| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20201214180743.14584-3-zajec5@gmail.com>
Date: Mon, 14 Dec 2020 19:07:43 +0100
From: Rafał Miłecki <zajec5@...il.com>
To: Florian Fainelli <f.fainelli@...il.com>,
Rob Herring <robh+dt@...nel.org>
Cc: Philipp Zabel <p.zabel@...gutronix.de>,
"Rafael J . Wysocki" <rjw@...ysocki.net>,
Kevin Hilman <khilman@...nel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
devicetree@...r.kernel.org, bcm-kernel-feedback-list@...adcom.com,
linux-kernel@...r.kernel.org,
Rafał Miłecki <rafal@...ecki.pl>
Subject: [PATCH V2 2/2] soc: bcm: add PM driver for Broadcom's PMB
From: Rafał Miłecki <rafal@...ecki.pl>
PMB originally comes from BCM63138 but can be also found on many other
chipsets (e.g. BCM4908). It's needed to power on and off SoC blocks like
PCIe, SATA, USB.
Signed-off-by: Rafał Miłecki <rafal@...ecki.pl>
---
V2: Use drivers/soc/bcm/bcm63xx/
Add help to the config BCM_PMB
Drop debugging print
---
MAINTAINERS | 10 +
drivers/soc/bcm/Makefile | 2 +-
drivers/soc/bcm/bcm63xx/Kconfig | 9 +
drivers/soc/bcm/bcm63xx/Makefile | 1 +
drivers/soc/bcm/bcm63xx/bcm-pmb.c | 333 ++++++++++++++++++++++++++++++
5 files changed, 354 insertions(+), 1 deletion(-)
create mode 100644 drivers/soc/bcm/bcm63xx/bcm-pmb.c
diff --git a/MAINTAINERS b/MAINTAINERS
index e73636b75f29..75140f0d1541 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3656,6 +3656,16 @@ L: linux-mips@...r.kernel.org
S: Maintained
F: drivers/firmware/broadcom/*
+BROADCOM PMB (POWER MANAGEMENT BUS) DRIVER
+M: Rafał Miłecki <rafal@...ecki.pl>
+M: Florian Fainelli <f.fainelli@...il.com>
+M: bcm-kernel-feedback-list@...adcom.com
+L: linux-pm@...r.kernel.org
+S: Maintained
+T: git git://github.com/broadcom/stblinux.git
+F: drivers/soc/bcm/bcm-pmb.c
+F: include/dt-bindings/soc/bcm-pmb.h
+
BROADCOM SPECIFIC AMBA DRIVER (BCMA)
M: Rafał Miłecki <zajec5@...il.com>
L: linux-wireless@...r.kernel.org
diff --git a/drivers/soc/bcm/Makefile b/drivers/soc/bcm/Makefile
index 7bc90e0bd773..0f0efa28d92b 100644
--- a/drivers/soc/bcm/Makefile
+++ b/drivers/soc/bcm/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_BCM2835_POWER) += bcm2835-power.o
obj-$(CONFIG_RASPBERRYPI_POWER) += raspberrypi-power.o
-obj-$(CONFIG_SOC_BCM63XX) += bcm63xx/
+obj-y += bcm63xx/
obj-$(CONFIG_SOC_BRCMSTB) += brcmstb/
diff --git a/drivers/soc/bcm/bcm63xx/Kconfig b/drivers/soc/bcm/bcm63xx/Kconfig
index 16f648a6c70a..9e501c8ac5ce 100644
--- a/drivers/soc/bcm/bcm63xx/Kconfig
+++ b/drivers/soc/bcm/bcm63xx/Kconfig
@@ -10,3 +10,12 @@ config BCM63XX_POWER
BCM6318, BCM6328, BCM6362 and BCM63268 SoCs.
endif # SOC_BCM63XX
+
+config BCM_PMB
+ bool "Broadcom PMB (Power Management Bus) driver"
+ depends on ARCH_BCM4908 || (COMPILE_TEST && OF)
+ default ARCH_BCM4908
+ select PM_GENERIC_DOMAINS if PM
+ help
+ This enables support for the Broadcom's PMB (Power Management Bus) that
+ is used for disabling and enabling SoC devices.
