| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <X/UsBWwFR+V0hIOS@audible.transient.net>
Date: Wed, 6 Jan 2021 03:18:29 +0000
From: Jamie Heilman <jamie@...ible.transient.net>
To: Karol Herbst <kherbst@...hat.com>, Ben Skeggs <bskeggs@...hat.com>,
LKML <linux-kernel@...r.kernel.org>,
nouveau <nouveau@...ts.freedesktop.org>
Subject: Re: [Nouveau] nouveau regression post v5.8, still present in v5.10
Jamie Heilman wrote:
> Jamie Heilman wrote:
> > Karol Herbst wrote:
> > > do you think you'd be able to do a kernel bisect in order to pinpoint
> > > the actual commit causing it? Thanks
> >
> > No. I can't reproduce it reliably. I if I could, bisection wouldn't
> > be a problem but as I can't and as it can take weeks for the problem
> > to occur there's essentially no chance. I know it regressed roughly
> > in 5.8-rc1 only because that's what I was running when the first event
> > occured.
>
> er, 5.9.0-rc1 rather
Actually ... I've found a way to reproduce this in hours intead of
weeks, so I think I may be able to bisect it after all, it's something
of a brute force approach and its probably doing horrible things to
the backlight in my poor old monitor, but just running this:
#!/bin/sh
sleep 5
while ! dmesg | tail | grep -q nouveau
do
xset dpms force off
sleep 65
xdotool mousemove 1024 1024 mousemove restore
sleep 10
done
Does manage to trip the issue sooner than it would otherwise happen
with natural usage. Given that this is my primary workstation and I
sort of need it functional during waking hours, it'll take me a bit,
but I'll update folks when I have the error more dialed in.
I'm using git bisect start -- drivers/gpu/drm include/drm include/video
in an effort to make this go a bit quicker, let me know if you think
that's a bad idea or I should add other paths.
> > > On Sun, Dec 27, 2020 at 8:16 PM Jamie Heilman
> > > <jamie@...ible.transient.net> wrote:
> > > >
> > > > Something between v5.8 and v5.9 has resulted in periodically losing video.
> > > > Unfortunately, I can't reliably reproduce it, it seems to happen every
> > > > once in a long while---I can go weeks without an occurance, but it
> > > > always seems to happen after my workstation has been idle long enough
> > > > to screen blank and put the monitor to sleep. I'm using a single
> > > > display (Dell 2405FPW) connected via DVI, running X (Xorg 1.20.x from
> > > > Debian sid). I don't really do anything fancy, xterms, a browser or
> > > > two, play the occasional video, but like I said, I can't reliably
> > > > reproduce this. I've had it happen about 11 times since August.
> > > >
> > > > lspci -vv output is:
> > > >
> > > > 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [Quadro NVS 290] (rev a1) (prog-if 00 [VGA controller])
> > > > Subsystem: NVIDIA Corporation G86 [Quadro NVS 290]
> > > > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
> > > > Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
> > > > Latency: 0, Cache Line Size: 64 bytes
> > > > Interrupt: pin A routed to IRQ 28
> > > > Region 0: Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
> > > > Region 1: Memory at d0000000 (64-bit, prefetchable) [size=256M]
> > > > Region 3: Memory at fa000000 (64-bit, non-prefetchable) [size=32M]
> > > > Region 5: I/O ports at dc80 [size=128]
> > > > Expansion ROM at 000c0000 [disabled] [size=128K]
> > > > Capabilities: [60] Power Management version 2
> > > > Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
> > > > Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
> > > > Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
> > > > Address: 00000000fee01004 Data: 4023
> > > > Capabilities: [78] Express (v1) Endpoint, MSI 00
> > > > DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 <4us
> > > > ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 25.000W
> > > > DevCtl: CorrErr- NonFatalErr+ FatalErr+ UnsupReq-
> > > > RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
> > > > MaxPayload 128 bytes, MaxReadReq 512 bytes
> > > > DevSta: CorrErr- NonFatalErr- FatalErr- UnsupReq- AuxPwr- TransPend-
> > > > LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
> > > > ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp-
> > > > LnkCtl: ASPM Disabled; RCB 64 bytes, Disabled- CommClk+
> > > > ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
> > > > LnkSta: Speed 2.5GT/s (ok), Width x16 (ok)
> > > > TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
> > > > Capabilities: [100 v1] Virtual Channel
> > > > Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
> > > > Arb: Fixed- WRR32- WRR64- WRR128-
> > > > Ctrl: ArbSelect=Fixed
> > > > Status: InProgress-
> > > > VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
> > > > Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
> > > > Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
> > > > Status: NegoPending- InProgress-
