[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20210103012544.3259029-1-martin.blumenstingl@googlemail.com>
Date: Sun, 3 Jan 2021 02:25:42 +0100
From: Martin Blumenstingl <martin.blumenstingl@...glemail.com>
To: hauke@...ke-m.de, netdev@...r.kernel.org
Cc: andrew@...n.ch, vivien.didelot@...il.com, f.fainelli@...il.com,
olteanv@...il.com, davem@...emloft.net, kuba@...nel.org,
linux-kernel@...r.kernel.org,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>
Subject: [PATCH 0/2] net: dsa: lantiq_gswip: two fixes for -net/-stable
While testing the lantiq_gswip driver in OpenWrt at least one board had
a non-working Ethernet port connected to an internal 100Mbit/s PHY22F
GPHY. The problem which could be observed:
- the PHY would detect the link just fine
- ethtool stats would see the TX counter rise
- the RX counter in ethtool was stuck at zero
It turns out that two independent patches are needed to fix this:
- first we need to enable the MII data lines also for internal PHYs
- second we need to program the GSWIP_MII_CFG registers for all ports
except the CPU port
These two patches have also been tested by back-porting them on top of
Linux 5.4.86 in OpenWrt.
Special thanks to Hauke for debugging and brainstorming this on IRC
with me!
Martin Blumenstingl (2):
net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs
net: dsa: lantiq_gswip: Fix GSWIP_MII_CFG(p) register access
drivers/net/dsa/lantiq_gswip.c | 27 +++++++--------------------
1 file changed, 7 insertions(+), 20 deletions(-)
--
2.30.0
Powered by blists - more mailing lists