linux-kernel - [PATCH v2] mhi: use irq_flags if client driver configures it

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Tue, 29 Dec 2020 02:05:51 -0500
From:   Carl Huang <cjhuang@...eaurora.org>
To:     manivannan.sadhasivam@...aro.org
Cc:     hemantk@...eaurora.org, linux-arm-msm@...r.kernel.org,
        linux-kernel@...r.kernel.org, ath11k@...ts.infradead.org
Subject: [PATCH v2] mhi: use irq_flags if client driver configures it

If client driver has specified the irq_flags, mhi uses this specified
irq_flags. Otherwise, mhi uses default irq_flags.

The purpose of this change is to support one MSI vector for QCA6390.
MHI will use one same MSI vector too in this scenario.

In case of one MSI vector, IRQ_NO_BALANCING is needed when irq handler
is requested. The reason is if irq migration happens, the msi_data may
change too. However, the msi_data is already programmed to QCA6390
hardware during initialization phase. This msi_data inconsistence will
result in crash in kernel.

Another issue is in case of one MSI vector, IRQF_NO_SUSPEND will trigger
WARNINGS because QCA6390 wants to disable the IRQ during the suspend.

To avoid above two issues, QCA6390 driver specifies the irq_flags in case
of one MSI vector when mhi_register_controller is called.

Signed-off-by: Carl Huang <cjhuang@...eaurora.org>
---
v2:
- document irq_flags added to mhi_controller

 drivers/bus/mhi/core/init.c | 9 +++++++--
 include/linux/mhi.h         | 2 ++
 2 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/bus/mhi/core/init.c b/drivers/bus/mhi/core/init.c
index 0ffdebd..5f74e1e 100644
--- a/drivers/bus/mhi/core/init.c
+++ b/drivers/bus/mhi/core/init.c
@@ -148,12 +148,17 @@ int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl)
 {
 	struct mhi_event *mhi_event = mhi_cntrl->mhi_event;
 	struct device *dev = &mhi_cntrl->mhi_dev->dev;
+	unsigned long irq_flags = IRQF_SHARED | IRQF_NO_SUSPEND;
 	int i, ret;
 
+	/* if client driver has set irq_flags, use it */
+	if (mhi_cntrl->irq_flags)
+		irq_flags = mhi_cntrl->irq_flags;
+
 	/* Setup BHI_INTVEC IRQ */
 	ret = request_threaded_irq(mhi_cntrl->irq[0], mhi_intvec_handler,
 				   mhi_intvec_threaded_handler,
-				   IRQF_SHARED | IRQF_NO_SUSPEND,
+				   irq_flags,
 				   "bhi", mhi_cntrl);
 	if (ret)
 		return ret;
@@ -171,7 +176,7 @@ int mhi_init_irq_setup(struct mhi_controller *mhi_cntrl)
 
 		ret = request_irq(mhi_cntrl->irq[mhi_event->irq],
 				  mhi_irq_handler,
-				  IRQF_SHARED | IRQF_NO_SUSPEND,
+				  irq_flags,
 				  "mhi", mhi_event);
 		if (ret) {
 			dev_err(dev, "Error requesting irq:%d for ev:%d\n",
diff --git a/include/linux/mhi.h b/include/linux/mhi.h
index d4841e5..918cf6a 100644
--- a/include/linux/mhi.h
+++ b/include/linux/mhi.h
@@ -353,6 +353,7 @@ struct mhi_controller_config {
  * @fbc_download: MHI host needs to do complete image transfer (optional)
  * @pre_init: MHI host needs to do pre-initialization before power up
  * @wake_set: Device wakeup set flag
+ * @irq_flags: irq flags passed to request_irq (optional)
  *
  * Fields marked as (required) need to be populated by the controller driver
  * before calling mhi_register_controller(). For the fields marked as (optional)
@@ -442,6 +443,7 @@ struct mhi_controller {
 	bool fbc_download;
 	bool pre_init;
 	bool wake_set;
+	unsigned long irq_flags;
 };
 
 /**
-- 
2.7.4