linux-kernel - Re: [PATCH] net: lantiq_etop: check the result of request

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <3197556a-8df8-3959-895b-e4b82de904aa@hauke-m.de>
Date:   Tue, 22 Dec 2020 00:41:07 +0100
From:   Hauke Mehrtens <hauke@...ke-m.de>
To:     Andrew Lunn <andrew@...n.ch>,
        Masahiro Yamada <masahiroy@...nel.org>
Cc:     "David S . Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Networking <netdev@...r.kernel.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        Miguel Ojeda <ojeda@...nel.org>, Arnd Bergmann <arnd@...db.de>,
        Heiner Kallweit <hkallweit1@...il.com>
Subject: Re: [PATCH] net: lantiq_etop: check the result of request_irq()

On 12/21/20 7:04 PM, Andrew Lunn wrote:
> On Tue, Dec 22, 2020 at 12:59:08AM +0900, Masahiro Yamada wrote:
>> On Tue, Dec 22, 2020 at 12:26 AM Andrew Lunn <andrew@...n.ch> wrote:
>>>
>>> On Mon, Dec 21, 2020 at 02:43:23PM +0900, Masahiro Yamada wrote:
>>>> The declaration of request_irq() in <linux/interrupt.h> is marked as
>>>> __must_check.
>>>>
>>>> Without the return value check, I see the following warnings:
>>>>
>>>> drivers/net/ethernet/lantiq_etop.c: In function 'ltq_etop_hw_init':
>>>> drivers/net/ethernet/lantiq_etop.c:273:4: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result [-Wunused-result]
>>>>    273 |    request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
>>>>        |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>> drivers/net/ethernet/lantiq_etop.c:281:4: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result [-Wunused-result]
>>>>    281 |    request_irq(irq, ltq_etop_dma_irq, 0, "etop_rx", priv);
>>>>        |    ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>>>>
>>>> Reported-by: Miguel Ojeda <ojeda@...nel.org>
>>>> Signed-off-by: Masahiro Yamada <masahiroy@...nel.org>
>>>> ---
>>>>
>>>>   drivers/net/ethernet/lantiq_etop.c | 13 +++++++++++--
>>>>   1 file changed, 11 insertions(+), 2 deletions(-)
>>>>
>>>> diff --git a/drivers/net/ethernet/lantiq_etop.c b/drivers/net/ethernet/lantiq_etop.c
>>>> index 2d0c52f7106b..960494f9752b 100644
>>>> --- a/drivers/net/ethernet/lantiq_etop.c
>>>> +++ b/drivers/net/ethernet/lantiq_etop.c
>>>> @@ -264,13 +264,18 @@ ltq_etop_hw_init(struct net_device *dev)
>>>>        for (i = 0; i < MAX_DMA_CHAN; i++) {
>>>>                int irq = LTQ_DMA_CH0_INT + i;
>>>>                struct ltq_etop_chan *ch = &priv->ch[i];
>>>> +             int ret;
>>>>
>>>>                ch->idx = ch->dma.nr = i;
>>>>                ch->dma.dev = &priv->pdev->dev;
>>>>
>>>>                if (IS_TX(i)) {
>>>>                        ltq_dma_alloc_tx(&ch->dma);
>>>> -                     request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
>>>> +                     ret = request_irq(irq, ltq_etop_dma_irq, 0, "etop_tx", priv);
>>>> +                     if (ret) {
>>>> +                             netdev_err(dev, "failed to request irq\n");
>>>> +                             return ret;
>>>
>>> You need to cleanup what ltq_dma_alloc_tx() did.
>>
>>
>> Any failure from this function will roll back
>> in the following paths:
>>
>>    ltq_etop_hw_exit()
>>       -> ltq_etop_free_channel()
>>            -> ltq_dma_free()
>>
>>
>> So, dma is freed anyway.
>>
>> One problem I see is,
>> ltq_etop_hw_exit() frees all DMA channels,
>> some of which may not have been allocated yet.
>>
>> If it is a bug, it is an existing bug.
>>
>>
>>>
>>>> +                     }
>>>>                } else if (IS_RX(i)) {
>>>>                        ltq_dma_alloc_rx(&ch->dma);
>>>>                        for (ch->dma.desc = 0; ch->dma.desc < LTQ_DESC_NUM;
>>>> @@ -278,7 +283,11 @@ ltq_etop_hw_init(struct net_device *dev)
>>>>                                if (ltq_etop_alloc_skb(ch))
>>>>                                        return -ENOMEM;
>>
>>
>> This -ENOMEM does not roll back anything here.
>>
>> As stated above, dma_free_coherent() is called.
>> The problem is, ltq_etop_hw_exit() rolls back too much.
>>
>> If your requirement is "this driver is completely wrong. Please rewrite it",
>> sorry, I cannot (unless I am paid to do so).
>>
>> I am just following this driver's roll-back model.
>>
>> Please do not expect more to a person who
>> volunteers to eliminate build warnings.
>>
>> Of course, if somebody volunteers to rewrite this driver correctly,
>> that is appreciated.
> 
> Hi Hauke
> 
> Do you still have this hardware? Do you have time to take a look at
> the cleanup code?
> 
> Thanks
> 	Andrew
> 

Hi Andrew,

I have this hardware somewhere at home, but I never made it work.
If I find some time I can have a loom at this problem in the next few weeks.

Hauke