[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20201228124854.525019102@linuxfoundation.org>
Date: Mon, 28 Dec 2020 13:47:59 +0100
From: Greg Kroah-Hartman <gregkh@...uxfoundation.org>
To: linux-kernel@...r.kernel.org
Cc: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
stable@...r.kernel.org,
Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
Mika Westerberg <mika.westerberg@...ux.intel.com>,
Sasha Levin <sashal@...nel.org>
Subject: [PATCH 4.9 026/175] pinctrl: merrifield: Set default bias in case no particular value given
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
[ Upstream commit 0fa86fc2e28227f1e64f13867e73cf864c6d25ad ]
When GPIO library asks pin control to set the bias, it doesn't pass
any value of it and argument is considered boolean (and this is true
for ACPI GpioIo() / GpioInt() resources, by the way). Thus, individual
drivers must behave well, when they got the resistance value of 1 Ohm,
i.e. transforming it to sane default.
In case of Intel Merrifield pin control hardware the 20 kOhm sounds plausible
because it gives a good trade off between weakness and minimization of leakage
current (will be only 50 uA with the above choice).
Fixes: 4e80c8f50574 ("pinctrl: intel: Add Intel Merrifield pin controller support")
Depends-on: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@...ux.intel.com>
Signed-off-by: Sasha Levin <sashal@...nel.org>
---
drivers/pinctrl/intel/pinctrl-merrifield.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/pinctrl/intel/pinctrl-merrifield.c b/drivers/pinctrl/intel/pinctrl-merrifield.c
index 04d6fd2be08cc..8d0cff3146b87 100644
--- a/drivers/pinctrl/intel/pinctrl-merrifield.c
+++ b/drivers/pinctrl/intel/pinctrl-merrifield.c
@@ -731,6 +731,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin,
mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK;
bits |= BUFCFG_PU_EN;
+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 20000;
+
switch (arg) {
case 50000:
bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT;
@@ -751,6 +755,10 @@ static int mrfld_config_set_pin(struct mrfld_pinctrl *mp, unsigned int pin,
mask |= BUFCFG_Px_EN_MASK | BUFCFG_PUPD_VAL_MASK;
bits |= BUFCFG_PD_EN;
+ /* Set default strength value in case none is given */
+ if (arg == 1)
+ arg = 20000;
+
switch (arg) {
case 50000:
bits |= BUFCFG_PUPD_VAL_50K << BUFCFG_PUPD_VAL_SHIFT;
--
2.27.0
Powered by blists - more mailing lists