lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sun,  3 Jan 2021 05:17:43 -0600
From:   Samuel Holland <samuel@...lland.org>
To:     Giuseppe Cavallaro <peppe.cavallaro@...com>,
        Alexandre Torgue <alexandre.torgue@...com>,
        Jose Abreu <joabreu@...opsys.com>,
        "David S. Miller" <davem@...emloft.net>,
        Jakub Kicinski <kuba@...nel.org>,
        Maxime Ripard <mripard@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...l.net>,
        Corentin Labbe <clabbe@...libre.com>
Cc:     Ondrej Jirman <megous@...ous.com>, netdev@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-sunxi@...glegroups.com, Samuel Holland <samuel@...lland.org>
Subject: [PATCH net 3/4] net: stmmac: dwmac-sun8i: Balance internal PHY power

sun8i_dwmac_exit calls sun8i_dwmac_unpower_internal_phy, but
sun8i_dwmac_init did not call sun8i_dwmac_power_internal_phy. This
caused PHY power to remain off after a suspend/resume cycle. Fix this by
recording if PHY power should be restored, and if so, restoring it.

Fixes: 634db83b8265 ("net: stmmac: dwmac-sun8i: Handle integrated/external MDIOs")
Signed-off-by: Samuel Holland <samuel@...lland.org>
---
 .../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 31 ++++++++++++++-----
 1 file changed, 23 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
index a05dee5d4584..e2c25c1c702a 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c
@@ -64,6 +64,7 @@ struct emac_variant {
  * @variant:	reference to the current board variant
  * @regmap:	regmap for using the syscon
  * @internal_phy_powered: Does the internal PHY is enabled
+ * @use_internal_phy: Is the internal PHY selected for use
  * @mux_handle:	Internal pointer used by mdio-mux lib
  */
 struct sunxi_priv_data {
@@ -74,6 +75,7 @@ struct sunxi_priv_data {
 	const struct emac_variant *variant;
 	struct regmap_field *regmap_field;
 	bool internal_phy_powered;
+	bool use_internal_phy;
 	void *mux_handle;
 };
 
@@ -539,8 +541,11 @@ static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = {
 	.dma_interrupt = sun8i_dwmac_dma_interrupt,
 };
 
+static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv);
+
 static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
 {
+	struct net_device *ndev = platform_get_drvdata(pdev);
 	struct sunxi_priv_data *gmac = priv;
 	int ret;
 
@@ -554,13 +559,25 @@ static int sun8i_dwmac_init(struct platform_device *pdev, void *priv)
 
 	ret = clk_prepare_enable(gmac->tx_clk);
 	if (ret) {
-		if (gmac->regulator)
-			regulator_disable(gmac->regulator);
 		dev_err(&pdev->dev, "Could not enable AHB clock\n");
-		return ret;
+		goto err_disable_regulator;
+	}
+
+	if (gmac->use_internal_phy) {
+		ret = sun8i_dwmac_power_internal_phy(netdev_priv(ndev));
+		if (ret)
+			goto err_disable_clk;
 	}
 
 	return 0;
+
+err_disable_clk:
+	clk_disable_unprepare(gmac->tx_clk);
+err_disable_regulator:
+	if (gmac->regulator)
+		regulator_disable(gmac->regulator);
+
+	return ret;
 }
 
 static void sun8i_dwmac_core_init(struct mac_device_info *hw,
@@ -831,7 +848,6 @@ static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
 	struct sunxi_priv_data *gmac = priv->plat->bsp_priv;
 	u32 reg, val;
 	int ret = 0;
-	bool need_power_ephy = false;
 
 	if (current_child ^ desired_child) {
 		regmap_field_read(gmac->regmap_field, &reg);
@@ -839,13 +855,12 @@ static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
 		case DWMAC_SUN8I_MDIO_MUX_INTERNAL_ID:
 			dev_info(priv->device, "Switch mux to internal PHY");
 			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SELECT;
-
-			need_power_ephy = true;
+			gmac->use_internal_phy = true;
 			break;
 		case DWMAC_SUN8I_MDIO_MUX_EXTERNAL_ID:
 			dev_info(priv->device, "Switch mux to external PHY");
 			val = (reg & ~H3_EPHY_MUX_MASK) | H3_EPHY_SHUTDOWN;
-			need_power_ephy = false;
+			gmac->use_internal_phy = false;
 			break;
 		default:
 			dev_err(priv->device, "Invalid child ID %x\n",
@@ -853,7 +868,7 @@ static int mdio_mux_syscon_switch_fn(int current_child, int desired_child,
 			return -EINVAL;
 		}
 		regmap_field_write(gmac->regmap_field, val);
-		if (need_power_ephy) {
+		if (gmac->use_internal_phy) {
 			ret = sun8i_dwmac_power_internal_phy(priv);
 			if (ret)
 				return ret;
-- 
2.26.2

Powered by blists - more mailing lists