| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20210104180724.2275098-1-robh@kernel.org>
Date: Mon, 4 Jan 2021 11:07:23 -0700
From: Rob Herring <robh@...nel.org>
To: dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org
Cc: linux-kernel@...r.kernel.org,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>,
Maxime Ripard <mripard@...nel.org>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Thomas Zimmermann <tzimmermann@...e.de>
Subject: [PATCH] dt-bindings: display: Use OF graph schema
Now that we have a graph schema, rework the display related schemas to use
it. Mostly this is adding a reference to graph.yaml and dropping duplicate
parts from schemas.
In panel-common.yaml, 'ports' is dropped. Any binding using 'ports'
should be one with more than 1 port node, and the binding must define
what each port is.
Note that ti,sn65dsi86.yaml, ti,tfp410,yaml and toshiba,tc358768.yaml will
need further updates to use video-interfaces.yaml once that lands.
Cc: Thierry Reding <thierry.reding@...il.com>
Cc: Sam Ravnborg <sam@...nborg.org>
Cc: Laurent Pinchart <laurent.pinchart+renesas@...asonboard.com>
Cc: Maxime Ripard <mripard@...nel.org>
Cc: Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>
Cc: Thomas Zimmermann <tzimmermann@...e.de>
Signed-off-by: Rob Herring <robh@...nel.org>
---
v3:
- Rework based on graph.yaml changes. 'port' nodes now have a $ref and
endpoint nodes do too if they define additional properties.
- Convert ste,mcde.yaml
v2:
- Drop 'type: object' where we have a $ref
- Drop any common properties like 'reg', '#address-cells', "#size-cells',
'remote-endpoint'
- Keep description in ti,k2g-dss.yaml
---
.../allwinner,sun4i-a10-display-backend.yaml | 23 +---
.../allwinner,sun4i-a10-display-frontend.yaml | 19 +--
.../display/allwinner,sun4i-a10-hdmi.yaml | 19 +--
.../display/allwinner,sun4i-a10-tcon.yaml | 25 +---
.../allwinner,sun4i-a10-tv-encoder.yaml | 6 +-
.../display/allwinner,sun6i-a31-drc.yaml | 19 +--
.../display/allwinner,sun6i-a31-mipi-dsi.yaml | 6 +-
.../allwinner,sun8i-a83t-de2-mixer.yaml | 19 +--
.../display/allwinner,sun8i-a83t-dw-hdmi.yaml | 19 +--
.../display/allwinner,sun8i-r40-tcon-top.yaml | 110 ++----------------
.../display/allwinner,sun9i-a80-deu.yaml | 19 +--
.../display/amlogic,meson-dw-hdmi.yaml | 4 +-
.../bindings/display/amlogic,meson-vpu.yaml | 4 +-
.../bindings/display/brcm,bcm2835-dpi.yaml | 7 +-
.../display/bridge/analogix,anx7625.yaml | 6 +-
.../display/bridge/analogix,anx7814.yaml | 19 +--
.../bindings/display/bridge/anx6345.yaml | 18 +--
.../display/bridge/cdns,mhdp8546.yaml | 22 +---
.../display/bridge/chrontel,ch7033.yaml | 6 +-
.../display/bridge/intel,keembay-dsi.yaml | 14 +--
.../bindings/display/bridge/ite,it6505.yaml | 2 +-
.../display/bridge/lontium,lt9611.yaml | 70 ++---------
.../bindings/display/bridge/lvds-codec.yaml | 18 +--
.../bindings/display/bridge/nwl-dsi.yaml | 41 ++-----
.../bindings/display/bridge/ps8640.yaml | 24 +---
.../bindings/display/bridge/renesas,lvds.yaml | 18 +--
.../display/bridge/simple-bridge.yaml | 18 +--
.../display/bridge/snps,dw-mipi-dsi.yaml | 7 +-
.../display/bridge/thine,thc63lvd1024.yaml | 21 +---
.../bindings/display/bridge/ti,sn65dsi86.yaml | 45 +------
.../bindings/display/bridge/ti,tfp410.yaml | 24 +---
.../display/bridge/toshiba,tc358762.yaml | 52 +--------
.../display/bridge/toshiba,tc358768.yaml | 48 +-------
.../display/bridge/toshiba,tc358775.yaml | 19 +--
.../connector/analog-tv-connector.yaml | 1 +
.../display/connector/dvi-connector.yaml | 1 +
.../display/connector/hdmi-connector.yaml | 1 +
.../display/connector/vga-connector.yaml | 1 +
.../bindings/display/imx/nxp,imx8mq-dcss.yaml | 2 +-
.../bindings/display/ingenic,lcd.yaml | 10 +-
.../display/intel,keembay-display.yaml | 2 +-
.../display/panel/advantech,idk-2121wr.yaml | 21 ++--
.../bindings/display/panel/panel-common.yaml | 11 +-
.../rockchip/rockchip,rk3066-hdmi.yaml | 16 +--
.../display/rockchip/rockchip-vop.yaml | 5 +-
.../bindings/display/st,stm32-dsi.yaml | 12 +-
.../bindings/display/st,stm32-ltdc.yaml | 8 +-
.../devicetree/bindings/display/ste,mcde.yaml | 5 +-
.../bindings/display/ti/ti,am65x-dss.yaml | 19 +--
.../bindings/display/ti/ti,j721e-dss.yaml | 23 +---
.../bindings/display/ti/ti,k2g-dss.yaml | 3 +-
51 files changed, 185 insertions(+), 747 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
index 86057d541065..12a7df0e38b2 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-backend.yaml
@@ -84,36 +84,23 @@ properties:
const: dma-mem
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Input endpoints of the controller.
