| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20201225075258.33352-1-chunfeng.yun@mediatek.com>
Date: Fri, 25 Dec 2020 15:52:48 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Rob Herring <robh+dt@...nel.org>
CC: Chun-Kuang Hu <chunkuang.hu@...nel.org>,
Philipp Zabel <p.zabel@...gutronix.de>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>,
"David S . Miller" <davem@...emloft.net>,
Jakub Kicinski <kuba@...nel.org>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Kishon Vijay Abraham I <kishon@...com>,
Vinod Koul <vkoul@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Stanley Chu <stanley.chu@...iatek.com>,
Min Guo <min.guo@...iatek.com>,
<dri-devel@...ts.freedesktop.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-mediatek@...ts.infradead.org>, <linux-usb@...r.kernel.org>,
Serge Semin <Sergey.Semin@...kalelectronics.ru>
Subject: [PATCH v5 01/11] dt-bindings: usb: convert usb-device.txt to YAML schema
Convert usb-device.txt to YAML schema usb-device.yaml
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
---
v5: changes suggested by Rob:
1. limit the pattern length
2. remove properties description for hard wired USB devices in usb-hcd.yaml
depends on series:
https://patchwork.kernel.org/project/linux-usb/list/?series=399561
[v6,00/19] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema
v4: no changes, update dependent series:
https://patchwork.kernel.org/project/linux-usb/list/?series=399561
[v6,00/19] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema
v3:
1. remove $nodenmae and items key word for compatilbe;
2. add additionalProperties;
The followings are suggested by Rob:
3. merge the following patch
[v2,1/4] dt-bindings: usb: convert usb-device.txt to YAML schema
[v2,2/4] dt-bindings: usb: add properties for hard wired devices
4. define the unit-address for hard-wired device in usb-hcd.yaml,
also define its 'reg' and 'compatible';
5. This series is base on Serge's series:
https://patchwork.kernel.org/project/linux-usb/cover/20201111090853.14112-1-Sergey.Semin@baikalelectronics.ru/
[v4,00/18] dt-bindings: usb: Add generic USB HCD, xHCI, DWC USB3 DT schema
v2 changes suggested by Rob:
1. modify pattern to support any USB class
2. convert usb-device.txt into usb-device.yaml
---
.../devicetree/bindings/usb/usb-device.txt | 102 --------------
.../devicetree/bindings/usb/usb-device.yaml | 124 ++++++++++++++++++
.../devicetree/bindings/usb/usb-hcd.yaml | 19 +++
3 files changed, 143 insertions(+), 102 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/usb/usb-device.txt
create mode 100644 Documentation/devicetree/bindings/usb/usb-device.yaml
diff --git a/Documentation/devicetree/bindings/usb/usb-device.txt b/Documentation/devicetree/bindings/usb/usb-device.txt
deleted file mode 100644
index 036be172b1ae..000000000000
--- a/Documentation/devicetree/bindings/usb/usb-device.txt
+++ /dev/null
@@ -1,102 +0,0 @@
-Generic USB Device Properties
-
-Usually, we only use device tree for hard wired USB device.
-The reference binding doc is from:
-http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
-
-Four types of device-tree nodes are defined: "host-controller nodes"
-representing USB host controllers, "device nodes" representing USB devices,
-"interface nodes" representing USB interfaces and "combined nodes"
-representing simple USB devices.
-
-A combined node shall be used instead of a device node and an interface node
-for devices of class 0 or 9 (hub) with a single configuration and a single
-interface.
-
-A "hub node" is a combined node or an interface node that represents a USB
-hub.
-
-
-Required properties for device nodes:
-- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
- The textual representation of VID and PID shall be in lower case hexadecimal
- with leading zeroes suppressed. The other compatible strings from the above
- standard binding could also be used, but a device adhering to this binding
- may leave out all except for "usbVID,PID".
-- reg: the number of the USB hub port or the USB host-controller port to which
- this device is attached. The range is 1-255.
-
-
-Required properties for device nodes with interface nodes:
-- #address-cells: shall be 2
-- #size-cells: shall be 0
-
-
-Required properties for interface nodes:
-- compatible: "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
- the product id, CN is the configuration value and IN is the interface
- number. The textual representation of VID, PID, CN and IN shall be in lower
- case hexadecimal with leading zeroes suppressed. The other compatible
- strings from the above standard binding could also be used, but a device
- adhering to this binding may leave out all except for
- "usbifVID,PID.configCN.IN".
-- reg: the interface number and configuration value
-
-The configuration component is not included in the textual representation of
-an interface-node unit address for configuration 1.
-
-
-Required properties for combined nodes:
-- compatible: "usbVID,PID", where VID is the vendor id and PID the product id.
- The textual representation of VID and PID shall be in lower case hexadecimal
- with leading zeroes suppressed. The other compatible strings from the above
- standard binding could also be used, but a device adhering to this binding
- may leave out all except for "usbVID,PID".
-- reg: the number of the USB hub port or the USB host-controller port to which
- this device is attached. The range is 1-255.
