linux-kernel - [PATCH AUTOSEL 4.19 64/87] media: rcar-vin: Mask VNCSI

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20201223022103.2792705-64-sashal@kernel.org>
Date:   Tue, 22 Dec 2020 21:20:40 -0500
From:   Sasha Levin <sashal@...nel.org>
To:     linux-kernel@...r.kernel.org, stable@...r.kernel.org
Cc:     Jacopo Mondi <jacopo+renesas@...ndi.org>,
        Niklas Söderlund 
        <niklas.soderlund+renesas@...natech.se>,
        Hans Verkuil <hverkuil-cisco@...all.nl>,
        Mauro Carvalho Chehab <mchehab+huawei@...nel.org>,
        Sasha Levin <sashal@...nel.org>, linux-media@...r.kernel.org,
        linux-renesas-soc@...r.kernel.org
Subject: [PATCH AUTOSEL 4.19 64/87] media: rcar-vin: Mask VNCSI_IFMD register

From: Jacopo Mondi <jacopo+renesas@...ndi.org>

[ Upstream commit fb25ca37317200fa97ea6b8952e07958f06da7a6 ]

The VNCSI_IFMD register controls the data expansion mode and the
channel routing between the CSI-2 receivers and VIN instances.

According to the chip manual revision 2.20 not all fields are available
for all the SoCs:
- V3M, V3H and E3 do not support the DES1 field has they do not feature
  a CSI20 receiver.
- D3 only supports parallel input, and the whole register shall always
  be written as 0.

Inspect the per-SoC channel routing table where the available CSI-2
instances are reported and configure VNCSI_IFMD accordingly.

This patch supports this BSP change commit:

https://github.com/renesas-rcar/linux-bsp/commit/f54697394457
("media: rcar-vin: Fix VnCSI_IFMD register access for r8a77990")

[hverkuil: replace BSP commit ID with BSP URL]

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
Suggested-by: Niklas Söderlund <niklas.soderlund+renesas@...natech.se>
Signed-off-by: Jacopo Mondi <jacopo+renesas@...ndi.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@...all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@...nel.org>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
 drivers/media/platform/rcar-vin/rcar-dma.c | 25 +++++++++++++++++++---
 1 file changed, 22 insertions(+), 3 deletions(-)

diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
index 70a8cc433a03f..4fee9132472bb 100644
--- a/drivers/media/platform/rcar-vin/rcar-dma.c
+++ b/drivers/media/platform/rcar-vin/rcar-dma.c
@@ -1319,7 +1319,9 @@ int rvin_dma_register(struct rvin_dev *vin, int irq)
  */
 int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
 {
-	u32 ifmd, vnmc;
+	const struct rvin_group_route *route;
+	u32 ifmd = 0;
+	u32 vnmc;
 	int ret;
 
 	ret = pm_runtime_get_sync(vin->dev);
@@ -1332,9 +1334,26 @@ int rvin_set_channel_routing(struct rvin_dev *vin, u8 chsel)
 	vnmc = rvin_read(vin, VNMC_REG);
 	rvin_write(vin, vnmc & ~VNMC_VUP, VNMC_REG);
 
-	ifmd = VNCSI_IFMD_DES1 | VNCSI_IFMD_DES0 | VNCSI_IFMD_CSI_CHSEL(chsel);
+	/*
+	 * Set data expansion mode to "pad with 0s" by inspecting the routes
+	 * table to find out which bit fields are available in the IFMD
+	 * register. IFMD_DES1 controls data expansion mode for CSI20/21,
+	 * IFMD_DES0 controls data expansion mode for CSI40/41.
+	 */
+	for (route = vin->info->routes; route->mask; route++) {
+		if (route->csi == RVIN_CSI20 || route->csi == RVIN_CSI21)
+			ifmd |= VNCSI_IFMD_DES1;
+		else
+			ifmd |= VNCSI_IFMD_DES0;
 
-	rvin_write(vin, ifmd, VNCSI_IFMD_REG);
+		if (ifmd == (VNCSI_IFMD_DES0 | VNCSI_IFMD_DES1))
+			break;
+	}
+
+	if (ifmd) {
+		ifmd |= VNCSI_IFMD_CSI_CHSEL(chsel);
+		rvin_write(vin, ifmd, VNCSI_IFMD_REG);
+	}
 
 	vin_dbg(vin, "Set IFMD 0x%x\n", ifmd);
 
-- 
2.27.0