lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening PHC | |
Open Source and information security mailing list archives
| ||
|
Date: Fri, 25 Dec 2020 19:01:09 +0800 From: Xin Ji <xji@...logixsemi.com> To: Rob Herring <robh+dt@...nel.org>, David Airlie <airlied@...ux.ie>, Nicolas Boichat <drinkcat@...gle.com>, Hsin-Yi Wang <hsinyi@...omium.org> Cc: Daniel Vetter <daniel@...ll.ch>, Sam Ravnborg <sam@...nborg.org>, Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>, Maxime Ripard <mripard@...nel.org>, Mark Brown <broonie@...nel.org>, Ricardo CaƱuelo <ricardo.canuelo@...labora.com>, dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org, Sheng Pan <span@...logixsemi.com>, linux-kernel@...r.kernel.org Subject: [PATCH v1 1/2] dt-bindings: drm/bridge: anx7625: add DPI flag and swing setting Add DPI flag for distinguish MIPI input signal type, DSI or DPI. Add swing setting for adjusting DP tx PHY swing Signed-off-by: Xin Ji <xji@...logixsemi.com> --- .../bindings/display/bridge/analogix,anx7625.yaml | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml index 60585a4..34a7faf 100644 --- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml +++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml @@ -34,6 +34,14 @@ properties: description: used for reset chip control, RESET_N pin B7. maxItems: 1 + anx,swing-setting: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: an array of swing register setting for DP tx PHY + + anx,mipi-dpi-in: + $ref: /schemas/types.yaml#/definitions/uint32 + description: indicate the MIPI rx signal type is DPI or DSI + ports: type: object @@ -72,6 +80,17 @@ examples: reg = <0x58>; enable-gpios = <&pio 45 GPIO_ACTIVE_HIGH>; reset-gpios = <&pio 73 GPIO_ACTIVE_HIGH>; + anx,swing-setting = <0x00 0x14>, <0x01 0x54>, + <0x02 0x64>, <0x03 0x74>, <0x04 0x29>, + <0x05 0x7b>, <0x06 0x77>, <0x07 0x5b>, + <0x08 0x7f>, <0x0c 0x20>, <0x0d 0x60>, + <0x10 0x60>, <0x12 0x40>, <0x13 0x60>, + <0x14 0x14>, <0x15 0x54>, <0x16 0x64>, + <0x17 0x74>, <0x18 0x29>, <0x19 0x7b>, + <0x1a 0x77>, <0x1b 0x5b>, <0x1c 0x7f>, + <0x20 0x20>, <0x21 0x60>, <0x24 0x60>, + <0x26 0x40>, <0x27 0x60>; + anx,mipi-dpi-in = <0>; ports { #address-cells = <1>; -- 2.7.4
Powered by blists - more mailing lists