[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAHCN7xKdVv==YLtSa3n2hQk2T+f+FkLqKDNTYkP_3ynnY+xRCg@mail.gmail.com>
Date: Thu, 17 Dec 2020 11:58:11 -0600
From: Adam Ford <aford173@...il.com>
To: Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Linux-Renesas <linux-renesas-soc@...r.kernel.org>,
Adam Ford-BE <aford@...conembedded.com>,
Magnus Damm <magnus.damm@...il.com>,
Rob Herring <robh+dt@...nel.org>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
ALSA Development Mailing List <alsa-devel@...a-project.org>
Subject: Re: [PATCH 06/18] arm64: dts: renesas: beacon: Configure Audio CODEC clocks
On Thu, Dec 17, 2020 at 7:33 AM Adam Ford <aford173@...il.com> wrote:
>
> On Thu, Dec 17, 2020 at 5:12 AM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
> >
> > Hi Adam,
> >
> > CC alsa-devel
> >
> > On Sun, Dec 13, 2020 at 7:38 PM Adam Ford <aford173@...il.com> wrote:
> > > With the newly added configurable clock options, the audio CODEC can
> > > configure the mclk automatically. Add the reference to the versaclock.
> > > Since the devices on I2C5 can communicate at 400KHz, let's also increase
> > > that too
> > >
> > > Signed-off-by: Adam Ford <aford173@...il.com>
> >
> > Thanks for your patch!
> >
> > > --- a/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> > > +++ b/arch/arm64/boot/dts/renesas/beacon-renesom-baseboard.dtsi
> > > @@ -424,13 +424,15 @@ &i2c0 {
> > >
> > > &i2c5 {
> > > status = "okay";
> > > - clock-frequency = <100000>;
> > > + clock-frequency = <400000>;
> > > pinctrl-0 = <&i2c5_pins>;
> > > pinctrl-names = "default";
> > >
> > > codec: wm8962@1a {
> > > compatible = "wlf,wm8962";
> > > reg = <0x1a>;
> > > + clocks = <&versaclock6_bb 3>;
> > > + clock-names = "mclk";
> >
> > While the driver does get the (nameless) clock, the DT bindings lack any
> > mention of a clocks property. It would be good to update the bindings.
>
> Agreed. I'll push an update to add the clocks property.
>
I pushed a change to add the optional clock information to the
bindings txt file [1].
> >
> > Note that arch/arm/boot/dts/imx6-logicpd-baseboard.dtsi and
> > arch/arm64/boot/dts/freescale/imx8mm-beacon-baseboard.dtsi (both by your
> > hand) use "xclk" instead of "mclk"?
>
> On the schematics for the two imx boards, it's labeled as xclk, so it
> was named as such. For this board, the schematic names it mclk. The
> driver doesn't care about the clock-names property, so I'll just
> remove them.
I pushed patches to remove these nodes from the other boards [2].
I'll remove them if V2 of the patch series for the Renesas board.
adam
[1] - https://patchwork.kernel.org/project/alsa-devel/patch/20201217162740.1452000-1-aford173@gmail.com/
[2] - https://patchwork.kernel.org/project/linux-arm-kernel/list/?series=403739
>
> adam
> >
> > > DCVDD-supply = <®_audio>;
> > > DBVDD-supply = <®_audio>;
> > > AVDD-supply = <®_audio>;
> >
> > Gr{oetje,eeting}s,
> >
> > Geert
> >
> > --
> > Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
> >
> > In personal conversations with technical people, I call myself a hacker. But
> > when I'm talking to journalists I just say "programmer" or something like that.
> > -- Linus Torvalds
Powered by blists - more mailing lists