[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <OSAPR01MB368360D8A4E3AD1E6F928271D8DD0@OSAPR01MB3683.jpnprd01.prod.outlook.com>
Date: Thu, 24 Dec 2020 06:46:36 +0000
From: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
To: Lee Jones <lee.jones@...aro.org>
CC: "marek.vasut+renesas@...il.com" <marek.vasut+renesas@...il.com>,
"matti.vaittinen@...rohmeurope.com"
<matti.vaittinen@...rohmeurope.com>,
"lgirdwood@...il.com" <lgirdwood@...il.com>,
"broonie@...nel.org" <broonie@...nel.org>,
"linus.walleij@...aro.org" <linus.walleij@...aro.org>,
"bgolaszewski@...libre.com" <bgolaszewski@...libre.com>,
Khiem Nguyen <khiem.nguyen.xt@...esas.com>,
"linux-power@...rohmeurope.com" <linux-power@...rohmeurope.com>,
"linux-gpio@...r.kernel.org" <linux-gpio@...r.kernel.org>,
"linux-renesas-soc@...r.kernel.org"
<linux-renesas-soc@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [PATCH v6 11/12] mfd: bd9571mwv: Make the driver more generic
Hi Lee,
> From: Lee Jones, Sent: Thursday, December 24, 2020 12:39 AM
> On Wed, 23 Dec 2020, Yoshihiro Shimoda wrote:
> > From: Khiem Nguyen <khiem.nguyen.xt@...esas.com>
> >
> > Since the driver supports BD9571MWV PMIC only, this patch makes
> > the functions and data structure become more generic so that
> > it can support other PMIC variants as well. Also remove printing
> > part name which Lee Jones suggested.
> >
> > Signed-off-by: Khiem Nguyen <khiem.nguyen.xt@...esas.com>
> > Co-developed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
> > Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>
> > Reviewed-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
> > ---
> > drivers/mfd/bd9571mwv.c | 89 +++++++++++++++++++++++++------------------
> > include/linux/mfd/bd9571mwv.h | 18 +--------
> > 2 files changed, 54 insertions(+), 53 deletions(-)
>
> Couple of small points.
>
> Remainder looks good.
Thank you for your review!
> > diff --git a/drivers/mfd/bd9571mwv.c b/drivers/mfd/bd9571mwv.c
> > index 49e968e..c905ab4 100644
> > --- a/drivers/mfd/bd9571mwv.c
> > +++ b/drivers/mfd/bd9571mwv.c
> > @@ -3,6 +3,7 @@
> > * ROHM BD9571MWV-M MFD driver
> > *
> > * Copyright (C) 2017 Marek Vasut <marek.vasut+renesas@...il.com>
> > + * Copyright (C) 2020 Renesas Electronics Corporation
> > *
> > * Based on the TPS65086 driver
> > */
> > @@ -14,6 +15,14 @@
> >
> > #include <linux/mfd/bd9571mwv.h>
> >
> > +/* Driver data to distinguish bd957x variants */
> > +struct bd957x_ddata {
> > + const struct regmap_config *regmap_config;
> > + const struct regmap_irq_chip *irq_chip;
>
> > + const struct mfd_cell *cells;
> > + int num_cells;
>
> Are you using these post-probe?
>
> If not, they're not ddata.
I'm not using all these members post-probe.
So, I'll remove ddata.
<snip>
> > static int bd9571mwv_probe(struct i2c_client *client,
> > - const struct i2c_device_id *ids)
> > + const struct i2c_device_id *ids)
> > {
> > - struct bd9571mwv *bd;
> > - int ret;
> > -
> > - bd = devm_kzalloc(&client->dev, sizeof(*bd), GFP_KERNEL);
> > - if (!bd)
> > - return -ENOMEM;
> > -
> > - i2c_set_clientdata(client, bd);
> > - bd->dev = &client->dev;
> > - bd->irq = client->irq;
> > + const struct bd957x_ddata *ddata;
> > + struct device *dev = &client->dev;
> > + struct regmap *regmap;
> > + struct regmap_irq_chip_data *irq_data;
> > + int ret, irq = client->irq;
> > +
> > + /* Read the PMIC product code */
> > + ret = i2c_smbus_read_byte_data(client, BD9571MWV_PRODUCT_CODE);
> > + if (ret < 0) {
> > + dev_err(dev, "Failed to read product code\n");
> > + return ret;
> > + }
>
> Nit: '\n' here.
I got it. I'll add a blank line here.
> > + switch (ret) {
> > + case BD9571MWV_PRODUCT_CODE_BD9571MWV:
> > + ddata = &bd9571mwv_ddata;
>
> Simply declare 'const struct mfd_cell *cells' locally in probe and
> assign it here instead.
I got it. I'll also add "const struct regmap_config *regmap_config;"
and "const struct regmap_irq_chip *irq_chip;" locally in probe.
Best regards,
Yoshihiro Shimoda
Powered by blists - more mailing lists