port@1:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Output endpoints of the controller.
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
index 3eb1c2bbf4e7..055157fbf3bf 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-display-frontend.yaml
@@ -57,35 +57,22 @@ properties:
maxItems: 1
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoints of the controller.
required:
- - "#address-cells"
- - "#size-cells"
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
index 75e6479397a5..7f11452539f4 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-hdmi.yaml
@@ -76,37 +76,24 @@ properties:
- const: audio-tx
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoints of the controller. Usually an HDMI
connector.
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
index 4c15a2644a7c..c13faf3e6581 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
@@ -115,31 +115,24 @@ properties:
- const: lvds
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: |
Output endpoints of the controller.
patternProperties:
"^endpoint(@[0-9])$":
- type: object
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
properties:
allwinner,tcon-channel:
@@ -156,16 +149,10 @@ properties:
property is not present, the endpoint number will be
used as the channel number.
- unevaluatedProperties: true
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
index 6009324be967..afc0ed799e0e 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tv-encoder.yaml
@@ -24,11 +24,9 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
- A port node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. The
- first port should be the input endpoint, usually coming from the
+ The first port should be the input endpoint, usually coming from the
associated TCON.
required:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
index 0c1ce55940e1..71cce5687580 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-drc.yaml
@@ -46,36 +46,23 @@ properties:
maxItems: 1
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoints of the controller.
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
index 7aa330dabc44..a738d7c12a97 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun6i-a31-mipi-dsi.yaml
@@ -47,11 +47,9 @@ properties:
const: dphy
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
- A port node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt. That
- port should be the input endpoint, usually coming from the
+ The port should be the input endpoint, usually coming from the
associated TCON.
required:
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
index c040eef56518..4f91eec26de9 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml
@@ -43,35 +43,22 @@ properties:
maxItems: 1
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoints of the controller.
required:
- - "#address-cells"
- - "#size-cells"
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
index fa4769a0b26e..b3e9992525c2 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-dw-hdmi.yaml
@@ -93,38 +93,25 @@ properties:
The VCC power supply of the controller
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller. Usually the associated
TCON.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoints of the controller. Usually an HDMI
connector.
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
index b98ca609824b..ec21e8bf2767 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun8i-r40-tcon-top.yaml
@@ -80,141 +80,45 @@ properties:
maxItems: 1
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
- All ports should have only one endpoint connected to
- remote endpoint.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoint for Mixer 0 mux.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoint for Mixer 0 mux
- properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
- reg: true
-
- patternProperties:
- "^endpoint@[0-9]$":
- type: object
-
- properties:
- reg:
- description: |
- ID of the target TCON
-
- required:
- - reg
-
- required:
- - "#address-cells"
- - "#size-cells"
-
- additionalProperties: false
-
port@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoint for Mixer 1 mux.
port@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoint for Mixer 1 mux
- properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
- reg: true
-
- patternProperties:
- "^endpoint@[0-9]$":
- type: object
-
- properties:
- reg:
- description: |
- ID of the target TCON
-
- required:
- - reg
-
- required:
- - "#address-cells"
- - "#size-cells"
-
- additionalProperties: false
-
port@4:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoint for HDMI mux.
- properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
- reg: true
-
- patternProperties:
- "^endpoint@[0-9]$":
- type: object
-
- properties:
- reg:
- description: |
- ID of the target TCON
-
- required:
- - reg
-
- required:
- - "#address-cells"
- - "#size-cells"
-
- additionalProperties: false
-
port@5:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoint for HDMI mux
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- port@4
- port@5
- additionalProperties: false
-
required:
- "#clock-cells"
- compatible
diff --git a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
index 96de41d32b3e..637372ec4614 100644
--- a/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
+++ b/Documentation/devicetree/bindings/display/allwinner,sun9i-a80-deu.yaml
@@ -40,36 +40,23 @@ properties:
maxItems: 1
ports:
- type: object
- description: |
- A ports node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Input endpoints of the controller.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Output endpoints of the controller.
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
index 0da42ab8fd3a..cf5a208f2f10 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -81,12 +81,12 @@ properties:
description: phandle to an external 5V regulator to power the HDMI logic
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
A port node pointing to the VENC Input port node.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
A port node pointing to the TMDS Output port node.
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
index a8d202c9d004..851cb0781217 100644
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -83,12 +83,12 @@ properties:
description: phandle to the associated power domain
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
A port node pointing to the CVBS VDAC port node.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
A port node pointing to the HDMI-TX port node.
diff --git a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
index 5c1024bbc1b3..c9ad0ecc9b6d 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
+++ b/Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
@@ -27,10 +27,9 @@ properties:
- const: pixel
port:
- type: object
- description: >
- Port node with a single endpoint connecting to the panel, as
- defined in Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
+ Port node with a single endpoint connecting to the panel.
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
index 60585a4fc22b..d08b71dc5f75 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7625.yaml
@@ -35,16 +35,16 @@ properties:
maxItems: 1
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Video port for MIPI DSI input.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Video port for panel or connector.
diff --git a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
index 3ba477aefdd7..8e13f27b28ed 100644
--- a/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/analogix,anx7814.yaml
@@ -42,31 +42,18 @@ properties:
description: Regulator for 1.0V digital core power.
ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint
- definitions as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
- Documentation/devicetree/bindings/graph.txt
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Video port for HDMI input.
- properties:
- reg:
- const: 0
-
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Video port for SlimPort, DisplayPort, eDP or MyDP output.
- properties:
- reg:
- const: 1
-
required:
- port@0
- port@1
diff --git a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
index 8c0e4f285fbc..ccf41688f0bb 100644
--- a/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/anx6345.yaml
@@ -34,31 +34,23 @@ properties:
description: Regulator for 2.5V digital core power.
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
port@0:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Video port for LVTTL input
port@1:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Video port for eDP output (panel or connector).
May be omitted if EDID works reliably.
required:
- port@0
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
index 74d675fc6e7b..63427878715e 100644
--- a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp8546.yaml
@@ -57,47 +57,37 @@ properties:
maxItems: 1
ports:
- type: object
- description:
- Ports as described in Documentation/devicetree/bindings/graph.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
First input port representing the DP bridge input.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Second input port representing the DP bridge input.
port@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Third input port representing the DP bridge input.
port@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Fourth input port representing the DP bridge input.
port@4:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Output port representing the DP bridge output.
required:
- port@0
- port@4
- - '#address-cells'
- - '#size-cells'
allOf:
- if:
diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
index 9f38f55fc990..bb6289c7d375 100644
--- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -19,16 +19,16 @@ properties:
description: I2C address of the device
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Video port for RGB input.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
DVI port, should be connected to a node compatible with the
dvi-connector binding.
diff --git a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
index ab5be2625224..dcb1336ee2a5 100644
--- a/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/intel,keembay-dsi.yaml
@@ -35,29 +35,21 @@ properties:
- const: clk_mipi_cfg
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: MIPI DSI input port.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: DSI output port.
required:
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
index efbb3d0117dc..eedf8b7f5173 100644
--- a/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ite,it6505.yaml
@@ -55,7 +55,7 @@ properties:
description: extcon specifier for the Power Delivery
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: A port node pointing to DPI host port node
required:
diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
index 7a1c89b995e2..5b9d36f7af30 100644
--- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
@@ -38,82 +38,26 @@ properties:
description: Regulator for 3.3V IO power.
