linux-kernel - [PATCH 4/5] ARM: dts: meson8b: add the thermal-zones with cooling configuration

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201221181306.904272-5-martin.blumenstingl@googlemail.com>
Date:   Mon, 21 Dec 2020 19:13:05 +0100
From:   Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To:     linux-amlogic@...ts.infradead.org, khilman@...libre.com
Cc:     linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        narmstrong@...libre.com,
        Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH 4/5] ARM: dts: meson8b: add the thermal-zones with cooling configuration

The vendor kernel uses the following thermal-zone settings:
<= 70°C:
- CPU frequency limited to 1.488GHz
- GPU limited to 511MHz and 2 cores (pixel processors)

<= 80°C:
- CPU frequency limited to 1.2GHz
- GPU limited to 435MHz and 2 cores (pixel processors)

<= 90°C:
- CPU frequency limited to 0.804GHz
- GPU limited to 328MHz and 1 core (pixel processor)

Add simplified thermal configuration which is taken from the
GXBB/GXL/GXM SoC family (which uses the same manufacturing process and
has the same maximum junction temperature of 125°C). With this the
thermal framework will try to keep the SoC temperature at or below 80°C
which is identical to the vendor kernel (with the exception of one CPU
frequency step from 1.488GHz to 1.536GHz).

The number of GPU cores are not taken into account as this is not
supported.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
---
 arch/arm/boot/dts/meson8b.dtsi | 54 ++++++++++++++++++++++++++++++++++
 1 file changed, 54 insertions(+)

diff --git a/arch/arm/boot/dts/meson8b.dtsi b/arch/arm/boot/dts/meson8b.dtsi
index 2401cdf5f751..dbf7963b6c87 100644
--- a/arch/arm/boot/dts/meson8b.dtsi
+++ b/arch/arm/boot/dts/meson8b.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/power/meson8-power.h>
 #include <dt-bindings/reset/amlogic,meson8b-reset.h>
 #include <dt-bindings/reset/amlogic,meson8b-clkc-reset.h>
+#include <dt-bindings/thermal/thermal.h>
 #include "meson.dtsi"
 
 / {
@@ -26,6 +27,7 @@ cpu0: cpu@200 {
 			resets = <&clkc CLKC_RESET_CPU0_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu1: cpu@201 {
@@ -37,6 +39,7 @@ cpu1: cpu@201 {
 			resets = <&clkc CLKC_RESET_CPU1_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu2: cpu@202 {
@@ -48,6 +51,7 @@ cpu2: cpu@202 {
 			resets = <&clkc CLKC_RESET_CPU2_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 
 		cpu3: cpu@203 {
@@ -59,6 +63,7 @@ cpu3: cpu@203 {
 			resets = <&clkc CLKC_RESET_CPU3_SOFT_RESET>;
 			operating-points-v2 = <&cpu_opp_table>;
 			clocks = <&clkc CLKID_CPUCLK>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 
@@ -167,6 +172,54 @@ hwrom@0 {
 		};
 	};
 
+	thermal-zones {
+		soc {
+			polling-delay-passive = <250>; /* milliseconds */
+			polling-delay = <1000>; /* milliseconds */
+			thermal-sensors = <&thermal_sensor>;
+
+			cooling-maps {
+				map0 {
+					trip = <&soc_passive>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+
+				map1 {
+					trip = <&soc_hot>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+
+			trips {
+				soc_passive: soc-passive {
+					temperature = <80000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "passive";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <90000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "hot";
+				};
+
+				soc_critical: soc-critical {
+					temperature = <110000>; /* millicelsius */
+					hysteresis = <2000>; /* millicelsius */
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	mmcbus: bus@...00000 {
 		compatible = "simple-bus";
 		reg = <0xc8000000 0x8000>;
@@ -221,6 +274,7 @@ mali: gpu@...00 {
 			clocks = <&clkc CLKID_CLK81>, <&clkc CLKID_MALI>;
 			clock-names = "bus", "core";
 			operating-points-v2 = <&gpu_opp_table>;
+			#cooling-cells = <2>; /* min followed by max */
 		};
 	};
 }; /* end of / */
-- 
2.29.2