diff --git a/drivers/soc/bcm/bcm63xx/Makefile b/drivers/soc/bcm/bcm63xx/Makefile
index 0710d5e018cc..557eed3d67bd 100644
--- a/drivers/soc/bcm/bcm63xx/Makefile
+++ b/drivers/soc/bcm/bcm63xx/Makefile
@@ -1,2 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_BCM63XX_POWER) += bcm63xx-power.o
+obj-$(CONFIG_BCM_PMB) += bcm-pmb.o
diff --git a/drivers/soc/bcm/bcm63xx/bcm-pmb.c b/drivers/soc/bcm/bcm63xx/bcm-pmb.c
new file mode 100644
index 000000000000..c223023dc64f
--- /dev/null
+++ b/drivers/soc/bcm/bcm63xx/bcm-pmb.c
@@ -0,0 +1,333 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2013 Broadcom
+ * Copyright (C) 2020 Rafał Miłecki <rafal@...ecki.pl>
+ */
+
+#include <dt-bindings/soc/bcm-pmb.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/reset/bcm63xx_pmb.h>
+
+#define BPCM_ID_REG 0x00
+#define BPCM_CAPABILITIES 0x04
+#define BPCM_CAP_NUM_ZONES 0x000000ff
+#define BPCM_CAP_SR_REG_BITS 0x0000ff00
+#define BPCM_CAP_PLLTYPE 0x00030000
+#define BPCM_CAP_UBUS 0x00080000
+#define BPCM_CONTROL 0x08
+#define BPCM_STATUS 0x0c
+#define BPCM_ROSC_CONTROL 0x10
+#define BPCM_ROSC_THRESH_H 0x14
+#define BPCM_ROSC_THRESHOLD_BCM6838 0x14
+#define BPCM_ROSC_THRESH_S 0x18
+#define BPCM_ROSC_COUNT_BCM6838 0x18
+#define BPCM_ROSC_COUNT 0x1c
+#define BPCM_PWD_CONTROL_BCM6838 0x1c
+#define BPCM_PWD_CONTROL 0x20
+#define BPCM_SR_CONTROL_BCM6838 0x20
+#define BPCM_PWD_ACCUM_CONTROL 0x24
+#define BPCM_SR_CONTROL 0x28
+#define BPCM_GLOBAL_CONTROL 0x2c
+#define BPCM_MISC_CONTROL 0x30
+#define BPCM_MISC_CONTROL2 0x34
+#define BPCM_SGPHY_CNTL 0x38
+#define BPCM_SGPHY_STATUS 0x3c
+#define BPCM_ZONE0 0x40
+#define BPCM_ZONE_CONTROL 0x00
+#define BPCM_ZONE_CONTROL_MANUAL_CLK_EN 0x00000001
+#define BPCM_ZONE_CONTROL_MANUAL_RESET_CTL 0x00000002
+#define BPCM_ZONE_CONTROL_FREQ_SCALE_USED 0x00000004 /* R/O */
+#define BPCM_ZONE_CONTROL_DPG_CAPABLE 0x00000008 /* R/O */
+#define BPCM_ZONE_CONTROL_MANUAL_MEM_PWR 0x00000030
+#define BPCM_ZONE_CONTROL_MANUAL_ISO_CTL 0x00000040
+#define BPCM_ZONE_CONTROL_MANUAL_CTL 0x00000080
+#define BPCM_ZONE_CONTROL_DPG_CTL_EN 0x00000100
+#define BPCM_ZONE_CONTROL_PWR_DN_REQ 0x00000200
+#define BPCM_ZONE_CONTROL_PWR_UP_REQ 0x00000400
+#define BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN 0x00000800
+#define BPCM_ZONE_CONTROL_BLK_RESET_ASSERT 0x00001000
+#define BPCM_ZONE_CONTROL_MEM_STBY 0x00002000
+#define BPCM_ZONE_CONTROL_RESERVED 0x0007c000
+#define BPCM_ZONE_CONTROL_PWR_CNTL_STATE 0x00f80000
+#define BPCM_ZONE_CONTROL_FREQ_SCALAR_DYN_SEL 0x01000000 /* R/O */
+#define BPCM_ZONE_CONTROL_PWR_OFF_STATE 0x02000000 /* R/O */
+#define BPCM_ZONE_CONTROL_PWR_ON_STATE 0x04000000 /* R/O */
+#define BPCM_ZONE_CONTROL_PWR_GOOD 0x08000000 /* R/O */
+#define BPCM_ZONE_CONTROL_DPG_PWR_STATE 0x10000000 /* R/O */
+#define BPCM_ZONE_CONTROL_MEM_PWR_STATE 0x20000000 /* R/O */
+#define BPCM_ZONE_CONTROL_ISO_STATE 0x40000000 /* R/O */
+#define BPCM_ZONE_CONTROL_RESET_STATE 0x80000000 /* R/O */
+#define BPCM_ZONE_CONFIG1 0x04
+#define BPCM_ZONE_CONFIG2 0x08
+#define BPCM_ZONE_FREQ_SCALAR_CONTROL 0x0c
+#define BPCM_ZONE_SIZE 0x10
+
+struct bcm_pmb {
+ struct device *dev;
+ void __iomem *base;
+ spinlock_t lock;