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Primary MIPI port-1 for MIPI input
- properties:
- reg:
- const: 0
-
- patternProperties:
- "^endpoint(@[0-9])$":
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint:
- $ref: /schemas/types.yaml#/definitions/phandle
-
- required:
- - reg
-
port@1:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Additional MIPI port-2 for MIPI input, used in combination
with primary MIPI port-1 to drive higher resolution displays
- properties:
- reg:
- const: 1
-
- patternProperties:
- "^endpoint(@[0-9])$":
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint:
- $ref: /schemas/types.yaml#/definitions/phandle
-
- required:
- - reg
-
port@2:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
HDMI port for HDMI output
- properties:
- reg:
- const: 2
-
- patternProperties:
- "^endpoint(@[0-9])$":
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint:
- $ref: /schemas/types.yaml#/definitions/phandle
-
- required:
- - reg
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@2
diff --git a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
index e5e3c72630cf..717d09fffd11 100644
--- a/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/lvds-codec.yaml
@@ -45,25 +45,17 @@ properties:
- thine,thc63lvdm83d # For the THC63LVDM83D LVDS serializer
ports:
- type: object
- description: |
- This device has two video ports. Their connections are modeled using the
- OF graph bindings specified in Documentation/devicetree/bindings/graph.txt
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
For LVDS encoders, port 0 is the parallel input
For LVDS decoders, port 0 is the LVDS input
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
For LVDS encoders, port 1 is the LVDS output
For LVDS decoders, port 1 is the parallel output
@@ -72,8 +64,6 @@ properties:
- port@0
- port@1
- additionalProperties: false
-
powerdown-gpios:
description:
The GPIO used to control the power down line of this device.
diff --git a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
index a125b2dd3a2f..350fb8f400f0 100644
--- a/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/nwl-dsi.yaml
@@ -84,40 +84,23 @@ properties:
- const: pclk
ports:
- type: object
- description:
- A node containing DSI input & output port nodes with endpoint
- definitions as documented in
- Documentation/devicetree/bindings/graph.txt.
+ $ref: /schemas/graph.yaml#/properties/ports
+
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
description:
Input port node to receive pixel data from the
display controller. Exactly one endpoint must be
specified.
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
endpoint@0:
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: sub-node describing the input from LCDIF
- type: object
endpoint@1:
+ $ref: /schemas/graph.yaml#/properties/endpoint
description: sub-node describing the input from DCSS
- type: object
-
- reg:
- const: 0
-
- required:
- - '#address-cells'
- - '#size-cells'
- - reg
oneOf:
- required:
@@ -125,28 +108,18 @@ properties:
- required:
- endpoint@1
- additionalProperties: false
+ unevaluatedProperties: false
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
DSI output port node to the panel or the next bridge
in the chain
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
required:
- - '#address-cells'
- - '#size-cells'
- port@0
- port@1
- additionalProperties: false
-
required:
- '#address-cells'
- '#size-cells'
diff --git a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
index 7e27cfcf770d..db85e12e7b98 100644
--- a/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ps8640.yaml
@@ -43,34 +43,22 @@ properties:
description: Regulator for 3.3V digital core power.
ports:
- type: object
- description:
- A node containing DSI input & output port nodes with endpoint
- definitions as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
- Documentation/devicetree/bindings/graph.txt
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
port@0:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Video port for DSI input
port@1:
- type: object
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Video port for eDP output (panel or connector).
required:
- port@0
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
index e5b163951b91..d74022cc6e29 100644
--- a/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
@@ -49,33 +49,21 @@ properties:
maxItems: 1
ports:
- type: object
- description: |
- This device has two video ports. Their connections are modelled using the
- OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
- Each port shall have a single endpoint.
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Parallel RGB input port
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: LVDS output port
required:
- port@0
- port@1
- additionalProperties: false
-
power-domains:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
index 3ddb35fcf0a2..45f8701d0514 100644
--- a/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/simple-bridge.yaml
@@ -30,31 +30,21 @@ properties:
- ti,ths8135
ports:
- type: object
- description: |
- This device has two video ports. Their connections are modeled using the
- OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
- properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: The bridge input
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: The bridge output
required:
- port@0
- port@1
- additionalProperties: false
-
enable-gpios:
maxItems: 1
description: GPIO controlling bridge enable
diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
index e42cb610f545..3c3e51af154b 100644
--- a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
@@ -47,14 +47,15 @@ properties:
const: apb
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Input node to receive pixel data.
