Message-ID: <20201229145728.ghxgqiyzid7l2w2y@earth.universe>
Date:   Tue, 29 Dec 2020 15:57:28 +0100
From:   Sebastian Reichel <sre@...nel.org>
To:     Mike Looijmans <mike.looijmans@...ic.nl>
Cc:     linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] power/supply: Add ltc4162-l-charger

Hi,

Sorry for slow processing of this. Driver looks mostly fine, but I
do have some comments.

On Mon, Nov 02, 2020 at 10:21:31AM +0100, Mike Looijmans wrote:
> Add support for the LTC4162-L Li-Ion battery charger. The driver allows
> reading back telemetry and to set some charging options like the input
> current limit.
> 
> Signed-off-by: Mike Looijmans <mike.looijmans@...ic.nl>
> ---
> v2: Use microohm units instead of milliohm
>     Add interrupt support using smbalert
>     Support obtaining cell-count from devicetree
> v3: Fix overflows in calculations involving resistor values
> resent, mail bounced
> 
>  drivers/power/supply/Kconfig             |   8 +
>  drivers/power/supply/Makefile            |   1 +
>  drivers/power/supply/ltc4162-l-charger.c | 898 +++++++++++++++++++++++
>  3 files changed, 907 insertions(+)
>  create mode 100644 drivers/power/supply/ltc4162-l-charger.c
> 
> diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
> index eec646c568b7..23000976cb42 100644
> --- a/drivers/power/supply/Kconfig
> +++ b/drivers/power/supply/Kconfig
> @@ -513,6 +513,14 @@ config CHARGER_LT3651
>  	  Say Y to include support for the Analog Devices (Linear Technology)
>  	  LT3651 battery charger which reports its status via GPIO lines.
>  
> +config CHARGER_LTC4162L
> +	tristate "LTC4162-L charger"
> +	depends on I2C
> +	select REGMAP_I2C
> +	help
> +	  Say Y to include support for the Analog Devices (Linear Technology)
> +	  LTC4162-L battery charger connected to I2C.
> +
>  config CHARGER_MAX14577
>  	tristate "Maxim MAX14577/77836 battery charger driver"
>  	depends on MFD_MAX14577
> diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
> index dd4b86318cd9..17b1cf921c44 100644
> --- a/drivers/power/supply/Makefile
> +++ b/drivers/power/supply/Makefile
> @@ -70,6 +70,7 @@ obj-$(CONFIG_CHARGER_LP8788)	+= lp8788-charger.o
>  obj-$(CONFIG_CHARGER_GPIO)	+= gpio-charger.o
>  obj-$(CONFIG_CHARGER_MANAGER)	+= charger-manager.o
>  obj-$(CONFIG_CHARGER_LT3651)	+= lt3651-charger.o
> +obj-$(CONFIG_CHARGER_LTC4162L)	+= ltc4162-l-charger.o
>  obj-$(CONFIG_CHARGER_MAX14577)	+= max14577_charger.o
>  obj-$(CONFIG_CHARGER_DETECTOR_MAX14656)	+= max14656_charger_detector.o
>  obj-$(CONFIG_CHARGER_MAX77650)	+= max77650-charger.o
> diff --git a/drivers/power/supply/ltc4162-l-charger.c b/drivers/power/supply/ltc4162-l-charger.c
> new file mode 100644
