lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201217180638.22748-49-digetx@gmail.com>
Date:   Thu, 17 Dec 2020 21:06:38 +0300
From:   Dmitry Osipenko <digetx@...il.com>
To:     Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Mark Brown <broonie@...nel.org>,
        Liam Girdwood <lgirdwood@...il.com>,
        Ulf Hansson <ulf.hansson@...aro.org>,
        Mauro Carvalho Chehab <mchehab@...nel.org>,
        Rob Herring <robh+dt@...nel.org>,
        Peter Geis <pgwipeout@...il.com>,
        Nicolas Chauvet <kwizart@...il.com>,
        Krzysztof Kozlowski <krzk@...nel.org>,
        "Rafael J. Wysocki" <rjw@...ysocki.net>,
        Kevin Hilman <khilman@...nel.org>,
        Peter De Schrijver <pdeschrijver@...dia.com>,
        Viresh Kumar <vireshk@...nel.org>,
        Stephen Boyd <sboyd@...nel.org>,
        Michael Turquette <mturquette@...libre.com>
Cc:     devel@...verdev.osuosl.org, linux-kernel@...r.kernel.org,
        devicetree@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        linux-media@...r.kernel.org, linux-tegra@...r.kernel.org,
        linux-clk@...r.kernel.org
Subject: [PATCH v2 48/48] ARM: tegra: cardhu: Support CPU voltage scaling and thermal throttling

Enable CPU voltage scaling and thermal throttling on Tegra30 Cardhu board.

Signed-off-by: Dmitry Osipenko <digetx@...il.com>
---
 arch/arm/boot/dts/tegra30-cardhu.dtsi | 61 ++++++++++++++++++++++++++-
 1 file changed, 60 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi
index d74c9ca78a7f..08c0ea4e6228 100644
--- a/arch/arm/boot/dts/tegra30-cardhu.dtsi
+++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi
@@ -1,6 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "tegra30.dtsi"
+#include "tegra30-cpu-opp.dtsi"
+#include "tegra30-cpu-opp-microvolt.dtsi"
 
 /**
  * This file contains common DT entry for all fab version of Cardhu.
@@ -339,12 +342,13 @@ ldo8_reg: ldo8 {
 			};
 		};
 
-		temperature-sensor@4c {
+		nct1008: temperature-sensor@4c {
 			compatible = "onnn,nct1008";
 			reg = <0x4c>;
 			vcc-supply = <&sys_3v3_reg>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>;
+			#thermal-sensor-cells = <1>;
 		};
 
 		vdd_core: tps62361@60 {
@@ -438,6 +442,29 @@ clk32k_in: clock@0 {
 		#clock-cells = <0>;
 	};
 
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu@1 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@2 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+
+		cpu@3 {
+			cpu-supply = <&vddctrl_reg>;
+			operating-points-v2 = <&cpu0_opp_table>;
+		};
+	};
+
 	panel: panel {
 		compatible = "chunghwa,claa101wb01";
 		ddc-i2c-bus = <&panelddc>;
@@ -617,6 +644,38 @@ sound {
 					 <&tegra_car TEGRA30_CLK_EXTERN1>;
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip0: cpu-alert0 {
+					/* throttle at 57C until temperature drops to 56.8C */
+					temperature = <57000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: cpu-crit {
+					/* shut down at 60C */
+					temperature = <60000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
 	gpio-keys {
 		compatible = "gpio-keys";
 
-- 
2.29.2

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