-
-
-Required properties for hub nodes with device nodes:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-
-Required properties for host-controller nodes with device nodes:
-- #address-cells: shall be 1
-- #size-cells: shall be 0
-
-
-Example:
-
-&usb1 { /* host controller */
- #address-cells = <1>;
- #size-cells = <0>;
-
- hub@1 { /* hub connected to port 1 */
- compatible = "usb5e3,608";
- reg = <1>;
- };
-
- device@2 { /* device connected to port 2 */
- compatible = "usb123,4567";
- reg = <2>;
- };
-
- device@3 { /* device connected to port 3 */
- compatible = "usb123,abcd";
- reg = <3>;
-
- #address-cells = <2>;
- #size-cells = <0>;
-
- interface@0 { /* interface 0 of configuration 1 */
- compatible = "usbif123,abcd.config1.0";
- reg = <0 1>;
- };
-
- interface@0,2 { /* interface 0 of configuration 2 */
- compatible = "usbif123,abcd.config2.0";
- reg = <0 2>;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/usb/usb-device.yaml b/Documentation/devicetree/bindings/usb/usb-device.yaml
new file mode 100644
index 000000000000..7bb25a45427d
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/usb-device.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/usb-device.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: The device tree bindings for the Generic USB Device
+
+maintainers:
+ - Greg Kroah-Hartman <gregkh@...uxfoundation.org>
+
+description: |
+ Usually, we only use device tree for hard wired USB device.
+ The reference binding doc is from:
+ http://www.devicetree.org/open-firmware/bindings/usb/usb-1_0.ps
+
+ Four types of device-tree nodes are defined: "host-controller nodes"
+ representing USB host controllers, "device nodes" representing USB devices,
+ "interface nodes" representing USB interfaces and "combined nodes"
+ representing simple USB devices.
+
+ A combined node shall be used instead of a device node and an interface node
+ for devices of class 0 or 9 (hub) with a single configuration and a single
+ interface.
+
+ A "hub node" is a combined node or an interface node that represents a USB
+ hub.
+
+properties:
+ compatible:
+ pattern: "^usb[0-9a-f]{1,4},[0-9a-f]{1,4}$"
+ description: Device nodes or combined nodes.
+ "usbVID,PID", where VID is the vendor id and PID the product id.
+ The textual representation of VID and PID shall be in lower case
+ hexadecimal with leading zeroes suppressed. The other compatible
+ strings from the above standard binding could also be used,
+ but a device adhering to this binding may leave out all except
+ for "usbVID,PID".
+
+ reg:
+ description: the number of the USB hub port or the USB host-controller
+ port to which this device is attached. The range is 1-255.
+ maxItems: 1
+
+ "#address-cells":
+ description: should be 1 for hub nodes with device nodes,
+ should be 2 for device nodes with interface nodes.
+ enum: [1, 2]
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^interface@[0-9a-f]{1,2}(,[0-9a-f]{1,2})$":
+ type: object
+ description: USB interface nodes.
+ The configuration component is not included in the textual
+ representation of an interface-node unit address for configuration 1.
+
+ properties:
+ compatible:
+ pattern: "^usbif[0-9a-f]{1,4},[0-9a-f]{1,4}.config[0-9a-f]{1,2}.[0-9a-f]{1,2}$"
+ description: Interface nodes.
+ "usbifVID,PID.configCN.IN", where VID is the vendor id, PID is
+ the product id, CN is the configuration value and IN is the interface
+ number. The textual representation of VID, PID, CN and IN shall be
+ in lower case hexadecimal with leading zeroes suppressed.
+ The other compatible strings from the above standard binding could
+ also be used, but a device adhering to this binding may leave out
+ all except for "usbifVID,PID.configCN.IN".
+
+ reg:
+ description: should be 2 cells long, the first cell represents
+ the interface number and the second cell represents the
+ configuration value.
+ maxItems: 1
+
+required:
+ - compatile
+ - reg
+
+additionalProperties: true
+
+examples:
+ #hub connected to port 1
+ #device connected to port 2
+ #device connected to port 3
+ # interface 0 of configuration 1
+ # interface 0 of configuration 2
+ - |
+ usb@...70000 {
+ reg = <0x11270000 0x1000>;
+ interrupts = <0x0 0x4e 0x0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@1 {
+ compatible = "usb5e3,608";
+ reg = <1>;
+ };
+
+ device@2 {
+ compatible = "usb123,4567";
+ reg = <2>;
+ };
+
+ device@3 {
+ compatible = "usb123,abcd";
+ reg = <3>;
+
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ interface@0 {
+ compatible = "usbif123,abcd.config1.0";
+ reg = <0 1>;
+ };
+
+ interface@0,2 {
+ compatible = "usbif123,abcd.config2.0";
+ reg = <0 2>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 9881ac10380d..56853c17af66 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -23,6 +23,18 @@ properties:
targeted hosts (non-PC hosts).
type: boolean
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^.*@[0-9a-f]{1,2}$":
+ description: The hard wired USB devices
+ type: object
+ $ref: /usb/usb-device.yaml
+
additionalProperties: true
examples:
@@ -30,4 +42,11 @@ examples:
usb {
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hub@1 {
+ compatible = "usb5e3,610";
+ reg = <1>;
+ };
};
--
2.18.0
Powered by blists - more mailing lists