+
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: DSI output node to panel.
required:
diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
index 469ac4a34273..4f19a72122bd 100644
--- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
@@ -25,11 +25,8 @@ properties:
const: thine,thc63lvd1024
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
description: |
- This device has four video ports. Their connections are modeled using the
- OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
-
The device can operate in single-link mode or dual-link mode. In
single-link mode, all pixels are received on port@0, and port@1 shall not
contain any endpoint. In dual-link mode, even-numbered pixels are
@@ -37,34 +34,26 @@ properties:
port@1 shall contain endpoints.
properties:
- '#address-cells':
- const: 1
-
- '#size-cells':
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: First LVDS input port
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Second LVDS input port
port@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: First digital CMOS/TTL parallel output
port@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Second digital CMOS/TTL parallel output
required:
- port@0
- port@2
- additionalProperties: false
-
oe-gpios:
maxItems: 1
description: Output enable GPIO signal, pin name "OE", active high.
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
index f8622bd0f61e..26932d2e86ab 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi86.yaml
@@ -71,54 +71,26 @@ properties:
description: See ../../pwm/pwm.yaml for description of the cell formats.
ports:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
- additionalProperties: false
-
+ $ref: /schemas/graph.yaml#/properties/port
description:
Video port for MIPI DSI input
- properties:
- reg:
- const: 0
-
- endpoint:
- type: object
- additionalProperties: false
- properties:
- remote-endpoint: true
-
- required:
- - reg
-
port@1:
- type: object
- additionalProperties: false
-
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description:
Video port for eDP output (panel or connector).
properties:
- reg:
- const: 1
-
endpoint:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
properties:
- remote-endpoint: true
-
data-lanes:
oneOf:
- minItems: 1
@@ -171,12 +143,7 @@ properties:
dependencies:
lane-polarities: [data-lanes]
- required:
- - reg
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
diff --git a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
index 605831c1e836..4c5dd8ec2951 100644
--- a/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/ti,tfp410.yaml
@@ -31,23 +31,18 @@ properties:
maximum: 7
ports:
- description:
- A node containing input and output port nodes with endpoint
- definitions as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: DPI input port.
- type: object
properties:
- reg:
- const: 0
-
endpoint:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
properties:
pclk-sample:
@@ -67,15 +62,8 @@ properties:
default: 24
port@1:
+ $ref: /schemas/graph.yaml#/properties/port
description: DVI output port.
- type: object
-
- properties:
- reg:
- const: 1
-
- endpoint:
- type: object
required:
- port@0
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
index 195025e6803c..5216c27fc0ad 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358762.yaml
@@ -25,62 +25,20 @@ properties:
description: Regulator for 1.2V internal core power.
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
- additionalProperties: false
-
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Video port for MIPI DSI input
- properties:
- reg:
- const: 0
-
- patternProperties:
- endpoint:
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint: true
-
- required:
- - reg
-
port@1:
- type: object
- additionalProperties: false
-
- description: |
+ $ref: /schemas/graph.yaml#/properties/port
+ description:
Video port for MIPI DPI output (panel or connector).
- properties:
- reg:
- const: 1
-
- patternProperties:
- endpoint:
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint: true
-
- required:
- - reg
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
index c036a75db8f7..eacfe7165083 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358768.yaml
@@ -42,65 +42,30 @@ properties:
const: refclk
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
- additionalProperties: false
-
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: |
Video port for RGB input
properties:
- reg:
- const: 0
-
- patternProperties:
endpoint:
- type: object
- additionalProperties: false
+ $ref: /schemas/graph.yaml#/$defs/endpoint-base
+ unevaluatedProperties: false
properties:
data-lines:
enum: [ 16, 18, 24 ]
- remote-endpoint: true
-
- required:
- - reg
-
port@1:
- type: object
- additionalProperties: false
-
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Video port for DSI output (panel or connector).