> index 000000000000..b2f666113125
> --- /dev/null
> +++ b/drivers/power/supply/ltc4162-l-charger.c
> @@ -0,0 +1,898 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + *  Driver for Analog Devices (Linear Technology) LTC4162-L charger IC.
> + *  Copyright (C) 2020, Topic Embedded Products
> + */
> +
> +#include <linux/module.h>
> +#include <linux/delay.h>
> +#include <linux/of_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/power_supply.h>
> +#include <linux/i2c.h>
> +#include <linux/regmap.h>
> +
> +/* Registers (names based on what datasheet uses) */
> +#define LTC4162L_EN_LIMIT_ALERTS_REG		0x0D
> +#define LTC4162L_EN_CHARGER_STATE_ALERTS_REG	0x0E
> +#define LTC4162L_EN_CHARGE_STATUS_ALERTS_REG	0x0F
> +#define LTC4162L_CONFIG_BITS_REG		0x14
> +#define LTC4162L_IIN_LIMIT_TARGET		0x15
> +#define LTC4162L_ARM_SHIP_MODE			0x19
> +#define LTC4162L_CHARGE_CURRENT_SETTING		0X1A
> +#define LTC4162L_VCHARGE_SETTING		0X1B
> +#define LTC4162L_C_OVER_X_THRESHOLD		0x1C
> +#define LTC4162L_MAX_CV_TIME			0X1D
> +#define LTC4162L_MAX_CHARGE_TIME		0X1E
> +#define LTC4162L_CHARGER_CONFIG_BITS		0x29
> +#define LTC4162L_CHARGER_STATE			0x34
> +#define LTC4162L_CHARGE_STATUS			0x35
> +#define LTC4162L_LIMIT_ALERTS_REG		0x36
> +#define LTC4162L_CHARGER_STATE_ALERTS_REG	0x37
> +#define LTC4162L_CHARGE_STATUS_ALERTS_REG	0x38
> +#define LTC4162L_SYSTEM_STATUS_REG		0x39
> +#define LTC4162L_VBAT				0x3A
> +#define LTC4162L_VIN				0x3B
> +#define LTC4162L_VOUT				0x3C
> +#define LTC4162L_IBAT				0x3D
> +#define LTC4162L_IIN				0x3E
> +#define LTC4162L_DIE_TEMPERATURE		0x3F
> +#define LTC4162L_THERMISTOR_VOLTAGE		0x40
> +#define LTC4162L_BSR				0x41
> +#define LTC4162L_JEITA_REGION			0x42
> +#define LTC4162L_CHEM_CELLS_REG			0x43
> +#define LTC4162L_ICHARGE_DAC			0x44
> +#define LTC4162L_VCHARGE_DAC			0x45
> +#define LTC4162L_IIN_LIMIT_DAC			0x46
> +#define LTC4162L_VBAT_FILT			0x47
> +#define LTC4162L_INPUT_UNDERVOLTAGE_DAC		0x4B
> +
> +/* Enumeration as in datasheet. Individual bits are mutually exclusive. */
> +enum ltc4162l_state {
> +	battery_detection = 2048,
> +	charger_suspended = 256,
> +	precharge = 128,   /* trickle on low bat voltage */
> +	cc_cv_charge = 64, /* normal charge */
> +	ntc_pause = 32,
> +	timer_term = 16,
> +	c_over_x_term = 8, /* battery is full */
> +	max_charge_time_fault = 4,
> +	bat_missing_fault = 2,
> +	bat_short_fault = 1
> +};
> +
> +/* Individual bits are mutually exclusive. Only active in charging states.*/
> +enum ltc4162l_charge_status {
> +	ilim_reg_active = 32,
> +	thermal_reg_active = 16,
> +	vin_uvcl_active = 8,
> +	iin_limit_active = 4,
> +	constant_current = 2,
> +	constant_voltage = 1,
> +	charger_off = 0
> +};

