lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <X/MzZAB9jN507p74@hovoldconsulting.com>
Date:   Mon, 4 Jan 2021 16:25:24 +0100
From:   Johan Hovold <johan@...nel.org>
To:     Daniel Palmer <daniel@...f.com>
Cc:     Johan Hovold <johan@...nel.org>, linux-usb@...r.kernel.org,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] USB: serial: option: add LongSung M5710 module support

On Mon, Jan 04, 2021 at 11:29:39PM +0900, Daniel Palmer wrote:
> Hi Johan,
> 
> On Mon, 4 Jan 2021 at 19:32, Johan Hovold <johan@...nel.org> wrote:
> 
> > Also, would you mind posting the "lsusb -v" output for this device for
> > reference?
> 
> The lsusb from busybox on this system doesn't support the -v option it seems.
> Here is the output from /sys/kernel/debug/usb/devices:
> 
> T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=480  MxCh= 0
> D:  Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs=  1
> P:  Vendor=2df3 ProdID=9d03 Rev= 1.00
> S:  Manufacturer=Marvell
> S:  Product=Mobile Composite Device Bus
> S:  SerialNumber=<snip>
> C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA
> A:  FirstIf#= 0 IfCount= 2 Cls=e0(wlcon) Sub=01 Prot=03
> I:* If#= 0 Alt= 0 #EPs= 1 Cls=e0(wlcon) Sub=01 Prot=03 Driver=rndis_host
> E:  Ad=87(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
> I:* If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=rndis_host
> E:  Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=0c(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=89(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
> E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=0f(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option
> E:  Ad=88(I) Atr=03(Int.) MxPS=  64 Ivl=4096ms
> E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> E:  Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> 
> I can rebuild my rootfs with the usbutils lsusb tomorrow when I have
> physical access to it again if needed.

That's ok, the above will do just fine.

It looks like we must not try to bind to the first two interfaces
however:

	{ USB_DEVICE_INTERFACE_CLASS(0x2df3, 0x9d03, 0xff) },			/* LongSung M5710 */

> >Do you know what each interface is used for?
> 
> The second tty responds to AT commands. The others don't do anything so far.
> The hardware documentation doesn't say much aside that there is a usb interface.

Ok, thanks. I'll apply this one with the above change now.

Johan

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