- properties:
- reg:
- const: 1
-
- patternProperties:
- endpoint:
- type: object
- additionalProperties: false
-
- properties:
- remote-endpoint: true
-
- required:
- - reg
-
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
@@ -156,4 +121,3 @@ examples:
};
};
};
-
diff --git a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
index fd3113aa9ccd..f018cabf0e44 100644
--- a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
@@ -44,31 +44,22 @@ properties:
description: Hardware reset, Low active
ports:
- type: object
- description:
- A node containing input and output port nodes with endpoint definitions
- as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
- properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
DSI Input. The remote endpoint phandle should be a
reference to a valid mipi_dsi_host device node.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Video port for LVDS output (panel or connector).
port@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: |
Video port for Dual link LVDS output (panel or connector).
diff --git a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml
index eebe88fed999..a31ca2d52b86 100644
--- a/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/analog-tv-connector.yaml
@@ -25,6 +25,7 @@ properties:
$ref: /schemas/types.yaml#/definitions/uint32
port:
+ $ref: /schemas/graph.yaml#/properties/port
description: Connection to controller providing analog TV signals
required:
diff --git a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
index 71cb9220fa59..93eb14294e68 100644
--- a/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/dvi-connector.yaml
@@ -36,6 +36,7 @@ properties:
description: the connector has pins for DVI dual-link
port:
+ $ref: /schemas/graph.yaml#/properties/port
description: Connection to controller providing DVI signals
required:
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
index 14d7128af592..83c0d008265b 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.yaml
@@ -37,6 +37,7 @@ properties:
maxItems: 1
port:
+ $ref: /schemas/graph.yaml#/properties/port
description: Connection to controller providing HDMI signals
required:
diff --git a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml
index 5782c4bb3252..25f868002000 100644
--- a/Documentation/devicetree/bindings/display/connector/vga-connector.yaml
+++ b/Documentation/devicetree/bindings/display/connector/vga-connector.yaml
@@ -20,6 +20,7 @@ properties:
$ref: /schemas/types.yaml#/definitions/phandle
port:
+ $ref: /schemas/graph.yaml#/properties/port
description: Connection to controller providing VGA signals
required:
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
index f1f25aa794d9..0091df9dd73b 100644
--- a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -74,7 +74,7 @@ properties:
- description: Must be 400 MHz
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
diff --git a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
index 768050f30dba..50d2b0a50e8a 100644
--- a/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
+++ b/Documentation/devicetree/bindings/display/ingenic,lcd.yaml
@@ -39,18 +39,18 @@ properties:
minItems: 1
port:
- description: OF graph bindings (specified in bindings/graph.txt).
+ $ref: /schemas/graph.yaml#/properties/port
ports:
- description: OF graph bindings (specified in bindings/graph.txt).
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
+
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: DPI output, to interface with TFT panels.
port@8:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Link to the Image Processing Unit (IPU).
(See ingenic,ipu.yaml).
diff --git a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
index 0a697d45c2ad..bc6622b010ca 100644
--- a/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
+++ b/Documentation/devicetree/bindings/display/intel,keembay-display.yaml
@@ -36,7 +36,7 @@ properties:
maxItems: 1
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description: Display output node to DSI.
required:
diff --git a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
index 6b7fddc80c41..67682fe77f10 100644
--- a/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
+++ b/Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
@@ -37,34 +37,33 @@ properties:
panel-timing: true
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
+
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: The sink for odd pixels.
properties:
- reg:
- const: 0
-
dual-lvds-odd-pixels: true
required:
- - reg
- dual-lvds-odd-pixels
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
description: The sink for even pixels.
properties:
- reg:
- const: 1
-
dual-lvds-even-pixels: true
required:
- - reg
- dual-lvds-even-pixels
+ required:
+ - port@0
+ - port@1
+
additionalProperties: false
required:
diff --git a/Documentation/devicetree/bindings/display/panel/panel-common.yaml b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
index cd6dc5461721..5b38dc89cb21 100644
--- a/Documentation/devicetree/bindings/display/panel/panel-common.yaml
+++ b/Documentation/devicetree/bindings/display/panel/panel-common.yaml
@@ -68,16 +68,7 @@ properties:
# Connectivity
port:
- type: object
-
- ports:
- type: object
- description:
- Panels receive video data through one or multiple connections. While
- the nature of those connections is specific to the panel type, the
- connectivity is expressed in a standard fashion using ports as specified
- in the device graph bindings defined in
- Documentation/devicetree/bindings/graph.txt.