> > > > Capabilities: [128 v1] Power Budgeting <?>
> > > > Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
> > > > Kernel driver in use: nouveau
> > > >
> > > > The last time this happened, this is what got logged:
> > > >
> > > > nouveau 0000:01:00.0: disp: ERROR 5 [INVALID_STATE] 06 [] chid 1 mthd 0080 data 00000001
> > > > nouveau 0000:01:00.0: disp: Base 1:
> > > > nouveau 0000:01:00.0: disp: 0084: 00000000
> > > > nouveau 0000:01:00.0: disp: 0088: 00000000
> > > > nouveau 0000:01:00.0: disp: 008c: 00000000
> > > > nouveau 0000:01:00.0: disp: 0090: 00000000
> > > > nouveau 0000:01:00.0: disp: 0094: 00000000
> > > > nouveau 0000:01:00.0: disp: 00a0: 00000060 -> 00000070
> > > > nouveau 0000:01:00.0: disp: 00a4: 00000000 -> f0000000
> > > > nouveau 0000:01:00.0: disp: 00c0: 00000000
> > > > nouveau 0000:01:00.0: disp: 00c4: 00000000
> > > > nouveau 0000:01:00.0: disp: 00c8: 00000000
> > > > nouveau 0000:01:00.0: disp: 00cc: 00000000
> > > > nouveau 0000:01:00.0: disp: 00e0: 40000000
> > > > nouveau 0000:01:00.0: disp: 00e4: 00000000
> > > > nouveau 0000:01:00.0: disp: 00e8: 00000000
> > > > nouveau 0000:01:00.0: disp: 00ec: 00000000
> > > > nouveau 0000:01:00.0: disp: 00fc: 00000000
> > > > nouveau 0000:01:00.0: disp: 0100: fffe0000
> > > > nouveau 0000:01:00.0: disp: 0104: 00000000
> > > > nouveau 0000:01:00.0: disp: 0110: 00000000
> > > > nouveau 0000:01:00.0: disp: 0114: 00000000
> > > > nouveau 0000:01:00.0: disp: Base 1 - Image 0:
> > > > nouveau 0000:01:00.0: disp: 0800: 00009500
> > > > nouveau 0000:01:00.0: disp: 0804: 00000000
> > > > nouveau 0000:01:00.0: disp: 0808: 04b00780
> > > > nouveau 0000:01:00.0: disp: 080c: 00007804
> > > > nouveau 0000:01:00.0: disp: 0810: 0000cf00
> > > > nouveau 0000:01:00.0: disp: Base 1 - Image 1:
> > > > nouveau 0000:01:00.0: disp: 0c00: 00009500
> > > > nouveau 0000:01:00.0: disp: 0c04: 00000000
> > > > nouveau 0000:01:00.0: disp: 0c08: 04b00780
> > > > nouveau 0000:01:00.0: disp: 0c0c: 00007804
> > > > nouveau 0000:01:00.0: disp: 0c10: 0000cf00
> > > > nouveau 0000:01:00.0: disp: ERROR 5 [INVALID_STATE] 06 [] chid 1 mthd 0080 data 00000001
> > > > nouveau 0000:01:00.0: disp: Base 1:
> > > > nouveau 0000:01:00.0: disp: 0084: 00000000
> > > > nouveau 0000:01:00.0: disp: 0088: 00000000
> > > > nouveau 0000:01:00.0: disp: 008c: 00000000
> > > > nouveau 0000:01:00.0: disp: 0090: 00000000
> > > > nouveau 0000:01:00.0: disp: 0094: 00000000
> > > > nouveau 0000:01:00.0: disp: 00a0: 00000060 -> 00000070
> > > > nouveau 0000:01:00.0: disp: 00a4: 00000000 -> f0000000
> > > > nouveau 0000:01:00.0: disp: 00c0: 00000000
> > > > nouveau 0000:01:00.0: disp: 00c4: 00000000
> > > > nouveau 0000:01:00.0: disp: 00c8: 00000000
> > > > nouveau 0000:01:00.0: disp: 00cc: 00000000
> > > > nouveau 0000:01:00.0: disp: 00e0: 40000000
> > > > nouveau 0000:01:00.0: disp: 00e4: 00000000
> > > > nouveau 0000:01:00.0: disp: 00e8: 00000000
> > > > nouveau 0000:01:00.0: disp: 00ec: 00000000
> > > > nouveau 0000:01:00.0: disp: 00fc: 00000000
> > > > nouveau 0000:01:00.0: disp: 0100: fffe0000
> > > > nouveau 0000:01:00.0: disp: 0104: 00000000
> > > > nouveau 0000:01:00.0: disp: 0110: 00000000
> > > > nouveau 0000:01:00.0: disp: 0114: 00000000
> > > > nouveau 0000:01:00.0: disp: Base 1 - Image 0:
> > > > nouveau 0000:01:00.0: disp: 0800: 00009500
> > > > nouveau 0000:01:00.0: disp: 0804: 00000000
> > > > nouveau 0000:01:00.0: disp: 0808: 04b00780
> > > > nouveau 0000:01:00.0: disp: 080c: 00007804
> > > > nouveau 0000:01:00.0: disp: 0810: 0000cf00
> > > > nouveau 0000:01:00.0: disp: Base 1 - Image 1:
> > > > nouveau 0000:01:00.0: disp: 0c00: 00009500
> > > > nouveau 0000:01:00.0: disp: 0c04: 00000000
> > > > nouveau 0000:01:00.0: disp: 0c08: 04b00780
> > > > nouveau 0000:01:00.0: disp: 0c0c: 00007804
> > > > nouveau 0000:01:00.0: disp: 0c10: 0000cf00
> > > > nouveau 0000:01:00.0: DRM: core notifier timeout
> > > > nouveau 0000:01:00.0: DRM: base-0: timeout
> > > >
> > > > I've got logs of all of this, if they help I can collect them. The
> > > > timeout message are consistent the error messages a little less so.
> > > >
> > > > If there's more debugging I can do when this happens, I'd love to know
> > > > what it is.
> > > >
> > > > kernel config: http://audible.transient.net/~jamie/k/nouveau.config-5.10.0
> > > > dmesg at boot: http://audible.transient.net/~jamie/k/nouveau.dmesg
> > > >
> > > > --
> > > > Jamie Heilman http://audible.transient.net/~jamie/
> > > > _______________________________________________
> > > > Nouveau mailing list
> > > > Nouveau@...ts.freedesktop.org
> > > > https://lists.freedesktop.org/mailman/listinfo/nouveau
> > > >
> > >
> >
> > --
> > Jamie Heilman http://audible.transient.net/~jamie/
>
> --
> Jamie Heilman http://audible.transient.net/~jamie/
--
Jamie Heilman http://audible.transient.net/~jamie/
Powered by blists - more mailing lists