+ bool little_endian;
+ struct genpd_onecell_data genpd_onecell_data;
+};
+
+struct bcm_pmb_pd_data {
+ const char * const name;
+ int id;
+ u8 bus;
+ u8 device;
+};
+
+struct bcm_pmb_pm_domain {
+ struct bcm_pmb *pmb;
+ const struct bcm_pmb_pd_data *data;
+ struct generic_pm_domain genpd;
+};
+
+static int bcm_pmb_bpcm_read(struct bcm_pmb *pmb, int bus, u8 device,
+ int offset, u32 *val)
+{
+ void __iomem *base = pmb->base + bus * 0x20;
+ unsigned long flags;
+ int err;
+
+ spin_lock_irqsave(&pmb->lock, flags);
+ err = bpcm_rd(base, device, offset, val);
+ spin_unlock_irqrestore(&pmb->lock, flags);
+
+ if (!err)
+ *val = pmb->little_endian ? le32_to_cpu(*val) : be32_to_cpu(*val);
+
+ return err;
+}
+
+static int bcm_pmb_bpcm_write(struct bcm_pmb *pmb, int bus, u8 device,
+ int offset, u32 val)
+{
+ void __iomem *base = pmb->base + bus * 0x20;
+ unsigned long flags;
+ int err;
+
+ val = pmb->little_endian ? cpu_to_le32(val) : cpu_to_be32(val);
+
+ spin_lock_irqsave(&pmb->lock, flags);
+ err = bpcm_wr(base, device, offset, val);
+ spin_unlock_irqrestore(&pmb->lock, flags);
+
+ return err;
+}
+
+static int bcm_pmb_power_off_zone(struct bcm_pmb *pmb, int bus, u8 device,
+ int zone)
+{
+ int offset;
+ u32 val;
+ int err;
+
+ offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
+ if (err)
+ return err;
+
+ val |= BPCM_ZONE_CONTROL_PWR_DN_REQ;
+ val &= ~BPCM_ZONE_CONTROL_PWR_UP_REQ;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
+
+ return err;
+}
+
+static int bcm_pmb_power_on_zone(struct bcm_pmb *pmb, int bus, u8 device,
+ int zone)
+{
+ int offset;
+ u32 val;
+ int err;
+
+ offset = BPCM_ZONE0 + zone * BPCM_ZONE_SIZE + BPCM_ZONE_CONTROL;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
+ if (err)
+ return err;
+
+ if (!(val & BPCM_ZONE_CONTROL_PWR_ON_STATE)) {
+ val &= ~BPCM_ZONE_CONTROL_PWR_DN_REQ;
+ val |= BPCM_ZONE_CONTROL_DPG_CTL_EN;
+ val |= BPCM_ZONE_CONTROL_PWR_UP_REQ;
+ val |= BPCM_ZONE_CONTROL_MEM_PWR_CTL_EN;
+ val |= BPCM_ZONE_CONTROL_BLK_RESET_ASSERT;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
+ }
+
+ return err;
+}
+
+static int bcm_pmb_power_off_device(struct bcm_pmb *pmb, int bus, u8 device)
+{
+ int offset;
+ u32 val;
+ int err;
+
+ /* Entire device can be powered off by powering off the 0th zone */
+ offset = BPCM_ZONE0 + BPCM_ZONE_CONTROL;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, offset, &val);
+ if (err)
+ return err;
+
+ if (!(val & BPCM_ZONE_CONTROL_PWR_OFF_STATE)) {
+ val = BPCM_ZONE_CONTROL_PWR_DN_REQ;
+
+ err = bcm_pmb_bpcm_write(pmb, bus, device, offset, val);
+ }
+
+ return err;
+}
+
+static int bcm_pmb_power_on_device(struct bcm_pmb *pmb, int bus, u8 device)
+{
+ u32 val;
+ int err;
+ int i;
+
+ err = bcm_pmb_bpcm_read(pmb, bus, device, BPCM_CAPABILITIES, &val);
+ if (err)
+ return err;
+
+ for (i = 0; i < (val & BPCM_CAP_NUM_ZONES); i++) {
+ err = bcm_pmb_power_on_zone(pmb, bus, device, i);
+ if (err)
+ return err;
+ }
+
+ return err;
+}
+
+static int bcm_pmb_power_on(struct generic_pm_domain *genpd)
+{
+ struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
+ const struct bcm_pmb_pd_data *data = pd->data;
+ struct bcm_pmb *pmb = pd->pmb;
+
+ switch (data->id) {