+ $ref: /schemas/graph.yaml#/properties/port
ddc-i2c-bus:
$ref: /schemas/types.yaml#/definitions/phandle
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
index 4110d003ce1f..008c144257cb 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip,rk3066-hdmi.yaml
@@ -43,34 +43,24 @@ properties:
This soc uses GRF regs to switch the HDMI TX input between vop0 and vop1.
ports:
- type: object
+ $ref: /schemas/graph.yaml#/properties/ports
properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
-
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Port node with two endpoints, numbered 0 and 1,
connected respectively to vop0 and vop1.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
Port node with one endpoint connected to a hdmi-connector node.
required:
- - "#address-cells"
- - "#size-cells"
- port@0
- port@1
- additionalProperties: false
-
required:
- compatible
- reg
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
index ed8148e26e24..6f43d885c9b3 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -70,10 +70,7 @@ properties:
- const: dclk
port:
- type: object
- description:
- A port node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt.
+ $ref: /schemas/graph.yaml#/properties/port
assigned-clocks:
maxItems: 2
diff --git a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
index 327a14d85df8..679daed4124e 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-dsi.yaml
@@ -51,20 +51,16 @@ properties:
Phandle of the regulator that provides the supply voltage.
ports:
- type: object
- description:
- A node containing DSI input & output port nodes with endpoint
- definitions as documented in
- Documentation/devicetree/bindings/media/video-interfaces.txt
- Documentation/devicetree/bindings/graph.txt
+ $ref: /schemas/graph.yaml#/properties/ports
+
properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
DSI input port node, connected to the ltdc rgb output port.
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
DSI output port node, connected to a panel or a bridge input port"
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
index bf8ad916e9b0..d54f9ca207af 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.yaml
@@ -35,15 +35,13 @@ properties:
maxItems: 1
port:
- type: object
- description:
- "Video port for DPI RGB output.
+ $ref: /schemas/graph.yaml#/properties/port
+ description: |
+ Video port for DPI RGB output.
ltdc has one video port with up to 2 endpoints:
- for external dpi rgb panel or bridge, using gpios.
- for internal dpi input of the MIPI DSI host controller.
Note: These 2 endpoints cannot be activated simultaneously.
- Please refer to the bindings defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt."
required:
- compatible
diff --git a/Documentation/devicetree/bindings/display/ste,mcde.yaml b/Documentation/devicetree/bindings/display/ste,mcde.yaml
index 830c9b4091cc..de0c678b3c29 100644
--- a/Documentation/devicetree/bindings/display/ste,mcde.yaml
+++ b/Documentation/devicetree/bindings/display/ste,mcde.yaml
@@ -42,10 +42,9 @@ properties:
description: a phandle to the analog voltage regulator
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
- A DPI port node with endpoint definitions as defined in
- Documentation/devicetree/bindings/media/video-interfaces.txt
+ A DPI port node
"#address-cells":
const: 1
diff --git a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
index 4dc30738ee57..781c1868b0b8 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,am65x-dss.yaml
@@ -74,30 +74,19 @@ properties:
type: boolean
ports:
- type: object
- description:
- Ports as described in Documentation/devicetree/bindings/graph.txt
- properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
The DSS OLDI output port node form video port 1
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
The DSS DPI output port node from video port 2
- required:
- - "#address-cells"
- - "#size-cells"
-
ti,am65x-oldi-io-ctrl:
$ref: "/schemas/types.yaml#/definitions/phandle-array"
maxItems: 1
diff --git a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
index c9a947d55fa4..2986f9acc9f0 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,j721e-dss.yaml
@@ -107,40 +107,29 @@ properties:
type: boolean
ports:
- type: object
- description:
- Ports as described in Documentation/devicetree/bindings/graph.txt
- properties:
- "#address-cells":
- const: 1
-
- "#size-cells":
- const: 0
+ $ref: /schemas/graph.yaml#/properties/ports
+ properties:
port@0:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
The output port node form video port 1
port@1:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
The output port node from video port 2
port@2:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
The output port node from video port 3
port@3:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
The output port node from video port 4
- required:
- - "#address-cells"
- - "#size-cells"
-
max-memory-bandwidth:
$ref: /schemas/types.yaml#/definitions/uint32
description:
diff --git a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
index 8f87b82c6695..7ce7bbad5780 100644
--- a/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
+++ b/Documentation/devicetree/bindings/display/ti/ti,k2g-dss.yaml
@@ -54,9 +54,8 @@ properties:
description: phandle to the associated power domain
port:
- type: object
+ $ref: /schemas/graph.yaml#/properties/port
description:
- Port as described in Documentation/devicetree/bindings/graph.txt.
The DSS DPI output port node
max-memory-bandwidth:
--
2.27.0
Powered by blists - more mailing lists