHCI0 104
+#define CLK_BUS_OHCI1 105
+#define CLK_BUS_OHCI2 106
+#define CLK_BUS_OHCI3 107
+#define CLK_BUS_EHCI0 108
+#define CLK_BUS_EHCI1 109
+#define CLK_BUS_EHCI2 110
+#define CLK_BUS_EHCI3 111
+#define CLK_BUS_OTG 112
+#define CLK_BUS_KEYADC 113
+#define CLK_HDMI 114
+#define CLK_HDMI_SLOW 115
+#define CLK_HDMI_CEC 116
+#define CLK_BUS_HDMI 117
+#define CLK_BUS_TCON_TOP 118
+#define CLK_TCON_TV0 119
+#define CLK_TCON_TV1 120
+#define CLK_BUS_TCON_TV0 121
+#define CLK_BUS_TCON_TV1 122
+#define CLK_TVE0 123
+#define CLK_BUS_TVE_TOP 124
+#define CLK_BUS_TVE0 125
+#define CLK_HDCP 126
+#define CLK_BUS_HDCP 127
+
+#endif /* _DT_BINDINGS_CLK_SUN50I_H616_H_ */
diff --git a/include/dt-bindings/reset/sun50i-h616-ccu.h b/include/dt-bindings/reset/sun50i-h616-ccu.h
new file mode 100644
index 000000000000..cb6285a8d128
--- /dev/null
+++ b/include/dt-bindings/reset/sun50i-h616-ccu.h
@@ -0,0 +1,70 @@
+/* SPDX-License-Identifier: (GPL-2.0+ or MIT) */
+/*
+ * Copyright (C) 2020 Arm Ltd.
+ */
+
+#ifndef _DT_BINDINGS_RESET_SUN50I_H616_H_
+#define _DT_BINDINGS_RESET_SUN50I_H616_H_
+
+#define RST_MBUS 0
+#define RST_BUS_DE 1
+#define RST_BUS_DEINTERLACE 2
+#define RST_BUS_GPU 3
+#define RST_BUS_CE 4
+#define RST_BUS_VE 5
+#define RST_BUS_DMA 6
+#define RST_BUS_HSTIMER 7
+#define RST_BUS_DBG 8
+#define RST_BUS_PSI 9
+#define RST_BUS_PWM 10
+#define RST_BUS_IOMMU 11
+#define RST_BUS_DRAM 12
+#define RST_BUS_NAND 13
+#define RST_BUS_MMC0 14
+#define RST_BUS_MMC1 15
+#define RST_BUS_MMC2 16
+#define RST_BUS_UART0 17
+#define RST_BUS_UART1 18
+#define RST_BUS_UART2 19
+#define RST_BUS_UART3 20
+#define RST_BUS_UART4 21
+#define RST_BUS_UART5 22
+#define RST_BUS_I2C0 23
+#define RST_BUS_I2C1 24
+#define RST_BUS_I2C2 25
+#define RST_BUS_I2C3 26
+#define RST_BUS_I2C4 27
+#define RST_BUS_SPI0 28
+#define RST_BUS_SPI1 29
+#define RST_BUS_EMAC0 30
+#define RST_BUS_EMAC1 31
+#define RST_BUS_TS 32
+#define RST_BUS_THS 33
+#define RST_BUS_SPDIF 34
+#define RST_BUS_DMIC 35
+#define RST_BUS_AUDIO_CODEC 36
+#define RST_BUS_AUDIO_HUB 37
+#define RST_USB_PHY0 38
+#define RST_USB_PHY1 39
+#define RST_USB_PHY2 40
+#define RST_USB_PHY3 41
+#define RST_BUS_OHCI0 42
+#define RST_BUS_OHCI1 43
+#define RST_BUS_OHCI2 44
+#define RST_BUS_OHCI3 45
+#define RST_BUS_EHCI0 46
+#define RST_BUS_EHCI1 47
+#define RST_BUS_EHCI2 48
+#define RST_BUS_EHCI3 49
+#define RST_BUS_OTG 50
+#define RST_BUS_HDMI 51
+#define RST_BUS_HDMI_SUB 52
+#define RST_BUS_TCON_TOP 53
+#define RST_BUS_TCON_TV0 54
+#define RST_BUS_TCON_TV1 55
+#define RST_BUS_TVE_TOP 56
+#define RST_BUS_TVE0 57
+#define RST_BUS_HDCP 58
+#define RST_BUS_KEYADC 59
+
+#endif /* _DT_BINDINGS_RESET_SUN50I_H616_H_ */
--
2.17.5
Powered by blists - more mailing lists