[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20201222184425.7028-1-p.yadav@ti.com>
Date: Wed, 23 Dec 2020 00:14:18 +0530
From: Pratyush Yadav <p.yadav@...com>
To: Mark Brown <broonie@...nel.org>,
Vignesh Raghavendra <vigneshr@...com>
CC: Pratyush Yadav <p.yadav@...com>, <linux-spi@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 0/7] spi: cadence-quadspi: Add Octal DTR support
Hi,
This series adds support for Octal DTR mode now that SPI NOR supports
these flashes. Patches 1/7 to 4/7 and 6/7 fix some minor bugs and issues.
Patche 5/7 lays some groundwork by implementing the supports_op() hook.
Patch 7/7 adds the Octal DTR mode support.
While the main aim of this series is to support 8D-8D-8D mode, other
modes like 4D-4D-4D or 2S-2S-2S should also now be supported, though
they have not been tested.
Tested on J721E with Micron MT35XU512ABA and on J7200 with Cypress
S28HS512T. Tested on J721E with Micron MT25QU512A (1S-1S-4S) for
regressions.
Pratyush Yadav (7):
spi: cadence-quadspi: Set master max_speed_hz
spi: cadence-quadspi: Abort read if dummy cycles required are too many
spi: cadence-quadspi: Set dummy cycles from STIG commands
spi: cadence-quadspi: Fix dummy cycle calculation when buswidth > 1
spi: cadence-quadspi: Implement a simple supports_op hook
spi: cadence-quadspi: Wait at least 500 ms for direct reads
spi: cadence-quadspi: Add DTR support
drivers/spi/spi-cadence-quadspi.c | 364 ++++++++++++++++++++++++++----
1 file changed, 325 insertions(+), 39 deletions(-)
--
2.28.0
Powered by blists - more mailing lists