+use BIT(0), BIT(1), ...

> +/* Magic number to write to ARM_SHIP_MODE register */
> +#define LTC4162L_ARM_SHIP_MODE_MAGIC 21325
> +
> +struct ltc4162l_info {
> +	struct i2c_client	*client;
> +	struct regmap		*regmap;
> +	struct power_supply	*charger;
> +	u32 rsnsb;	/* Series resistor that sets charge current, microOhm */
> +	u32 rsnsi;	/* Series resistor to measure input current, microOhm */
> +	u8 cell_count;	/* Number of connected cells, 0 while unknown */
> +};
> +
> +static u8 ltc4162l_get_cell_count(struct ltc4162l_info *info)
> +{
> +	int ret;
> +	unsigned int val;
> +
> +	/* Once read successfully */
> +	if (info->cell_count)
> +		return info->cell_count;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_CHEM_CELLS_REG, &val);
> +	if (ret)
> +		return 0;
> +
> +	/* Lower 4 bits is the cell count, or 0 if the chip doesn't know yet */
> +	val &= 0x0f;
> +	if (!val)
> +		return 0;
> +
> +	/* Once determined, keep the value */
> +	info->cell_count = val;
> +
> +	return val;
> +};
> +
> +/* Convert enum value to POWER_SUPPLY_STATUS value */
> +static int ltc4162l_state_decode(enum ltc4162l_state value)
> +{
> +	switch (value) {
> +	case precharge:
> +	case cc_cv_charge:
> +		return POWER_SUPPLY_STATUS_CHARGING;
> +	case c_over_x_term:
> +		return POWER_SUPPLY_STATUS_FULL;
> +	case bat_missing_fault:
> +	case bat_short_fault:
> +		return POWER_SUPPLY_STATUS_UNKNOWN;
> +	default:
> +		return POWER_SUPPLY_STATUS_NOT_CHARGING;
> +	}
> +};
> +
> +static int ltc4162l_get_status(struct ltc4162l_info *info,
> +			       union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, &regval);
> +	if (ret) {
> +		dev_err(&info->client->dev, "Failed to read CHARGER_STATE\n");
> +		return ret;
> +	}
> +
> +	val->intval = ltc4162l_state_decode(regval);
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_charge_status_decode(enum ltc4162l_charge_status value)
> +{
> +	if (!value)
> +		return POWER_SUPPLY_CHARGE_TYPE_NONE;
> +
> +	/* constant voltage/current and input_current limit are "fast" modes */
> +	if (value <= iin_limit_active)
> +		return POWER_SUPPLY_CHARGE_TYPE_FAST;
> +
> +	/* Anything that's not fast we'll return as trickle */
> +	return POWER_SUPPLY_CHARGE_TYPE_TRICKLE;
> +}
> +
> +static int ltc4162l_get_charge_type(struct ltc4162l_info *info,
> +				    union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, &regval);
> +	if (ret)
> +		return ret;
> +
> +	val->intval = ltc4162l_charge_status_decode(regval);
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_state_to_health(enum ltc4162l_state value)
> +{
> +	switch (value) {
> +	case ntc_pause:
> +		return POWER_SUPPLY_HEALTH_OVERHEAT;
> +	case timer_term:
> +		return POWER_SUPPLY_HEALTH_SAFETY_TIMER_EXPIRE;
> +	case max_charge_time_fault:
> +		return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
> +	case bat_missing_fault:
> +		return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
> +	case bat_short_fault:
> +		return POWER_SUPPLY_HEALTH_DEAD;
> +	default:
> +		return POWER_SUPPLY_HEALTH_GOOD;
> +	}
> +}
> +
> +static int ltc4162l_get_health(struct ltc4162l_info *info,
> +			       union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_CHARGER_STATE, &regval);
> +	if (ret)
> +		return ret;
> +
> +	val->intval = ltc4162l_state_to_health(regval);
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_get_online(struct ltc4162l_info *info,
> +			       union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_SYSTEM_STATUS_REG, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* BIT(2) indicates if input voltage is sufficient to charge */
> +	val->intval = !!(regval & BIT(2));
> +
> +	return 0;
> +}
> +
> +
> +static int ltc4162l_get_vbat(struct ltc4162l_info *info,
> +				  unsigned int reg,
> +				  union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, reg, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* cell_count × 192.4μV/LSB */
> +	regval *= 1924;
> +	regval *= ltc4162l_get_cell_count(info);
> +	regval /= 10;
> +	val->intval = regval;
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_get_ibat(struct ltc4162l_info *info,