+ case BCM_PMB_PCIE0:
+ case BCM_PMB_PCIE1:
+ case BCM_PMB_PCIE2:
+ return bcm_pmb_power_on_zone(pmb, data->bus, data->device, 0);
+ case BCM_PMB_HOST_USB:
+ return bcm_pmb_power_on_device(pmb, data->bus, data->device);
+ default:
+ dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
+ return -EINVAL;
+ }
+}
+
+static int bcm_pmb_power_off(struct generic_pm_domain *genpd)
+{
+ struct bcm_pmb_pm_domain *pd = container_of(genpd, struct bcm_pmb_pm_domain, genpd);
+ const struct bcm_pmb_pd_data *data = pd->data;
+ struct bcm_pmb *pmb = pd->pmb;
+
+ switch (data->id) {
+ case BCM_PMB_PCIE0:
+ case BCM_PMB_PCIE1:
+ case BCM_PMB_PCIE2:
+ return bcm_pmb_power_off_zone(pmb, data->bus, data->device, 0);
+ case BCM_PMB_HOST_USB:
+ return bcm_pmb_power_off_device(pmb, data->bus, data->device);
+ default:
+ dev_err(pmb->dev, "unsupported device id: %d\n", data->id);
+ return -EINVAL;
+ }
+}
+
+static int bcm_pmb_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct bcm_pmb_pd_data *table;
+ const struct bcm_pmb_pd_data *e;
+ struct resource *res;
+ struct bcm_pmb *pmb;
+ int max_id;
+ int err;
+
+ pmb = devm_kzalloc(dev, sizeof(*pmb), GFP_KERNEL);
+ if (!pmb)
+ return -ENOMEM;
+
+ pmb->dev = dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pmb->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(pmb->base))
+ return PTR_ERR(pmb->base);
+
+ spin_lock_init(&pmb->lock);
+
+ pmb->little_endian = !of_device_is_big_endian(dev->of_node);
+
+ table = of_device_get_match_data(dev);
+ if (!table)
+ return -EINVAL;
+
+ max_id = 0;
+ for (e = table; e->name; e++)
+ max_id = max(max_id, e->id);
+
+ pmb->genpd_onecell_data.num_domains = max_id + 1;
+ pmb->genpd_onecell_data.domains =
+ devm_kcalloc(dev, pmb->genpd_onecell_data.num_domains,
+ sizeof(struct generic_pm_domain *), GFP_KERNEL);
+ if (!pmb->genpd_onecell_data.domains)
+ return -ENOMEM;
+
+ for (e = table; e->name; e++) {
+ struct bcm_pmb_pm_domain *pd = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL);
+
+ pd->pmb = pmb;
+ pd->data = e;
+ pd->genpd.name = e->name;
+ pd->genpd.power_on = bcm_pmb_power_on;
+ pd->genpd.power_off = bcm_pmb_power_off;
+
+ pm_genpd_init(&pd->genpd, NULL, true);
+ pmb->genpd_onecell_data.domains[e->id] = &pd->genpd;
+ }
+
+ err = of_genpd_add_provider_onecell(dev->of_node, &pmb->genpd_onecell_data);
+ if (err) {
+ dev_err(dev, "failed to add genpd provider: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+static const struct bcm_pmb_pd_data bcm_pmb_bcm4908_data[] = {
+ { .name = "pcie2", .id = BCM_PMB_PCIE2, .bus = 0, .device = 2, },
+ { .name = "pcie0", .id = BCM_PMB_PCIE0, .bus = 1, .device = 14, },
+ { .name = "pcie1", .id = BCM_PMB_PCIE1, .bus = 1, .device = 15, },
+ { .name = "usb", .id = BCM_PMB_HOST_USB, .bus = 1, .device = 17, },
+ { },
+};
+
+static const struct of_device_id bcm_pmb_of_match[] = {
+ { .compatible = "brcm,bcm4908-pmb", .data = &bcm_pmb_bcm4908_data, },
+ { },
+};
+
+static struct platform_driver bcm_pmb_driver = {
+ .driver = {
+ .name = "bcm-pmb",
+ .of_match_table = bcm_pmb_of_match,
+ },
+ .probe = bcm_pmb_probe,
+};
+
+builtin_platform_driver(bcm_pmb_driver);
--
2.26.2
Powered by blists - more mailing lists