lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sat, 19 Dec 2020 13:58:32 +0100
From:   Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To:     linux-kernel@...r.kernel.org
Cc:     Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        stable@...r.kernel.org, Ivan Vecera <ivecera@...hat.com>,
        Jay Vosburgh <j.vosburgh@...il.com>,
        Veaceslav Falico <vfalico@...il.com>,
        Andy Gospodarek <andy@...yhouse.net>,
        Jarod Wilson <jarod@...hat.com>,
        Jakub Kicinski <kuba@...nel.org>
Subject: [PATCH 5.9 28/49] bonding: fix feature flag setting at init time

From: Jarod Wilson <jarod@...hat.com>

[ Upstream commit 007ab5345545aba2f9cbe4c096cc35d2fd3275ac ]

Don't try to adjust XFRM support flags if the bond device isn't yet
registered. Bad things can currently happen when netdev_change_features()
is called without having wanted_features fully filled in yet. This code
runs both on post-module-load mode changes, as well as at module init
time, and when run at module init time, it is before register_netdevice()
has been called and filled in wanted_features. The empty wanted_features
led to features also getting emptied out, which was definitely not the
intended behavior, so prevent that from happening.

Originally, I'd hoped to stop adjusting wanted_features at all in the
bonding driver, as it's documented as being something only the network
core should touch, but we actually do need to do this to properly update
both the features and wanted_features fields when changing the bond type,
or we get to a situation where ethtool sees:

    esp-hw-offload: off [requested on]

I do think we should be using netdev_update_features instead of
netdev_change_features here though, so we only send notifiers when the
features actually changed.

Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load")
Reported-by: Ivan Vecera <ivecera@...hat.com>
Suggested-by: Ivan Vecera <ivecera@...hat.com>
Cc: Jay Vosburgh <j.vosburgh@...il.com>
Cc: Veaceslav Falico <vfalico@...il.com>
Cc: Andy Gospodarek <andy@...yhouse.net>
Signed-off-by: Jarod Wilson <jarod@...hat.com>
Link: https://lore.kernel.org/r/20201205172229.576587-1-jarod@redhat.com
Signed-off-by: Jakub Kicinski <kuba@...nel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
---
 drivers/net/bonding/bond_options.c |   22 +++++++++++++++-------
 include/net/bonding.h              |    2 --
 2 files changed, 15 insertions(+), 9 deletions(-)

--- a/drivers/net/bonding/bond_options.c
+++ b/drivers/net/bonding/bond_options.c
@@ -745,6 +745,19 @@ const struct bond_option *bond_opt_get(u
 	return &bond_opts[option];
 }
 
+static void bond_set_xfrm_features(struct net_device *bond_dev, u64 mode)
+{
+	if (!IS_ENABLED(CONFIG_XFRM_OFFLOAD))
+		return;
+
+	if (mode == BOND_MODE_ACTIVEBACKUP)
+		bond_dev->wanted_features |= BOND_XFRM_FEATURES;
+	else
+		bond_dev->wanted_features &= ~BOND_XFRM_FEATURES;
+
+	netdev_update_features(bond_dev);
+}
+
 static int bond_option_mode_set(struct bonding *bond,
 				const struct bond_opt_value *newval)
 {
@@ -767,13 +780,8 @@ static int bond_option_mode_set(struct b
 	if (newval->value == BOND_MODE_ALB)
 		bond->params.tlb_dynamic_lb = 1;
 
-#ifdef CONFIG_XFRM_OFFLOAD
-	if (newval->value == BOND_MODE_ACTIVEBACKUP)
-		bond->dev->wanted_features |= BOND_XFRM_FEATURES;
-	else
-		bond->dev->wanted_features &= ~BOND_XFRM_FEATURES;
-	netdev_change_features(bond->dev);
-#endif /* CONFIG_XFRM_OFFLOAD */
+	if (bond->dev->reg_state == NETREG_REGISTERED)
+		bond_set_xfrm_features(bond->dev, newval->value);
 
 	/* don't cache arp_validate between modes */
 	bond->params.arp_validate = BOND_ARP_VALIDATE_NONE;
--- a/include/net/bonding.h
+++ b/include/net/bonding.h
@@ -86,10 +86,8 @@
 #define bond_for_each_slave_rcu(bond, pos, iter) \
 	netdev_for_each_lower_private_rcu((bond)->dev, pos, iter)
 
-#ifdef CONFIG_XFRM_OFFLOAD
 #define BOND_XFRM_FEATURES (NETIF_F_HW_ESP | NETIF_F_HW_ESP_TX_CSUM | \
 			    NETIF_F_GSO_ESP)
-#endif /* CONFIG_XFRM_OFFLOAD */
 
 #ifdef CONFIG_NET_POLL_CONTROLLER
 extern atomic_t netpoll_block_tx;


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