linux-kernel - [PATCH v6 10/11] DO NOT MERGE: ARM: dts: Add RPi's official PoE hat support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201211164801.7838-11-nsaenzjulienne@suse.de>
Date:   Fri, 11 Dec 2020 17:47:59 +0100
From:   Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
To:     u.kleine-koenig@...gutronix.de, linux-kernel@...r.kernel.org,
        Rob Herring <robh+dt@...nel.org>,
        Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
Cc:     f.fainelli@...il.com, linux-pwm@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        wahrenst@....net, linux-input@...r.kernel.org,
        dmitry.torokhov@...il.com, gregkh@...uxfoundation.org,
        devel@...verdev.osuosl.org, p.zabel@...gutronix.de,
        linux-gpio@...r.kernel.org, linus.walleij@...aro.org,
        linux-clk@...r.kernel.org, sboyd@...nel.org,
        linux-rpi-kernel@...ts.infradead.org, bgolaszewski@...libre.com,
        andy.shevchenko@...il.com
Subject: [PATCH v6 10/11] DO NOT MERGE: ARM: dts: Add RPi's official PoE hat support

This is an example on how to enable the fan on top of RPi's official PoE
hat.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@...e.de>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 54 +++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 403bacf986eb..9ae44620c5b8 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -5,6 +5,7 @@
 #include "bcm283x-rpi-usb-peripheral.dtsi"
 
 #include <dt-bindings/reset/raspberrypi,firmware-reset.h>
+#include <dt-bindings/pwm/raspberrypi,firmware-poe-pwm.h>
 
 / {
 	compatible = "raspberrypi,4-model-b", "brcm,bcm2711";
@@ -68,6 +69,54 @@ sd_vcc_reg: sd_vcc_reg {
 		enable-active-high;
 		gpio = <&expgpio 6 GPIO_ACTIVE_HIGH>;
 	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 50 150 255>;
+		#cooling-cells = <2>;
+		pwms = <&fwpwm RASPBERRYPI_FIRMWARE_PWM_POE 80000>;
+	};
+
+	thermal-zones {
+		cpu_thermal: cpu-thermal {
+			trips {
+				threshold: trip-point@0 {
+					temperature = <45000>;
+					hysteresis = <5000>;
+					type = "active";
+				};
+
+				target: trip-point@1 {
+					temperature = <50000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+
+				cpu_hot: cpu_hot@0 {
+					temperature = <55000>;
+					hysteresis = <2000>;
+					type = "active";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&threshold>;
+					cooling-device = <&fan 0 1>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&fan 1 2>;
+				};
+
+				map2 {
+					trip = <&cpu_hot>;
+					cooling-device = <&fan 2 3>;
+				};
+			};
+		};
+	};
 };
 
 &ddc0 {
@@ -103,6 +152,11 @@ reset: reset {
 		compatible = "raspberrypi,firmware-reset";
 		#reset-cells = <1>;
 	};
+
+	fwpwm: pwm {
+		compatible = "raspberrypi,firmware-poe-pwm";
+		#pwm-cells = <2>;
+	};
 };
 
 &gpio {
-- 
2.29.2