linux-kernel - [PATCH v4 1/2] mmc: sdhci-msm: Warn about overclocking SD/MMC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201211091150.v4.1.Iec3430c7d3c2a29262695edef7b82a14aaa567e5@changeid>
Date:   Fri, 11 Dec 2020 09:12:32 -0800
From:   Douglas Anderson <dianders@...omium.org>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        Adrian Hunter <adrian.hunter@...el.com>
Cc:     Stephen Boyd <swboyd@...omium.org>,
        Taniya Das <tdas@...eaurora.org>, vbadigan@...eaurora.org,
        Douglas Anderson <dianders@...omium.org>,
        Bjorn Andersson <bjorn.andersson@...aro.org>,
        Andy Gross <agross@...nel.org>, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, linux-mmc@...r.kernel.org
Subject: [PATCH v4 1/2] mmc: sdhci-msm: Warn about overclocking SD/MMC

As talked about in commit 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use
floor ops for sdcc clks"), most clocks handled by the Qualcomm clock
drivers are rounded _up_ by default instead of down.  We should make
sure SD/MMC clocks are always rounded down in the clock drivers.
Let's add a warning in the Qualcomm SDHCI driver to help catch the
problem.

This would have saved a bunch of time [1].

NOTE: this doesn't actually fix any problems, it just makes it obvious
to devs that there is a problem and that should be an indication to
fix the clock driver.

[1] http://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid

Suggested-by: Stephen Boyd <swboyd@...omium.org>
Signed-off-by: Douglas Anderson <dianders@...omium.org>
Reviewed-by: Stephen Boyd <swboyd@...omium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@...aro.org>
---

Changes in v4:
- Emphasize in the commit message that this itself doesn't fix anything.

Changes in v3:
- Proper printf format code.

Changes in v2:
- Store rate in unsigned long, not unsigned int.
- Reuse the clk_get_rate() in the later print.

 drivers/mmc/host/sdhci-msm.c | 15 +++++++++++++--
 1 file changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 3451eb325513..50beb407dbe9 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -353,6 +353,7 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
 	struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
 	struct mmc_ios curr_ios = host->mmc->ios;
 	struct clk *core_clk = msm_host->bulk_clks[0].clk;
+	unsigned long achieved_rate;
 	int rc;
 
 	clock = msm_get_clock_rate_for_bus_mode(host, clock);
@@ -363,10 +364,20 @@ static void msm_set_clock_rate_for_bus_mode(struct sdhci_host *host,
 		       curr_ios.timing);
 		return;
 	}
+
+	/*
+	 * Qualcomm clock drivers by default round clock _up_ if they can't
+	 * make the requested rate.  This is not good for SD.  Yell if we
+	 * encounter it.
+	 */
+	achieved_rate = clk_get_rate(core_clk);
+	if (achieved_rate > clock)
+		pr_warn("%s: Card appears overclocked; req %u Hz, actual %lu Hz\n",
+			mmc_hostname(host->mmc), clock, achieved_rate);
+
 	msm_host->clk_rate = clock;
 	pr_debug("%s: Setting clock at rate %lu at timing %d\n",
-		 mmc_hostname(host->mmc), clk_get_rate(core_clk),
-		 curr_ios.timing);
+		 mmc_hostname(host->mmc), achieved_rate, curr_ios.timing);
 }
 
 /* Platform specific tuning */
-- 
2.29.2.576.ga3fc446d84-goog