> +			     union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_IBAT, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* Signed 16-bit number, 1.466μV / RSNSB amperes/LSB. */
> +	ret = (s16)(regval & 0xFFFF);
> +	val->intval = 100 * mult_frac(ret, 14660, (int)info->rsnsb);
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_get_icharge(struct ltc4162l_info *info,
> +				unsigned int reg,
> +				union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, reg, &regval);
> +	if (ret)
> +		return ret;
> +
> +	regval &= BIT(6) - 1; /* Only the lower 5 bits */
> +
> +	/* The charge current servo level: (icharge_dac + 1) × 1mV/RSNSB */
> +	++regval;
> +	val->intval = 10000u * mult_frac(regval, 100000u, info->rsnsb);
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_set_icharge(struct ltc4162l_info *info,
> +				unsigned int reg,
> +				unsigned int value)
> +{
> +	value = mult_frac(value, info->rsnsb, 100000u);
> +	value /= 10000u;
> +
> +	/* Round to lowest possible */
> +	if (value)
> +		--value;
> +
> +	if (value > 31)
> +		return -EINVAL;
> +
> +	return regmap_write(info->regmap, reg, value);
> +}
> +
> +
> +static int ltc4162l_get_vcharge(struct ltc4162l_info *info,
> +				unsigned int reg,
> +				union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +	u32 voltage;
> +
> +	ret = regmap_read(info->regmap, reg, &regval);
> +	if (ret)
> +		return ret;
> +
> +	regval &= BIT(6) - 1; /* Only the lower 5 bits */
> +
> +	/*
> +	 * charge voltage setting can be computed from
> +	 * cell_count × (vcharge_setting × 12.5mV + 3.8125V)
> +	 * where vcharge_setting ranges from 0 to 31 (4.2V max).
> +	 */
> +	voltage = 3812500 + (regval * 12500);
> +	voltage *= ltc4162l_get_cell_count(info);
> +	val->intval = voltage;
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_set_vcharge(struct ltc4162l_info *info,
> +				unsigned int reg,
> +				unsigned int value)
> +{
> +	u8 cell_count = ltc4162l_get_cell_count(info);
> +
> +	if (!cell_count)
> +		return -EBUSY; /* Not available yet, try again later */
> +
> +	value /= cell_count;
> +
> +	if (value < 3812500)
> +		return -EINVAL;
> +
> +	value -= 3812500;
> +	value /= 12500;
> +
> +	if (value > 31)
> +		return -EINVAL;
> +
> +	return regmap_write(info->regmap, reg, value);
> +}
> +
> +static int ltc4162l_get_iin_limit_dac(struct ltc4162l_info *info,
> +				     union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_IIN_LIMIT_DAC, &regval);
> +	if (ret)
> +		return ret;
> +
> +	regval &= BIT(6) - 1; /* Only 6 bits */
> +
> +	/* (iin_limit_dac + 1) × 500μV / RSNSI */
> +	++regval;
> +	regval *= 5000000u;
> +	regval /= info->rsnsi;
> +	val->intval = 100u * regval;
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_set_iin_limit(struct ltc4162l_info *info,
> +				  unsigned int value)
> +{
> +	unsigned int regval;
> +
> +	regval = mult_frac(value, info->rsnsi, 50000u);
> +	regval /= 10000u;
> +	if (regval)
> +		--regval;
> +	if (regval > 63)
> +		regval = 63;
> +
> +	return regmap_write(info->regmap, LTC4162L_IIN_LIMIT_TARGET, regval);
> +}
> +
> +static int ltc4162l_get_die_temp(struct ltc4162l_info *info,
> +				 union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_DIE_TEMPERATURE, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* die_temp × 0.0215°C/LSB - 264.4°C */
> +	ret = (s16)(regval & 0xFFFF);
> +	ret *= 215;
> +	ret /= 100; /* Centidegrees scale */
> +	ret -= 26440;
> +	val->intval = ret;
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_get_term_current(struct ltc4162l_info *info,
> +				     union power_supply_propval *val)
> +{
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_CHARGER_CONFIG_BITS, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* Check if C_OVER_X_THRESHOLD is enabled */
> +	if (!(regval & BIT(2))) {
> +		val->intval = 0;
> +		return 0;
> +	}
> +
> +	ret = regmap_read(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* 1.466μV / RSNSB amperes/LSB */
> +	regval *= 14660u;
> +	regval /= info->rsnsb;
> +	val->intval = 100 * regval;
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_set_term_current(struct ltc4162l_info *info,
> +				     unsigned int value)
> +{
> +	int ret;
