| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Thu, 17 Dec 2020 19:32:09 +0100
From: Hans de Goede <hdegoede@...hat.com>
To: Daniel Lezcano <daniel.lezcano@...aro.org>, rui.zhang@...el.com
Cc: amitk@...nel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org,
Thara Gopinath <thara.gopinath@...aro.org>,
Lukasz Luba <lukasz.luba@....com>,
Peter Kaestle <peter@...e.net>,
Mark Gross <mgross@...ux.intel.com>,
Support Opensource <support.opensource@...semi.com>,
Eduardo Valentin <edubezval@...il.com>,
Keerthy <j-keerthy@...com>,
"open list:ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER"
<platform-driver-x86@...r.kernel.org>,
"open list:TI BANDGAP AND THERMAL DRIVER"
<linux-omap@...r.kernel.org>
Subject: Re: [PATCH v2 3/3] thermal/core: Remove ms based delay fields
Hi Daniel,
On 12/16/20 11:03 PM, Daniel Lezcano wrote:
> The code does no longer use the ms unit based fields to set the
> delays as they are replaced by the jiffies.
>
> Remove them and replace their user to use the jiffies version instead.
>
> Cc: Thara Gopinath <thara.gopinath@...aro.org>
> Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
> Reviewed-by: Lukasz Luba <lukasz.luba@....com>
I assume that you will merge this through the thermal tree,
here is my ack for doing so for the pdx86 bits:
Acked-by: Hans de Goede <hdegoede@...hat.com>
Regards,
Hans
> ---
> drivers/platform/x86/acerhdf.c | 3 ++-
> drivers/thermal/da9062-thermal.c | 4 ++--
> drivers/thermal/gov_power_allocator.c | 2 +-
> drivers/thermal/thermal_core.c | 4 +---
> drivers/thermal/ti-soc-thermal/ti-thermal-common.c | 6 ++++--
> include/linux/thermal.h | 7 -------
> 6 files changed, 10 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
> index b6aa6e5514f4..6b8b3ab8db48 100644
> --- a/drivers/platform/x86/acerhdf.c
> +++ b/drivers/platform/x86/acerhdf.c
> @@ -336,7 +336,8 @@ static void acerhdf_check_param(struct thermal_zone_device *thermal)
> pr_notice("interval changed to: %d\n", interval);
>
> if (thermal)
> - thermal->polling_delay = interval*1000;
> + thermal->polling_delay_jiffies =
> + round_jiffies(msecs_to_jiffies(interval * 1000));
>
> prev_interval = interval;
> }
> diff --git a/drivers/thermal/da9062-thermal.c b/drivers/thermal/da9062-thermal.c
> index 4d74994f160a..180edec34e07 100644
> --- a/drivers/thermal/da9062-thermal.c
> +++ b/drivers/thermal/da9062-thermal.c
> @@ -95,7 +95,7 @@ static void da9062_thermal_poll_on(struct work_struct *work)
> thermal_zone_device_update(thermal->zone,
> THERMAL_EVENT_UNSPECIFIED);
>
> - delay = msecs_to_jiffies(thermal->zone->passive_delay);
> + delay = thermal->zone->passive_delay_jiffies;
> queue_delayed_work(system_freezable_wq, &thermal->work, delay);
> return;
> }
> @@ -245,7 +245,7 @@ static int da9062_thermal_probe(struct platform_device *pdev)
>
> dev_dbg(&pdev->dev,
> "TJUNC temperature polling period set at %d ms\n",
> - thermal->zone->passive_delay);
> + jiffies_to_msecs(thermal->zone->passive_delay_jiffies));
>
> ret = platform_get_irq_byname(pdev, "THERMAL");
> if (ret < 0) {
> diff --git a/drivers/thermal/gov_power_allocator.c b/drivers/thermal/gov_power_allocator.c
> index 7a4170a0b51f..f8c3d1e40b86 100644
> --- a/drivers/thermal/gov_power_allocator.c
> +++ b/drivers/thermal/gov_power_allocator.c
> @@ -258,7 +258,7 @@ static u32 pid_controller(struct thermal_zone_device *tz,
> * power being applied, slowing down the controller)
> */
> d = mul_frac(tz->tzp->k_d, err - params->prev_err);
> - d = div_frac(d, tz->passive_delay);
> + d = div_frac(d, jiffies_to_msecs(tz->passive_delay_jiffies));
> params->prev_err = err;
>
> power_range = p + i + d;
> diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c
> index d96c515af3cb..b2615449b18f 100644
> --- a/drivers/thermal/thermal_core.c
> +++ b/drivers/thermal/thermal_core.c
> @@ -313,7 +313,7 @@ static void monitor_thermal_zone(struct thermal_zone_device *tz)
>
> if (!stop && tz->passive)
> thermal_zone_device_set_polling(tz, tz->passive_delay_jiffies);
> - else if (!stop && tz->polling_delay)
> + else if (!stop && tz->polling_delay_jiffies)
> thermal_zone_device_set_polling(tz, tz->polling_delay_jiffies);
> else
> thermal_zone_device_set_polling(tz, 0);
> @@ -1307,8 +1307,6 @@ thermal_zone_device_register(const char *type, int trips, int mask,
> tz->device.class = &thermal_class;
> tz->devdata = devdata;
> tz->trips = trips;
> - tz->passive_delay = passive_delay;
> - tz->polling_delay = polling_delay;
>
> thermal_set_delay_jiffies(&tz->passive_delay_jiffies, passive_delay);
> thermal_set_delay_jiffies(&tz->polling_delay_jiffies, polling_delay);
> diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> index 2ce4b19f312a..f84375865c97 100644
> --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c
> @@ -166,6 +166,7 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
> char *domain)
> {
> struct ti_thermal_data *data;
> + int interval;
>
> data = ti_bandgap_get_sensor_data(bgp, id);
>
> @@ -183,9 +184,10 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id,
> return PTR_ERR(data->ti_thermal);
> }
>
> + interval = jiffies_to_msecs(data->ti_thermal->polling_delay_jiffies);
> +
> ti_bandgap_set_sensor_data(bgp, id, data);
> - ti_bandgap_write_update_interval(bgp, data->sensor_id,
> - data->ti_thermal->polling_delay);
> + ti_bandgap_write_update_interval(bgp, data->sensor_id, interval);
>
> return 0;
> }
> diff --git a/include/linux/thermal.h b/include/linux/thermal.h
> index d1b82c70de69..1e686404951b 100644
> --- a/include/linux/thermal.h
> +++ b/include/linux/thermal.h
> @@ -115,13 +115,8 @@ struct thermal_cooling_device {
> * @devdata: private pointer for device private data
> * @trips: number of trip points the thermal zone supports
> * @trips_disabled; bitmap for disabled trips
> - * @passive_delay: number of milliseconds to wait between polls when
> - * performing passive cooling.
> * @passive_delay_jiffies: number of jiffies to wait between polls when
> * performing passive cooling.
> - * @polling_delay: number of milliseconds to wait between polls when
> - * checking whether trip points have been crossed (0 for
> - * interrupt driven systems)
> * @polling_delay_jiffies: number of jiffies to wait between polls when
> * checking whether trip points have been crossed (0 for
> * interrupt driven systems)
> @@ -162,8 +157,6 @@ struct thermal_zone_device {
> unsigned long trips_disabled; /* bitmap for disabled trips */
> unsigned long passive_delay_jiffies;
> unsigned long polling_delay_jiffies;
> - int passive_delay;
> - int polling_delay;
> int temperature;
> int last_temperature;
> int emul_temperature;
>
Powered by blists - more mailing lists