[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201221142322.GE33797@kozik-lap>
Date: Mon, 21 Dec 2020 15:23:22 +0100
From: Krzysztof Kozlowski <krzk@...nel.org>
To: Timon Baetz <timon.baetz@...tonmail.com>
Cc: Liam Girdwood <lgirdwood@...il.com>,
Mark Brown <broonie@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
MyungJoo Ham <myungjoo.ham@...sung.com>,
Chanwoo Choi <cw00.choi@...sung.com>,
Lee Jones <lee.jones@...aro.org>,
Sebastian Reichel <sre@...nel.org>,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-samsung-soc@...r.kernel.org, linux-pm@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH v2 5/6] ARM: dts: exynos: Added top-off charging
regulator node for i9100
On Mon, Dec 21, 2020 at 09:53:35AM +0000, Timon Baetz wrote:
> Value taken from Galaxy S2 vendor kernel [0] which always sets 200mA.
Subject: "Add", not "Added", as in Linux coding style.
>
> Also rearrange regulators based on definition in max8997.h.
>
> [0] https://github.com/krzk/linux-vendor-backup/blob/samsung/galaxy-s2-epic-4g-touch-sph-d710-exynos4210-dump/drivers/power/sec_battery_u1.c#L1525
>
> Signed-off-by: Timon Baetz <timon.baetz@...tonmail.com>
> ---
> arch/arm/boot/dts/exynos4210-i9100.dts | 21 ++++++++++++++-------
> 1 file changed, 14 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arm/boot/dts/exynos4210-i9100.dts b/arch/arm/boot/dts/exynos4210-i9100.dts
> index 586d801af0b5..fec6da64f7c1 100644
> --- a/arch/arm/boot/dts/exynos4210-i9100.dts
> +++ b/arch/arm/boot/dts/exynos4210-i9100.dts
> @@ -560,6 +560,16 @@ safe2_sreg: ESAFEOUT2 {
> regulator-boot-on;
> };
>
> + EN32KHZ_AP {
> + regulator-name = "EN32KHZ_AP";
> + regulator-always-on;
> + };
> +
> + EN32KHZ_CP {
> + regulator-name = "EN32KHZ_CP";
> + regulator-always-on;
> + };
> +
> charger_reg: CHARGER {
> regulator-name = "CHARGER";
> regulator-min-microamp = <200000>;
> @@ -573,13 +583,10 @@ chargercv_reg: CHARGER_CV {
> regulator-always-on;
> };
>
> - EN32KHZ_AP {
> - regulator-name = "EN32KHZ_AP";
> - regulator-always-on;
> - };
> -
> - EN32KHZ_CP {
> - regulator-name = "EN32KHZ_CP";
> + chargertopoff_reg: CHARGER_TOPOFF {
No need for label "chargertopoff_reg".
Best regards,
Krzysztof
Powered by blists - more mailing lists