> +	unsigned int regval;
> +
> +	if (!value) {
> +		/* Disable en_c_over_x_term when set to zero */
> +		return regmap_update_bits(info->regmap,
> +					  LTC4162L_CHARGER_CONFIG_BITS,
> +					  BIT(2), 0);
> +	}
> +
> +	regval = mult_frac(value, info->rsnsb, 14660u);
> +	regval /= 100u;
> +
> +	ret =  regmap_write(info->regmap, LTC4162L_C_OVER_X_THRESHOLD, regval);
> +	if (ret)
> +		return ret;
> +
> +	/* Set en_c_over_x_term after changing the threshold value */
> +	return regmap_update_bits(info->regmap, LTC4162L_CHARGER_CONFIG_BITS,
> +				  BIT(2), BIT(2));
> +}
> +
> +/* Custom properties */
> +static const char * const ltc4162l_charge_status_name[] = {
> +	"ilim_reg_active", /* 32 */
> +	"thermal_reg_active",
> +	"vin_uvcl_active",
> +	"iin_limit_active",
> +	"constant_current",
> +	"constant_voltage",
> +	"charger_off" /* 0 */
> +};
> +
> +static ssize_t charge_status_show(struct device *dev,
> +				  struct device_attribute *attr, char *buf)
> +{
> +	struct power_supply *psy = to_power_supply(dev);
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +	const char *result = ltc4162l_charge_status_name[
> +				ARRAY_SIZE(ltc4162l_charge_status_name) - 1];
> +	unsigned int regval;
> +	unsigned int mask;
> +	unsigned int index;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_CHARGE_STATUS, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* Only one bit is set according to datasheet, let's be safe here */
> +	for (mask = 32, index = 0; mask != 0; mask >>= 1, ++index) {
> +		if (regval & mask) {
> +			result = ltc4162l_charge_status_name[index];
> +			break;
> +		}
> +	}
> +
> +	return sprintf(buf, "%s\n", result);
> +}
> +static DEVICE_ATTR_RO(charge_status);
> +
> +static ssize_t input_voltage_show(struct device *dev,
> +				  struct device_attribute *attr, char *buf)
> +{
> +	struct power_supply *psy = to_power_supply(dev);
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_VIN, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* 1.649mV/LSB */
> +	regval *= 1694;
> +
> +	return sprintf(buf, "%u\n", regval);
> +}
> +static DEVICE_ATTR_RO(input_voltage);
> +
> +static ssize_t input_current_show(struct device *dev,
> +				  struct device_attribute *attr, char *buf)
> +{
> +	struct power_supply *psy = to_power_supply(dev);
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_IIN, &regval);
> +	if (ret)
> +		return ret;
> +
> +	/* Signed 16-bit number, 1.466μV / RSNSI amperes/LSB. */
> +	ret = (s16)(regval & 0xFFFF);
> +	ret *= 14660;
> +	ret /= info->rsnsi;
> +	ret *= 100;
> +
> +	return sprintf(buf, "%d\n", ret);
> +}
> +static DEVICE_ATTR_RO(input_current);
> +
> +static ssize_t force_telemetry_show(struct device *dev,
> +				    struct device_attribute *attr, char *buf)
> +{
> +	struct power_supply *psy = to_power_supply(dev);
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_CONFIG_BITS_REG, &regval);
> +	if (ret)
> +		return ret;
> +
> +	return sprintf(buf, "%u\n", regval & BIT(2) ? 1 : 0);
> +}
> +
> +static ssize_t force_telemetry_store(struct device *dev,
> +	struct device_attribute *attr,
> +	const char *buf,
> +	size_t count)
> +{
> +	struct power_supply *psy = to_power_supply(dev);
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +	int ret;
> +	unsigned int value;
> +
> +	ret = kstrtouint(buf, 0, &value);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_update_bits(info->regmap, LTC4162L_CONFIG_BITS_REG,
> +				 BIT(2), value ? BIT(2) : 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR_RW(force_telemetry);
> +
> +static ssize_t arm_ship_mode_show(struct device *dev,
> +				    struct device_attribute *attr, char *buf)
> +{
> +	struct power_supply *psy = to_power_supply(dev);
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +	unsigned int regval;
> +	int ret;
> +
> +	ret = regmap_read(info->regmap, LTC4162L_ARM_SHIP_MODE, &regval);
> +	if (ret)
> +		return ret;
> +
> +	return sprintf(buf, "%u\n",
> +		regval == LTC4162L_ARM_SHIP_MODE_MAGIC ? 1 : 0);
> +}
> +
> +static ssize_t arm_ship_mode_store(struct device *dev,
> +	struct device_attribute *attr,
> +	const char *buf,
> +	size_t count)
> +{
> +	struct power_supply *psy = to_power_supply(dev);
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +	int ret;
> +	unsigned int value;
> +
> +	ret = kstrtouint(buf, 0, &value);
> +	if (ret < 0)
> +		return ret;
> +
> +	ret = regmap_write(info->regmap, LTC4162L_ARM_SHIP_MODE,
> +				value ? LTC4162L_ARM_SHIP_MODE_MAGIC : 0);
> +	if (ret < 0)
> +		return ret;
> +
> +	return count;
> +}
> +
> +static DEVICE_ATTR_RW(arm_ship_mode);
> +
> +static struct attribute *ltc4162l_sysfs_entries[] = {
> +	&dev_attr_charge_status.attr,
> +	&dev_attr_input_voltage.attr,
> +	&dev_attr_input_current.attr,
> +	&dev_attr_force_telemetry.attr,
> +	&dev_attr_arm_ship_mode.attr,
> +	NULL,
> +};
> +
> +static struct attribute_group ltc4162l_attr_group = {
> +	.name	= NULL,	/* put in device directory */
> +	.attrs	= ltc4162l_sysfs_entries,
> +};
> +
> +static int ltc4162l_get_property(struct power_supply *psy,
> +				 enum power_supply_property psp,
> +				 union power_supply_propval *val)
> +{
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_STATUS:
> +		return ltc4162l_get_status(info, val);
> +	case POWER_SUPPLY_PROP_CHARGE_TYPE:
> +		return ltc4162l_get_charge_type(info, val);
> +	case POWER_SUPPLY_PROP_HEALTH:
> +		return ltc4162l_get_health(info, val);
> +	case POWER_SUPPLY_PROP_ONLINE:
> +		return ltc4162l_get_online(info, val);
> +	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
> +		return ltc4162l_get_vbat(info, LTC4162L_VBAT, val);
> +	case POWER_SUPPLY_PROP_VOLTAGE_AVG:
> +		return ltc4162l_get_vbat(info, LTC4162L_VBAT_FILT, val);
> +	case POWER_SUPPLY_PROP_CURRENT_NOW:
> +		return ltc4162l_get_ibat(info, val);
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT:
> +		return ltc4162l_get_icharge(info,
> +				LTC4162L_ICHARGE_DAC, val);
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> +		return ltc4162l_get_icharge(info,
> +				LTC4162L_CHARGE_CURRENT_SETTING, val);
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
> +		return ltc4162l_get_vcharge(info,
> +				LTC4162L_VCHARGE_DAC, val);
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> +		return ltc4162l_get_vcharge(info,
> +				LTC4162L_VCHARGE_SETTING, val);
> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> +		return ltc4162l_get_iin_limit_dac(info, val);
> +	case POWER_SUPPLY_PROP_TEMP:
> +		return ltc4162l_get_die_temp(info, val);
> +	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> +		return ltc4162l_get_term_current(info, val);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ltc4162l_set_property(struct power_supply *psy,
> +					 enum power_supply_property psp,
> +					 const union power_supply_propval *val)
> +{
> +	struct ltc4162l_info *info = power_supply_get_drvdata(psy);
> +
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> +		return ltc4162l_set_icharge(info,
> +				LTC4162L_CHARGE_CURRENT_SETTING, val->intval);
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> +		return ltc4162l_set_vcharge(info,
> +				LTC4162L_VCHARGE_SETTING, val->intval);
> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> +		return ltc4162l_set_iin_limit(info, val->intval);
> +	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> +		return ltc4162l_set_term_current(info, val->intval);
> +	default:
> +		return -EINVAL;
> +	}
> +}
> +
> +static int ltc4162l_property_is_writeable(struct power_supply *psy,
> +						enum power_supply_property psp)
> +{
> +	switch (psp) {
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
> +	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
> +	case POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT:
> +	case POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT:
> +		return 1;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +/* Charger power supply property routines */
> +static enum power_supply_property ltc4162l_properties[] = {
> +	POWER_SUPPLY_PROP_STATUS,
> +	POWER_SUPPLY_PROP_CHARGE_TYPE,
> +	POWER_SUPPLY_PROP_HEALTH,
> +	POWER_SUPPLY_PROP_ONLINE,
> +	POWER_SUPPLY_PROP_VOLTAGE_NOW, /* Reports battery voltage */
> +	POWER_SUPPLY_PROP_VOLTAGE_AVG,
> +	POWER_SUPPLY_PROP_CURRENT_NOW, /* Reports battery current */

above 3 properties should describe input voltage/current for chargers,
see Documentation/ABI/testing/sysfs-class-power

Battery IBAT and VBAT can currently only be reported from
POWER_SUPPLY_TYPE_BATTERY.

> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE,
> +	POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
> +	POWER_SUPPLY_PROP_INPUT_CURRENT_LIMIT,
> +	POWER_SUPPLY_PROP_TEMP,
> +	POWER_SUPPLY_PROP_CHARGE_TERM_CURRENT,
> +};
> +
> +static const struct power_supply_desc ltc4162l_desc = {
> +	.name		= "ltc4162-l",
> +	.type		= POWER_SUPPLY_TYPE_MAINS,
> +	.properties	= ltc4162l_properties,
> +	.num_properties	= ARRAY_SIZE(ltc4162l_properties),
> +	.get_property	= ltc4162l_get_property,
> +	.set_property	= ltc4162l_set_property,
> +	.property_is_writeable = ltc4162l_property_is_writeable,
> +};
> +
> +static bool ltc4162l_is_writeable_reg(struct device *dev, unsigned int reg)
> +{
> +	/* all registers up to this one are writeable */
> +	if (reg <= LTC4162L_CHARGER_CONFIG_BITS)
> +		return true;
> +
> +	/* The ALERTS registers can be written to clear alerts */
> +	if (reg >= LTC4162L_LIMIT_ALERTS_REG &&
> +	    reg <= LTC4162L_CHARGE_STATUS_ALERTS_REG)
> +		return true;
> +
> +	return false;
> +}
> +
> +static bool ltc4162l_is_volatile_reg(struct device *dev, unsigned int reg)
> +{
> +	/* all registers after this one are read-only status registers */
> +	return reg > LTC4162L_CHARGER_CONFIG_BITS;
> +}
> +
> +static const struct regmap_config ltc4162l_regmap_config = {
> +	.reg_bits	= 8,
> +	.val_bits	= 16,
> +	.val_format_endian = REGMAP_ENDIAN_LITTLE,
> +	.writeable_reg	= ltc4162l_is_writeable_reg,
> +	.volatile_reg	= ltc4162l_is_volatile_reg,
> +	.max_register	= LTC4162L_INPUT_UNDERVOLTAGE_DAC,
> +	.cache_type	= REGCACHE_RBTREE,
> +};
> +
> +static void ltc4162l_clear_interrupts(struct ltc4162l_info *info)
> +{
> +	/* Acknowledge interrupt to chip by clearing all events */
> +	regmap_write(info->regmap, LTC4162L_LIMIT_ALERTS_REG, 0);
> +	regmap_write(info->regmap, LTC4162L_CHARGER_STATE_ALERTS_REG, 0);
> +	regmap_write(info->regmap, LTC4162L_CHARGE_STATUS_ALERTS_REG, 0);
> +}
> +
> +static int ltc4162l_probe(struct i2c_client *client,
> +			const struct i2c_device_id *id)
> +{
> +	struct i2c_adapter *adapter = client->adapter;
> +	struct device *dev = &client->dev;
> +	struct ltc4162l_info *info;
> +	struct power_supply_config ltc4162l_config = {};
> +	u32 value;
> +	int ret;
> +
> +	if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA)) {
> +		dev_err(dev, "No support for SMBUS_WORD_DATA\n");
> +		return -ENODEV;
> +	}
> +	info = devm_kzalloc(dev, sizeof(*info), GFP_KERNEL);
> +	if (!info)
> +		return -ENOMEM;
> +
> +	info->client = client;
> +	i2c_set_clientdata(client, info);
> +
> +	info->regmap = devm_regmap_init_i2c(client, &ltc4162l_regmap_config);
> +	if (IS_ERR(info->regmap)) {
> +		dev_err(dev, "Failed to initialize register map\n");
> +		return PTR_ERR(info->regmap);
> +	}
> +
> +	ret = device_property_read_u32(dev, "lltc,rsnsb-micro-ohms",
> +				       &info->rsnsb);
> +	if (ret) {
> +		dev_err(dev, "Missing lltc,rsnsb-micro-ohms property\n");
> +		return ret;
> +	}
> +	if (!info->rsnsb)
> +		return -EINVAL;
> +
> +	ret = device_property_read_u32(dev, "lltc,rsnsi-micro-ohms",
> +				       &info->rsnsi);
> +	if (ret) {
> +		dev_err(dev, "Missing lltc,rsnsi-micro-ohms property\n");
> +		return ret;
> +	}
> +	if (!info->rsnsi)
> +		return -EINVAL;
> +
> +	if (!device_property_read_u32(dev, "lltc,cell-count", &value))
> +		info->cell_count = value;
> +
> +	ltc4162l_config.of_node = dev->of_node;
> +	ltc4162l_config.drv_data = info;
> +
> +	info->charger = devm_power_supply_register(dev, &ltc4162l_desc,
> +						   &ltc4162l_config);
> +	if (IS_ERR(info->charger)) {
> +		dev_err(dev, "Failed to register charger\n");
> +		return PTR_ERR(info->charger);
> +	}
> +
> +	ret = sysfs_create_group(&info->charger->dev.kobj,
> +				 &ltc4162l_attr_group);
> +	if (ret)
> +		dev_err(dev, "failed to create extra sysfs entries\n");

please use '.attr_grp' in ltc4162l_config, which means the
attributes are registered together with the power-supply
device avoiding a udev race condition. The change also
simplifies the driver code, since (de)registration happens
automatically :)

> +	/* Disable the threshold alerts, we're not using them */
> +	regmap_write(info->regmap, LTC4162L_EN_LIMIT_ALERTS_REG, 0);
> +
> +	/* Enable interrupts on all status changes */
> +	regmap_write(info->regmap, LTC4162L_EN_CHARGER_STATE_ALERTS_REG,
> +		     0x1fff);
> +	regmap_write(info->regmap, LTC4162L_EN_CHARGE_STATUS_ALERTS_REG, 0x1f);
> +
> +	ltc4162l_clear_interrupts(info);
> +
> +	return 0;
> +}
> +
> +static int ltc4162l_remove(struct i2c_client *client)
> +{
> +	struct ltc4162l_info *info = i2c_get_clientdata(client);
> +
> +	sysfs_remove_group(&info->charger->dev.kobj, &ltc4162l_attr_group);
> +
> +	return 0;
> +}
> +
> +static void ltc4162l_alert(struct i2c_client *client,
> +			   enum i2c_alert_protocol type, unsigned int flag)
> +{
> +	struct ltc4162l_info *info = i2c_get_clientdata(client);
> +
> +	if (type != I2C_PROTOCOL_SMBUS_ALERT)
> +		return;
> +
> +	ltc4162l_clear_interrupts(info);
> +	power_supply_changed(info->charger);
> +}
> +
> +static const struct i2c_device_id ltc4162l_i2c_id_table[] = {
> +	{ "ltc4162-l", 0 },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(i2c, ltc4162l_i2c_id_table);
> +
> +static const struct of_device_id ltc4162l_of_match[] = {
> +	{ .compatible = "lltc,ltc4162-l", },
> +	{ },
> +};
> +MODULE_DEVICE_TABLE(of, ltc4162l_of_match);
> +
> +static struct i2c_driver ltc4162l_driver = {
> +	.probe		= ltc4162l_probe,
> +	.remove		= ltc4162l_remove,
> +	.alert		= ltc4162l_alert,
> +	.id_table	= ltc4162l_i2c_id_table,
> +	.driver = {
> +		.name		= "ltc4162-l-charger",
> +		.of_match_table	= of_match_ptr(ltc4162l_of_match),
> +	},
> +};
> +module_i2c_driver(ltc4162l_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Mike Looijmans <mike.looijmans@...ic.nl>");
> +MODULE_DESCRIPTION("LTC4162-L charger driver");

Otherwise LGTM. Please send bindings and driver as a series next
time :)

Thanks,

-- Sebastian

Download attachment "signature.asc" of type "application/pgp-signature" (834 bytes)

Powered by blists - more mailing lists