| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201221141906.48922-1-alexandru.ardelean@analog.com>
Date: Mon, 21 Dec 2020 16:19:04 +0200
From: Alexandru Ardelean <alexandru.ardelean@...log.com>
To: <linux-spi@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: <dragos.bogdan@...log.com>, <broonie@...nel.org>,
<robh+dt@...nel.org>, <andy.shevchenko@...il.com>,
Alexandru Ardelean <alexandru.ardelean@...log.com>
Subject: [PATCH v5 1/3] spi: uapi: unify SPI modes into a single spi.h header
This change moves all the SPI mode bits into a separate 'spi.h' header in
uAPI. This is meant to re-use these definitions inside the kernel as well
as export them to userspace (via uAPI).
The SPI mode definitions have usually been duplicated between between
'include/linux/spi/spi.h' and 'include/uapi/linux/spi/spidev.h', so
whenever adding a new entry, this would need to be put in both headers.
They've been moved from 'include/linux/spi/spi.h', since that seems a bit
more complete; the bits have descriptions and there is the SPI_MODE_X_MASK.
This change also does a conversion of these bitfields to _BITUL() macro.
Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@...log.com>
---
Changelog v4 -> v5:
* https://lore.kernel.org/linux-spi/20201203140531.74470-1-alexandru.ardelean@analog.com/
* added 'Reviewed-by: Andy Shevchenko <andy.shevchenko@...il.com>'
include/linux/spi/spi.h | 23 ++---------------------
include/uapi/linux/spi/spi.h | 31 +++++++++++++++++++++++++++++++
include/uapi/linux/spi/spidev.h | 30 +-----------------------------
3 files changed, 34 insertions(+), 50 deletions(-)
create mode 100644 include/uapi/linux/spi/spi.h
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index aa09fdc8042d..a08c3f37e202 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -15,6 +15,8 @@
#include <linux/gpio/consumer.h>
#include <linux/ptp_clock_kernel.h>
+#include <uapi/linux/spi/spi.h>
+
struct dma_chan;
struct property_entry;
struct spi_controller;
@@ -165,27 +167,6 @@ struct spi_device {
u8 bits_per_word;
bool rt;
u32 mode;
-#define SPI_CPHA 0x01 /* clock phase */
-#define SPI_CPOL 0x02 /* clock polarity */
-#define SPI_MODE_0 (0|0) /* (original MicroWire) */
-#define SPI_MODE_1 (0|SPI_CPHA)
-#define SPI_MODE_2 (SPI_CPOL|0)
-#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
-#define SPI_MODE_X_MASK (SPI_CPOL|SPI_CPHA)
-#define SPI_CS_HIGH 0x04 /* chipselect active high? */
-#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
-#define SPI_3WIRE 0x10 /* SI/SO signals shared */
-#define SPI_LOOP 0x20 /* loopback mode */
-#define SPI_NO_CS 0x40 /* 1 dev/bus, no chipselect */
-#define SPI_READY 0x80 /* slave pulls low to pause */
-#define SPI_TX_DUAL 0x100 /* transmit with 2 wires */
-#define SPI_TX_QUAD 0x200 /* transmit with 4 wires */
-#define SPI_RX_DUAL 0x400 /* receive with 2 wires */
-#define SPI_RX_QUAD 0x800 /* receive with 4 wires */
-#define SPI_CS_WORD 0x1000 /* toggle cs after each word */
-#define SPI_TX_OCTAL 0x2000 /* transmit with 8 wires */
-#define SPI_RX_OCTAL 0x4000 /* receive with 8 wires */
-#define SPI_3WIRE_HIZ 0x8000 /* high impedance turnaround */
int irq;
void *controller_state;
void *controller_data;
diff --git a/include/uapi/linux/spi/spi.h b/include/uapi/linux/spi/spi.h
new file mode 100644
index 000000000000..703b586f35df
--- /dev/null
+++ b/include/uapi/linux/spi/spi.h
@@ -0,0 +1,31 @@
+/* SPDX-License-Identifier: GPL-2.0+ WITH Linux-syscall-note */
+#ifndef _UAPI_SPI_H
+#define _UAPI_SPI_H
+
+#include <linux/const.h>
+
+#define SPI_CPHA _BITUL(0) /* clock phase */
+#define SPI_CPOL _BITUL(1) /* clock polarity */
+
+#define SPI_MODE_0 (0|0) /* (original MicroWire) */
+#define SPI_MODE_1 (0|SPI_CPHA)
+#define SPI_MODE_2 (SPI_CPOL|0)
+#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
+#define SPI_MODE_X_MASK (SPI_CPOL|SPI_CPHA)
+
+#define SPI_CS_HIGH _BITUL(2) /* chipselect active high? */
+#define SPI_LSB_FIRST _BITUL(3) /* per-word bits-on-wire */
+#define SPI_3WIRE _BITUL(4) /* SI/SO signals shared */
+#define SPI_LOOP _BITUL(5) /* loopback mode */
+#define SPI_NO_CS _BITUL(6) /* 1 dev/bus, no chipselect */
+#define SPI_READY _BITUL(7) /* slave pulls low to pause */
+#define SPI_TX_DUAL _BITUL(8) /* transmit with 2 wires */
+#define SPI_TX_QUAD _BITUL(9) /* transmit with 4 wires */
+#define SPI_RX_DUAL _BITUL(10) /* receive with 2 wires */
+#define SPI_RX_QUAD _BITUL(11) /* receive with 4 wires */
+#define SPI_CS_WORD _BITUL(12) /* toggle cs after each word */
+#define SPI_TX_OCTAL _BITUL(13) /* transmit with 8 wires */
+#define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */
+#define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */
+
+#endif /* _UAPI_SPI_H */
diff --git a/include/uapi/linux/spi/spidev.h b/include/uapi/linux/spi/spidev.h
index d56427c0b3e0..0c3da08f2aff 100644
--- a/include/uapi/linux/spi/spidev.h
+++ b/include/uapi/linux/spi/spidev.h
@@ -25,35 +25,7 @@
#include <linux/types.h>
#include <linux/ioctl.h>
-
-/* User space versions of kernel symbols for SPI clocking modes,
- * matching <linux/spi/spi.h>
- */
-
-#define SPI_CPHA 0x01
-#define SPI_CPOL 0x02
-
-#define SPI_MODE_0 (0|0)
-#define SPI_MODE_1 (0|SPI_CPHA)
-#define SPI_MODE_2 (SPI_CPOL|0)
-#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
-
-#define SPI_CS_HIGH 0x04
-#define SPI_LSB_FIRST 0x08
-#define SPI_3WIRE 0x10
-#define SPI_LOOP 0x20
-#define SPI_NO_CS 0x40
-#define SPI_READY 0x80
-#define SPI_TX_DUAL 0x100
-#define SPI_TX_QUAD 0x200
-#define SPI_RX_DUAL 0x400
-#define SPI_RX_QUAD 0x800
-#define SPI_CS_WORD 0x1000
-#define SPI_TX_OCTAL 0x2000
-#define SPI_RX_OCTAL 0x4000
-#define SPI_3WIRE_HIZ 0x8000
-
-/*---------------------------------------------------------------------------*/
+#include <linux/spi/spi.h>
/* IOCTL commands */
--
2.17.1
Powered by blists - more mailing lists