[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAMuHMdX1bzRqZEvXod3QNx+SNybP85wpQ66=bxyQJ4kAoo6X1g@mail.gmail.com>
Date: Tue, 15 Dec 2020 12:44:17 +0100
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Jacopo Mondi <jacopo@...ndi.org>
Cc: Rob Herring <robh@...nel.org>,
Jacopo Mondi <jacopo+renesas@...ndi.org>,
Kieran Bingham <kieran.bingham+renesas@...asonboard.com>,
Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
Niklas Söderlund
<niklas.soderlund+renesas@...natech.se>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Media Mailing List <linux-media@...r.kernel.org>,
Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Hyun Kwon <hyunk@...inx.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Sergei Shtylyov <sergei.shtylyov@...il.com>
Subject: Re: [PATCH v5 2/8] dt-bindings: media: max9286: Document 'maxim,initial-reverse-channel-mV'
Hi Jacopo,
On Tue, Dec 15, 2020 at 12:14 PM Jacopo Mondi <jacopo@...ndi.org> wrote:
> On Mon, Nov 30, 2020 at 03:00:48PM -0700, Rob Herring wrote:
> > On Mon, Nov 16, 2020 at 02:52:59PM +0100, Jacopo Mondi wrote:
> > > Document the 'initial-reverse-channel-mV' vendor property in the
> > > bindings document of the max9286 driver.
> > >
> > > The newly introduced property allows to specifying the initial
> > > configuration of the GMSL reverse control channel to accommodate
> > > remote serializers pre-programmed with the high threshold power
> > > supply noise immunity enabled.
> > >
> > > Reviewed-by: Kieran Bingham <kieran.bingham+renesas@...asonboard.com>
> > > Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
> > > ---
> > > .../bindings/media/i2c/maxim,max9286.yaml | 23 +++++++++++++++++++
> > > 1 file changed, 23 insertions(+)
> > >
> > > diff --git a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > index 9ea827092fdd..f61234d204fa 100644
> > > --- a/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > +++ b/Documentation/devicetree/bindings/media/i2c/maxim,max9286.yaml
> > > @@ -51,6 +51,26 @@ properties:
> > > '#gpio-cells':
> > > const: 2
> > >
> > > + maxim,initial-reverse-channel-mV:
> >
> > Use standard unit suffix.
> >
>
> Which one ? :)
Documentation/devicetree/bindings/property-units.txt
> I see in v5.10 one 'mV', three 'mv', one 'millivolts', several
> 'microvolts'.
>
> I'll go with the majority and make this
> 'maxim,initial-reverse-channel-mv'
Wrong guess ;-)
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists