linux-kernel - [PATCH 3/3] thermal: ti-soc-thermal: Use non-inverted define for omap4

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Wed, 30 Dec 2020 10:43:38 +0200
From:   Tony Lindgren <tony@...mide.com>
To:     Amit Kucheria <amitk@...nel.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Zhang Rui <rui.zhang@...el.com>
Cc:     Eduardo Valentin <edubezval@...il.com>, Keerthy <j-keerthy@...com>,
        linux-pm@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-omap@...r.kernel.org, Adam Ford <aford173@...il.com>,
        Carl Philipp Klemm <philipp@...s.xyz>,
        Merlijn Wajer <merlijn@...zup.org>,
        Pavel Machek <pavel@....cz>,
        Peter Ujfalusi <peter.ujfalusi@...il.com>,
        Sebastian Reichel <sre@...nel.org>
Subject: [PATCH 3/3] thermal: ti-soc-thermal: Use non-inverted define for omap4

When we set bit 10 high we use continuous mode and not single
mode. Let's correct this to avoid confusion. No functional
changes here, the code does the right thing with bit 10.

Cc: Adam Ford <aford173@...il.com>
Cc: Carl Philipp Klemm <philipp@...s.xyz>
Cc: Eduardo Valentin <edubezval@...il.com>
Cc: Merlijn Wajer <merlijn@...zup.org>
Cc: Pavel Machek <pavel@....cz>
Cc: Peter Ujfalusi <peter.ujfalusi@...il.com>
Cc: Sebastian Reichel <sre@...nel.org>
Signed-off-by: Tony Lindgren <tony@...mide.com>
---
 drivers/thermal/ti-soc-thermal/omap4-thermal-data.c | 4 ++--
 drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h   | 4 ++--
 2 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
--- a/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
+++ b/drivers/thermal/ti-soc-thermal/omap4-thermal-data.c
@@ -24,7 +24,7 @@ omap4430_mpu_temp_sensor_registers = {
 	.bgap_dtemp_mask = OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK,
 
 	.bgap_mode_ctrl = OMAP4430_TEMP_SENSOR_CTRL_OFFSET,
-	.mode_ctrl_mask = OMAP4430_SINGLE_MODE_MASK,
+	.mode_ctrl_mask = OMAP4430_CONTINUOUS_MODE_MASK,
 
 	.bgap_efuse = OMAP4430_FUSE_OPP_BGAP,
 };
@@ -97,7 +97,7 @@ omap4460_mpu_temp_sensor_registers = {
 	.mask_cold_mask = OMAP4460_MASK_COLD_MASK,
 
 	.bgap_mode_ctrl = OMAP4460_BGAP_CTRL_OFFSET,
-	.mode_ctrl_mask = OMAP4460_SINGLE_MODE_MASK,
+	.mode_ctrl_mask = OMAP4460_CONTINUOUS_MODE_MASK,
 
 	.bgap_counter = OMAP4460_BGAP_COUNTER_OFFSET,
 	.counter_mask = OMAP4460_COUNTER_MASK,
diff --git a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
--- a/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/omap4xxx-bandgap.h
@@ -40,7 +40,7 @@
 /* OMAP4430.TEMP_SENSOR bits */
 #define OMAP4430_BGAP_TEMPSOFF_MASK			BIT(12)
 #define OMAP4430_BGAP_TSHUT_MASK			BIT(11)
-#define OMAP4430_SINGLE_MODE_MASK			BIT(10)
+#define OMAP4430_CONTINUOUS_MODE_MASK			BIT(10)
 #define OMAP4430_BGAP_TEMP_SENSOR_SOC_MASK		BIT(9)
 #define OMAP4430_BGAP_TEMP_SENSOR_EOCZ_MASK		BIT(8)
 #define OMAP4430_BGAP_TEMP_SENSOR_DTEMP_MASK		(0xff << 0)
@@ -113,7 +113,7 @@
 #define OMAP4460_BGAP_TEMP_SENSOR_DTEMP_MASK		(0x3ff << 0)
 
 /* OMAP4460.BANDGAP_CTRL bits */
-#define OMAP4460_SINGLE_MODE_MASK			BIT(31)
+#define OMAP4460_CONTINUOUS_MODE_MASK			BIT(31)
 #define OMAP4460_MASK_HOT_MASK				BIT(1)
 #define OMAP4460_MASK_COLD_MASK				BIT(0)
 
-- 
2.29.2